Note: (Springs Sold Separately Use Springs Series 08790-) NIX 30 Cartridge Kit FGK 226 Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Supers...
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 226
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 226
Type Code
30mm Cartridge Kit R&T
Technical data
Length:
117 mm
Stroke:
120 mm
Position:
front
Spring series:
08790-Serie
Notes
For Showa Front Forks.
Springs are not part of the kit and have to be ordered seperately. It is recommended to contact an authorised ÖHLINS Service Center for installation.
TTX 25 Cartridge Kit (FKR 100) FKR 109 The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers i...
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 109
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series:
04744-Serie
Packaging included:
springs 9.0, 9.5, 10.0
Notes
Fits models with Öhlins fork FL 910 and FL 926.
Comes with 3 different spring rates: 9.5 ,10 & 10.5 N/mm.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
TTX 25 Cartridge Kit (FKR 100) FKR 110 The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers i...
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 110
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series:
04744-Serie
Packaging included:
springs 9.0, 9.5, 10.0
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
TTX 25 Cartridge Kit (FKR 100) FKR 116 The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers i...
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 116
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series:
04744-Serie
Packaging included:
springs 9.5, 10.0, 10.5 N/mm
Notes
Fits models with Showa OEM fork. It is recommended to contact an authorized ÖHLINS Service Center for installation.
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,299.00
Ohlins FKS 225 NIX 22 Cartridge KitNew
NIX 22 Cartridge Kit FKS 225 Öhlins cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of perf...
Öhlins cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of performance together with stable damping characteristics while ensuring great comfort and contributing to rider confidence. With the NIX22 cartridge kits this now available for motorcycles with conventional front forks.
Each Öhlins cartridge kit has been tested extensively and tailor made to suit the individual requirements and characteristics for each individual bike. In combination with the well proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg, it allows for a more precise function and stability. All adjustments including spring preload are made at the top cap.
The cartridge system fits into the original front fork, springs have to be ordered individually - please follow our recommendations regarding spring rates in relation to rider's weight.
Part number
FKS 225
Type Code
NIX 22
Technical data
Stroke:
120 mm
Position:
front
Spring series:
08429-Serie
Recommended oil:
01309-01
Oil level mm:
150 mm
Packaging unit:
pair
Notes
Springs are not included in the kit and have to be ordered individually.
It is recommended to contact an ÖHLINS Service Center for installation.
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $679.00
Öhlins NIX 30 Cartridge Kit FGK 222New
Öhlins NIX 30 Cartridge Kit FGK 222 The Öhlins NIX 30 front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if ...
The Öhlins NIX 30 front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The Öhlins cartridge kit has a unique design with compression damping and the adjustment on the left leg and rebound damping and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload! The cartridge kit system fits bolt on in most standard hyper sport front forks.
The Öhlins cartridge system fits into the original front fork, springs have to be ordered individually. Please follow our recommendations regarding spring rates and oil in relation to rider's weight and preference listed in the specific cartridge kit's mounting instruction.
Part number
FGK 222
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke:
120 mm
Position:
front
Spring series:
08790-Serie
Notes
For models with and without ABS.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
If no inventory is listed above, please expect 1-to-12-week ETA from the manufacturer. Feel free to contact us if you have any questions.
Price: $1,229.00
ROTOBOX BOOST Front HONDA CBR 1000 RR 2017New
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and ma...
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350354
Condition: New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
ROTOBOX BOOST Front HONDA CBR 1000RR 08+New
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and ma...
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350303
Condition: New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
ROTOBOX BOOST Front HONDA CBR 600RR 07+New
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and ma...
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350304
Condition: New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
ROTOBOX BOOST Rear HONDA CBR 1000 RR 2017New
Rotobox BOOST Symmetric Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in glo...
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600758
Condition: New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,410.00
ROTOBOX BOOST Rear HONDA CBR 1000RR 04+New
Rotobox BOOST Symmetric Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in glo...
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600703
Condition: New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,410.00
ROTOBOX BOOST Rear HONDA CBR 600RR 07+New
Rotobox BOOST Symmetric Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in glo...
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600704
Condition: New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,410.00
Ohlins FGRT 204 Upside Down Front Fork Road & TrackNew
FGRT Upside Down Front Fork Road & Track FGRT 204 It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The...
It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The new Road & Track front fork will give you loads of performance, stable damping and fantastic comfort. The new Road & Track front fork features the Öhlins 30 mm Cartridge Kit inside, a winning kit in several national superbike championships.
