HHR Performance » 2019, Honda

Description: Smooth Velocity stacks for Honda CBR1000RR 2017+
Please note these do not fit the CBR1000RR-R Fireblade from 2020+ which has a different airbox

Description: Full length Air intake tubes

Description: Replacement fuel tank cover

Description: Replacement left side fairing with Dzus

Description: Carbonin Avio Fiber Replacement Seat Pan 17-19 Honda CBR 1000RR
-Carbon Fiber reinforced
-Honey Comb Avio Fiber glass reinforcement
-Part of the Carbonin tail unit
-Made for use with the Carbonin seat foam unit

Description: Replacement right side fairing with Dzus

Description: Replacement upper fairing with Dzus

Description: Carbon fiber airbox inlet tubes

Description: Replacement gast tank cover for carbonin bodywork

Description: Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands

Description: Carbon fiber rear fender oem replacement

Description: Carbonin Carbon Fiber SBK UK Front Fender 2017-2020 Honda CBR1000RR
*Made with Honda Racing UK to specifically fit Ohlins SBK Forks

Description: Whether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:

Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.

These are light-weight and do not interfere with any OEM bodywork.

These also look great and give your bike a great appearance

Description: Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands

Description: Steel spacers used to mount seat pan* Required

Description: STD CBR1000RR seat for Carbonin bodywork
This will only fit with carbonin bodywork and requires brackets ALU1804H for fitment

Description: Cordona GP ASG Superbike Quickshifter-Blipper, Honda CBR1000RR SP1/SP2 425std


Analogue Strain Gauge Load Cell for ECU’s with upshifts and auto blipper for downshifts. Used from advanced ECU’s as Magneti-Marelli, Motec, Mectronik, MotoGP ECUs to many OEM and Flashed ECU’s for street bikes with analogue 0-5v input.

The GP ASG Superbike sensor greatly improves the gear change performance and reliability compared to OEM and other competitors. It gives a superior distinct and smooth gear change performance similar to top GP and WSBK systems.

Compared to OEM and other shifters the Cordona ASG Superbike is faster, more distinct and have smoother action. The bike will use less traction control and not upset chassis under gear changes as much, especially during lean angle.

Description: D.I.D ER Series Exclusive 520 ERV7 Racing Chain 120 Link
520ERV7120ZB

-Premium Road Racing Chain
-Features gold color plates
-Tensile strength: 8,800 lbs.

Description: DYMAG UP7X FORGED ALUMINUM FRONT HONDA CBR-1000RR

Front Dymag Aluminum UP7X Front Wheel comes in one size
17 x 3.5"

-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.

Description: Evol Technology Has Been used in Dominance over the past few years in Moto America and Now they are growing popularity with Teams in Europe.

Kallio Racing in World SuperSport are using Evol Products on their R6 Team Bikes As well as Many Top Moto America Teams

Evol Technology do their R&D on the Track and by Top level racers and Teams Like Team H35 Benny Solis Jr, Roadrace factory Jake Gagne, 2017 Daytona200 Winning Team TOBC with Danny Eslick, Superstock Champions Westby Racing with Mathew Sholtz and Latus Racing Bobby Fong to name a few

They come in a Magnesium clear finish or a Anodized Black.

These can take up to 4 weeks to Deliver as inventory goes fast! Just like the Bikes you will find them on!

Description: Extreme Components Carbon AIR BOX HOSE FOR HONDA CBR600RR (2013/2020)

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Rear mudguard for Honda CBR1000RR (2017/2019) - CH15020

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Rear mudguard for Honda CBR600RR (2007/2020) - CH12020

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Swingarm protection for Honda CBR600RR (2007/2020) - CH12055

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Clutch control racing with GP EVO lever offset 29 mm - CFC29N This does not have a clutch switch so would need drilled and tapped if required for your model
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: The Chrome Pro 2 comes in a package containing:
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.

Description: MIVV Slip-on MK3 Carbon Exhaust For HONDA CBR 1000 RR 2017 - 2019 H.070.SM3C

Description: MIVV Slip-on MK3 Stainless Steel Exhaust For HONDA CBR 1000 RR 2017 - 2019 H.070.SM3X

Description: MIVV Slip-on MK3 Stainless Steel Exhaust For HONDA CBR 1000 RR 2017 - 2019 H.071.SM3X

Description: MWR Air Filter for Honda CBR500R, CB500X, & CB500F (2013+) MC-030-15

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended

Description: MWR Performance, HE, & Race Filters For Honda CBR1000RR (2017+) MC-030-17 MC-030-17-HE MC-030-17-R

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended

Description: MWR Racing WSBK Air Filter for the Honda CBR1000RR (2017+) MC-030-17/WSBK

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended

Description: Qnium Radial Rear Thumb Brake Master Cylinder 12mm

The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.

Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.

Made in The Netherlands

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Includes Sprocket Carrier and Cush Drive Rubbers

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.

Description: Samco Sport 11 Piece OEM Replacement Silicone Radiator Coolant Hose Kit Honda CBR 1000 RR Fireblade / SP / SP2 2012 - 2019 HON-110

SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue and red.

Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.

Description: Samco Sport 4 Piece Silicone Radiator Coolant Hose Kit Honda CB 500 F/ CB 500 X/ CBR 500 R HON-89

SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue and red.

Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.

Description: Samco Sport 6 Piece Y-Piece Race Design Silicone Radiator Coolant Hose Kit Honda CBR 1000 RR Fireblade / SP / SP2 2012 - 2019 HON-82

SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black and red.

Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.

Description: Samco Sport 7 Piece Silicone Radiator Coolant Hose Kit Honda CBR 600 RR PC40 2007 - 2020 HON-34

SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue and red.

Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.

Description: Sprint Filter P08 CBR1000RR (17-19) 405556