Compression and rebound adjustments are easily done with compression adjustment in one leg and rebound
adjustment in the other leg. The new front fork gives a big improvement in tire feel, brake support and the general handling of the bike. The outer design has been redesigned to make this front fork even more attractive.
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,699.00
Ohlins HO 611 STX 36 ScooterNew
Based on the well proven and high performing STX 36 shocks Öhlins has developed both mono shocks and twin shocks to enchance the performance and comfort of scooters. The application list includes ...
Description:
Based on the well proven and high performing STX 36 shocks Öhlins has developed both mono shocks and twin shocks to enchance the performance and comfort of scooters. The application list includes shock absorber upgrades for 125 up to 600 cc scooters.
The STX 36 is a classic monotube design available in emulsion, piggyback or hose versions depending on application and it can also be specified with a number of different damping adjustment options with or without length adjustment.
Item #: HO 611
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $699.00
Ohlins HO 363 TTX GP shock absorbersNew
End of 2017, Öhlins released an updated version of the well-proven TTX GP motorcycle shock absorber. Most of the model range has been replaced by the new version. There are still some of the pr...
End of 2017, Öhlins released an updated version of the well-proven TTX GP motorcycle shock absorber. Most of the model range has been replaced by the new version.
There are still some of the pre-2018 shock absorbers in stock and Öhlins DTC starts selling these out with a reduced SRP.
The following pre-2018 products are currently available at a reduced price:
Some of these items are not in stock at ÖDTC. Therefore the delivery may take up to 2 weeks. <span style="font-size: 14px;">The campaign is valid as long as stock lasts. After being sold out, these items cannot be ordered any more.</span>
Item #: HO 363
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,469.00
Ohlins HO 468 TTX GP Shock AbsorberNew
TTX GP Shock Absorber HO 468 Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performan...
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.
We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!
Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
HO 468
Type Code
T36PR1C1LB
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
L
Adjustable length.
B
Integrated hydraulic spring preload adjuster. Adjuster wheel or hexagon on the adjuster.
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,499.00
Ohlins HO 469 TTX GP Shock AbsorberNew
TTX GP Shock Absorber HO 469 Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performan...
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.
We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!
Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
HO 469
Type Code
T36PR1C1LS
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,499.00
Ohlins HO 704 Street S46 ShockNew
COST OF SPRINGS INCLUDED IN PRICE
The STX46 Street Performance Line is based on our popular STX46 DR1 shock absorber and developed for naked sports bikes and street performance bikes. It featu...
The STX46 Street Performance Line is based on our popular STX46 DR1 shock absorber and developed for naked sports bikes and street performance bikes. It features a large 46mm main piston and an internal gas reservoir within the main body of the shock.
With adjustable damping you can change the behavior of the shock to suit your taste and even fit a hydraulic spring pre loader to change the stance of the bike. This is the perfect choice for the naked sports bike, or as well call it: Street Performance Line.
Item #: HO 704
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Ohlins HO 709 STX 36 SupersportNew
The ride to the track should be just as enjoyable as the race itself. You need to feel confident, comfortable, and ready to take on your best race yet. With Öhlins STX 36 Supersport shock absorber...
Description:
The ride to the track should be just as enjoyable as the race itself. You need to feel confident, comfortable, and ready to take on your best race yet. With Öhlins STX 36 Supersport shock absorbers you will experience the track day feeling no matter if you’re on or off the track.
Our STX 36 Supersport is available in the classic inline, piggyback, and hose remote reservoir, making it possible for you to ride with excellence no matter what bike you have. Every turn and every corner becomes smooth and reliable with our unique and reliable STX technology.
Let your passion shine through as you get out on the road and get ready to experience a whole new way of racing.
Item #: HO 709
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $999.00
Ohlins HO 717 STX 36 SupersportNew
The ride to the track should be just as enjoyable as the race itself. You need to feel confident, comfortable, and ready to take on your best race yet. With Öhlins STX 36 Supersport shock absorber...
Description:
The ride to the track should be just as enjoyable as the race itself. You need to feel confident, comfortable, and ready to take on your best race yet. With Öhlins STX 36 Supersport shock absorbers you will experience the track day feeling no matter if you’re on or off the track.
Our STX 36 Supersport is available in the classic inline, piggyback, and hose remote reservoir, making it possible for you to ride with excellence no matter what bike you have. Every turn and every corner becomes smooth and reliable with our unique and reliable STX technology.
Let your passion shine through as you get out on the road and get ready to experience a whole new way of racing.
Item #: HO 717
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $849.00
Ohlins HO 821 STX 46 Supersport Shock AbsorberNew
STX 46 Supersport Shock Absorber HO 821 Part number HO 821 Type Code S46HR1C1L S Single tube 46 Piston diameter: 46 mm H Monotube high pressure gas t...
Rotobox BOOST Convex Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss ...
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 2.93 kg / 6.45 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: CA70600772
Condition: New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,837.00
ROTOBOX RBX2 Front HONDA CBR 1000 RR 2017New
Rotobox RBX2 Front Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, ...
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350154
Condition: New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,922.00
ROTOBOX RBX2 Front HONDA CBR 1000RR 08+New
Rotobox RBX2 Front Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, ...
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350103
Condition: New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,922.00
ROTOBOX RBX2 Rear HONDA CBR 1000RR 04+New
Rotobox RBX2 Symmetric Rear Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium all...
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: RA70600503
Condition: New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $3,410.00
ROTOBOX RBX2 Rear HONDA CBR 600RR 07+New
Rotobox RBX2 Symmetric Rear Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium all...
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: RA70600504
Condition: New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Honda CBR600RR (2005 - 2019) - w/ Tokiko Calipers
Honda CBR600RRA (2009 - 2019) - ABS w/ Tokiko Calipers
Honda CBR1000RR (2004 - 2016) - w/ Tokiko Calipers
Honda CBR1000RRA (2008 - 2016) - ABS w/ Tokiko Calipers
Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
Item #: VD-170XX
Condition: New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Description:
• Upper Race Fairing (4 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs)
• Fuel Tank Cover (Oem; 4 Dzus]
Additional parts needed
Part needed to fit complete race fairing:
• aluminium inserts for seat unit (4 pcs)
*To Fit Seat Pan Brackets are Required
Item #: H18100AF
Condition: New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Parts Included In Complete Race Fairing:
Upper Race Fairing (4 Dzus)
Lower Fairing (4 Dzus)
Left Side Panel
Right Side Panel
Single Race Seat (2 Pcs)
Fuel Tank Cover (Oem; 4 Dzus]
Optional...
Description:
Parts Included In Complete Race Fairing:
Upper Race Fairing (4 Dzus)
Lower Fairing (4 Dzus)
Left Side Panel
Right Side Panel
Single Race Seat (2 Pcs)
Fuel Tank Cover (Oem; 4 Dzus]
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CH18100
Condition: New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,369.63
Carbonin Shark Fin Carbon Fiber for Suter swing armNew
Carbonin Shark Fin AKA toe guard Carbon Fiber 17-20 Honda CBR1000RR using a suter swingarm
-Plain weave carbon Fiber construction
May fit other swingarms
Description:
Carbonin Shark Fin AKA toe guard Carbon Fiber 17-20 Honda CBR1000RR using a suter swingarm
-Plain weave carbon Fiber construction
May fit other swingarms
Item #: CH18061
Condition: New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $89.25
Sale: $49.00
Save: 45%
Save: $40.25
Accossato Mirror Covers in CNC-worked AluminiumNew
Accossato Mirror Covers, in CNC-worked Aluminium and anodyzed in many colours MC004N
Accossato Mirror Covers, CNC-worked and anodyzed aluminium - many colours available. Sold in pairs, Compatib...
Description:
Accossato Mirror Covers, in CNC-worked Aluminium and anodyzed in many colours MC004N
Accossato Mirror Covers, CNC-worked and anodyzed aluminium - many colours available. Sold in pairs, Compatible with specific motorcycle applications.
Item #: MC004N
Condition: New
Limited Supply: Only 1 Left!
Price: $29.74
Sale: $25.00
Save: 16%
Save: $4.74
AiM SOLO DL Honda CBR 600/1000 RR ECU interface harness*New
AiM SOLO DL Honda CBR 600/1000 RR ECU interface harness*
DATA LOGGER CABLE
Description:
AiM SOLO DL Honda CBR 600/1000 RR ECU interface harness*
DATA LOGGER CABLE
Item #: V02569320
Condition: New
Aim Supply has been severely affected due to material shortages and most products are currently on a 3 month delivery date. Please send us an email request to find out ETAs.
Price: $73.00
Akrapovic Racing LIne Ti/Stainless System Honda CBR1000RR / SP/ SP2 2017-2019New
The racing line uses a stainless steel Header with a titanium muffler
Description:
Replace YTZ & YTX Models
The lithium ATZ-10-RS is a direct replacement for these OEM battery sizes:
YTZ10S
YTZ12
YTZ14
YTX9
YTX7A-BS
YT12A-BS
Item #: 213041
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are
possible.
Price: $224.99
Antigravity ATZ7 RE-START BatteryNew
The NEW Antigravity ATZ-7-RS is a hi-power lightweight Lithium-Ion battery, built with our groundbreaking RESTART Technology (built-in jump-starting) so you won’t ever get stranded with a dead ba...
Description:
The NEW Antigravity ATZ-7-RS is a hi-power lightweight Lithium-Ion battery, built with our groundbreaking RESTART Technology (built-in jump-starting) so you won’t ever get stranded with a dead battery again! Directly replaces the OEM YTZ7S, YTZ5 and others. 90% of off-road bikes use this size as well as some street bikes.
Item #: 213040
Condition: New
Limited Supply: Only 2 Left!
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $144.99
APX Racing ROAD & TRACK HANDLEBAR SWITCH SET HONDA GROMNew
APEX RACING DEVELOPMENT ROAD & TRACK HANDLEBAR SWITCH SET FOR HONDA GROM
RTHSSFHG
ROAD & TRACK HANDLEBAR SWITCH SET FOR HONDA GROM - This Plug & play switch set is a direct replacemen...
Description:
APEX RACING DEVELOPMENT ROAD & TRACK HANDLEBAR SWITCH SET FOR HONDA GROM
RTHSSFHG
ROAD & TRACK HANDLEBAR SWITCH SET FOR HONDA GROM - This Plug & play switch set is a direct replacement for OEM handlebar switch es for Honda Grom motorcycles (all years) - Unparalleled weight and space savings. Only 100 grams combined weight. Compare to over 300 grams for OEM. Our billet switches take considerably less room on the handlebars and are crash resistant. All street functions are covered:
Left Switch - horn, turn signals, high beam, low beam
Right Switch- Engine Run/Stop, Starter
Completely plug and play. Clutch and brake light wiring included. - Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering. - Comes Plug and play with OEM connectors. - Designed for 22 mm standard clip on handle bars. - Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Item #: RTHSSFHG
Condition: New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $540.00
APX Racing TWO BUTTON ROAD & TRACK KILL SWITCH HONDA GROMNew
APEX RACING DEVELOPMENT TWO BUTTON ROAD & TRACK KILL SWITCH FOR HONDA GROM
HGR2
TWO BUTTON ROAD & TRACK KILL SWITCH FOR HONDA GROM Part # HGR2 - The switch is a direct plug and play replac...
Description:
APEX RACING DEVELOPMENT TWO BUTTON ROAD & TRACK KILL SWITCH FOR HONDA GROM
HGR2
TWO BUTTON ROAD & TRACK KILL SWITCH FOR HONDA GROM Part # HGR2 - The switch is a direct plug and play replacement for OEM right handlebar switch for Honda Grom motorcycles (all years) - Unparalleled weight and space savings. Only 40 grams. Compare to over 100grm for OEM. Switch functions: Engine Run/Stop, Starter (brake light cabling included)
Completely plug and play. - Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering. - Comes Plug and play with OEM connectors. - Designed for 22 mm standard clip on handle bars. - Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Item #: HGR2
Condition: New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Description:
Armour Bodies Honda CBR600RR 2013-2019 Pro Series SuperBike Kit w/Tank Cover 71-0349SB
Item #: 71-0349SB
Condition: New
Price: $1,174.99
ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , BLACKNew
ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , BLACK (REPLACEMENT PARTS) 216110BE MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing,...
Description:
ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , BLACK (REPLACEMENT PARTS) 216110BE MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 216110B
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $548.50
ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , BLACK (REPLACEMENT PARTS)New
ATTACK PERFORMANCE REAR SET KIT, TRIUMPH 675 06- , AERO HARD 709110G MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, an...
Description:
ATTACK PERFORMANCE REAR SET KIT, TRIUMPH 675 06- , AERO HARD 709110G MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 216110BE
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/ SHIFT LEVER, BLACKNew
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/ SHIFT LEVER, BLACK 218110B MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manu...
Description:
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/ SHIFT LEVER, BLACK 218110B MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 218110B
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $548.50
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/ SHIFT LEVER, BLACK (REPLACEMENT PARTS)New
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/ SHIFT LEVER, BLACK (REPLACEMENT PARTS) 218110BE MADE IN USA
At Attack Performance they have set up many championship winning chassis along...
Description:
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/ SHIFT LEVER, BLACK (REPLACEMENT PARTS) 218110BE MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 218110BE
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/SHIFT LEVER, AERO HARDNew
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/SHIFT LEVER, AERO HARD 218110G MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, ...
Description:
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/SHIFT LEVER, AERO HARD 218110G MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 218110G
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $548.50
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/SHIFT LEVER, AERO HARD (REPLACEMENT PARTS)New
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/SHIFT LEVER, AERO HARD (REPLACEMENT PARTS) 218110GE MADE IN USA
At Attack Performance they have set up many championship winning chassis al...
Description:
ATTACK PERFORMANCE REAR SET KIT, HON CBR1000RR 08- , W/SHIFT LEVER, AERO HARD (REPLACEMENT PARTS) 218110GE MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 218110GE
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , AERO HARDNew
ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , AERO HARD 216110G MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, an...
Description:
ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , AERO HARD 216110G MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 216110G
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $548.50
ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , AERO HARD (REPLACEMENT PARTS)New
ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , AERO HARD (REPLACEMENT PARTS) 216110GE MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designi...
Description:
ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , AERO HARD (REPLACEMENT PARTS) 216110GE MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 216110GE
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
ATTACK PERFORMANCE TRIPLE CLAMP KIT, CBR1000RR 08- , BLACK 218102B MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and ...
Description:
ATTACK PERFORMANCE TRIPLE CLAMP KIT, CBR1000RR 08- , BLACK 218102B MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 218102B
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
ATTACK PERFORMANCE TRIPLE CLAMP KIT, CBR1000RR 08- , BLACK (REPLACEMENT PARTS) 218102BE MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing...
Description:
ATTACK PERFORMANCE TRIPLE CLAMP KIT, CBR1000RR 08- , BLACK (REPLACEMENT PARTS) 218102BE MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 218102BE
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, CBR1000RR 08- 218112 MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and build...
Description:
ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, CBR1000RR 08- 218112 MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 218112
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, CBR1000RR 08- (REPLACEMENT PARTS) 218112E MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, man...
Description:
ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, CBR1000RR 08- (REPLACEMENT PARTS) 218112E MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 218112E
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, CBR1000RR 08-BLACK 218112B MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and...
Description:
ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, CBR1000RR 08-BLACK 218112B MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 218112B
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, CBR1000RR 08-BLACK (REPLACEMENT PARTS) 218112BE MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designin...
Description:
ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, CBR1000RR 08-BLACK (REPLACEMENT PARTS) 218112BE MADE IN USA
At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 218112BE
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Barnett Honda Grom Clutch Spring Kit for StreetNew
Barnett Honda Grom Clutch Spring Kit for Street
This spring kit fits the Honda Grom 2014-2020
Description:
Bonamici Racing Aluminium Brake Lever Honda CBR 600 RR (2007/>), CBR 1000 (2008/>) LB150
Item #: LB150
Condition: New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $160.44
Bonamici Racing Aluminium BRAKE LEVERS WITH REMOTE ADJUSTER HondaCBR 600 RRNewItem #: RALB150RBonamici Racing
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $127.47
Bonamici Racing Aluminium HondaCBR 600 RRBRAKE LEVERS WITH REMOTE ADJUSTERNewItem #: RALB150Bonamici Racing
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $279.12
Bonamici Racing Aluminium Rearsets Honda CBR 1000 RR Fireblade 2017-2019New
Bonamici Racing Aluminium Rearsets Honda CBR 1000 RR Fireblade 2017-2019 H013
Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black...
Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure compatibility, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment, after this their parts are fine tuned, tested and validated through various levels of Motorsport meaning you can have complete confidence in these Rearsets to transform your Honda CBR!
These Rearsets allow you to decide where you would like the footpegs to be mounted, featuring multiple different mounting positions you can rest assured that these Rearsets will improve the handling, comfort and appearance of your Fireblade!
Item #: H013
Condition: New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Bonamici Racing Aluminium Rearsets Honda CBR 1000 RR Fireblade SP/SP 2 2017-2019 H014
Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with...
Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure compatibility, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment, after this their parts are fine tuned, tested and validated through various levels of Motorsport meaning you can have complete confidence in these Rearsets to transform your Honda CBR!
These Rearsets allow you to decide where you would like the footpegs to be mounted, featuring multiple different mounting positions you can rest assured that these Rearsets will improve the handling, comfort and appearance of your Fireblade SP/SP2!
Item #: H014
Condition: New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
