HHR Performance » 2015, Suzuki, GSX-R 750

Products for:

  • (X) Year: 2015
  • (X) Make: Suzuki
  • (X) Model: GSX-R 750

View Universal items for: 2015, Suzuki, GSX-R 750


Browse Products

Sort
View
 
Items 1-56 of 56
Description: Rotobox BOOST Symmetric Rear Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.00"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 280 kg / 617 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600713
Condition: New
Price: $2,195.00
Sale: $1,975.50
Save: 10%
Save: $219.50


Description: Rotobox BOOST Front Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 180 kg / 400 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350310
Condition: New
Price: $1,545.00
Sale: $1,390.50
Save: 10%
Save: $154.50


Description: Rotobox BOOST Symmetric Rear Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.00"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 280 kg / 617 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600708
Condition: New
Price: $2,195.00
Sale: $1,975.50
Save: 10%
Save: $219.50


Description: Rotobox RBX2 Front Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 150 kg / 330 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350110
Condition: New
Price: $1,545.00
Sale: $1,390.50
Save: 10%
Save: $154.50


Description: Rotobox RBX2 Symmetric Rear Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.0"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 250 kg / 550 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: RA70600513
Condition: New
Price: $1,945.00
Sale: $1,750.50
Save: 10%
Save: $194.50


Description: Gsxr600/750 front fender for racing
Item #: S10010AF
Condition: New
Limited Supply: Only 1 Left!
Price: $107.95

Qty:

Price: $119.99

Qty:

Description: Quick Info
For Solo DL Kit
Suzuki GSX-R
Cable Only
Product Details
Suzuki GSX-R SOLODL Cable Only
Item #: V02569140
Condition: New
Price: $65.00

Qty:

Description: Quick Info
Solo Bracket
For Suzuki
GSX-R
Product Details
Aim Solo Bracket for Suzuki GSX-R. The bracket can be used with Solo and the SoloDL.
Item #: X46KSSGSXR
Condition: New
Price: $32.00
Qty:

Description: Replace YTZ & YTX Models
The lithium ATZ-10-RS is a direct replacement for these OEM battery sizes:

YTZ10S
YTZ12
YTZ14

YTX9
YTX7A-BS
YT12A-BS
Item #: 213041
Condition: New
Price: $199.99

Qty:

Description:
w/Shift Lever Suzuki GSXR-600/750 11-17



Located in Southern California, Attack Performance has long sponsored national level pro racing, winning three AMA Pro Racing Championships*, two Daytona 200 races back-to-back, plus the WSMC Toyota 200 five years in a row!

AP rear sets exhibit the best practices in engineering, validated by professionals under the most extreme race conditions. At Attack, they don't do things becuase it's cool. There's no guess work. Every aspect of their rearset is done to better the balance between functionality, weight savings, rigidity, and overall use through extensive computational modeling and real world testing.

If you're looking for race oriented, "heavily sprited" canyon carving, or just a big upgrade to your rearsets look no further than attack performance.

Check out all the important features and advances in the Details tab "below".
Item #: 422110
Condition: New
Price: $469.98
Sale: $422.97
Save: 10%
Save: $47.01


Price: $209.98

Qty:

Price: $279.97

Qty:

Price: $439.96

Qty:

Description:
THIS PRICE IS ONLY FOR ONE SIDE/DISC


320mm x 6.75mm brake disc
Single disc
Find Brembo Racing Disc, 320x6.75mm, Pistabassa, Single Rotor, Suzuki, Black Carrier
and other parts you need at hhrperformance.com - HHR Performance, Sandpoint, Idaho
Item #: 08C86933
Condition: New
Price: $675.00

Qty:

Description:
Floating, Black Carrier, Suzuki


Derived from the experience gained in SBK and MotoGP, the brand new T-Drive disc is the natural technical evolution of latest generation Brembo competition brake discs. The special shape of the 8 “T” pins on the disc and the eight shapes on the braking torque dragging system housing are the innovative element which strongly differentiates the new T-Drive from discs with cylindrical bushing systems. In fact, as a result of specific studies into process and machining tolerances, this unique configuration transfers braking torque more effectively, providing improved resistance to thermo-mechanical stress, especially in extreme conditions of use such as racing.
The connection between housing and rotor is ensured by a special guillotine hooking system (patent pending) which allows both radial and axial floating and reduces the overall weight of the disc, resulting in a significant advantage in terms of rideability compared to the traditional bushing system. Both performance consistency and the efficiency of disc and brake pads coupling during the running-in period have been significantly improved thanks to a rotor - in steel identical to that used for the discs in SBK and MotoGP - characterised by a new differentiated diameter hole pattern. The rotor height has also been optimised: maintaining a thickness of 5.5 mm, the height could be reduced to the advantage of containing weight and the moment of inertia with the consequential benefit of improved vehicle handling.
The housing is black anthracite anodised like latest generation racing discs. The Brembo logo is on the housing, machined from billet and painted in an unmistakeable red, yet another distinctive sign that characterises the racing image. All of the Brembo “T-Drive” discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The T-drive discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Item #: 208A98533
Condition: New
Price: $699.00

Qty:

Description: Replacement lower fairing
Item #: S11220AF
Condition: New
Price: $248.92

Qty:

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (4 Dzus)
• Lower Fairing
• Single Race Seat (4 Pcs)

There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: S11100AF
Condition: New
Price: $892.81


Description: Replacement Tail unit and seat pan
Item #: S11300AF
Condition: New
Limited Supply: Only 1 Left!
Price: $251.46


Description: Replacement upper fairing with Dzus
Item #: S11210AF
Condition: New
Price: $414.02

Qty:

Description: Carbon fiber airbox inlet tubes
Item #: CS11070
Condition: New
Limited Supply: Only 1 Left!
Price: $266.70

Qty:

Description: Carbon fiber Alternator cover installed with Silicon
Item #: CS7030
Condition: New
Price: $127.00

Qty:

Description: Carbon fiber clutch cover installed with Bolts (not Supplied)
Item #: CS9040
Condition: New
Price: $170.18

Qty:

Description: Whether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:

Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.

These are light-weight and do not interfere with any OEM bodywork.

These also look great and give your bike a great appearance
Item #: CS11050
Condition: New
Limited Supply: Only 1 Left!
Price: $266.70

Qty:

Description: Whether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:

Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.

These are light-weight and do not interfere with any OEM bodywork.

These also look great and give your bike a great appearance
Item #: CS11055
Condition: New
Limited Supply: Only 1 Left!
Price: $209.55

Qty:

Description: Lightweight Carbon fender OEM Replacement
Item #: CS10010
Condition: New
Limited Supply: Only 4 Left!
Price: $194.31

Qty:

Description: GSXR600/750 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1160S
Condition: New
Price: $309.88

Qty:

Description: Carbon fiber rear fender OEM replacement
Item #: CS11020
Condition: New
Price: $165.10

Qty:

Description: GSXR600/750 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1150S
Condition: New
Price: $227.33

Qty:

Description: The 520ERV7 is an upgrade that will replace the 520ERV3. The 520ERV7 is an upgrade that will replace the 520ERV3. Quite a bit of a jump from 3-7
It has been over a decade since the 520ERV3 was introduced, so the 520ERV7 will see significant upgrades, including stronger inner plates, resulting in a 3% higher tensile strength, and a greater chain life, which is increased by 13% due to material upgrades with our patented X-Ring seal. The ERV7 will be slightly heavier than the ERV3 at 3.41 lbs per 100 links.
Item #: 520ERV7120ZB
Condition: New
Limited Supply: Only 1 Left!
Price: $248.99

Qty:

Description: DID 520ERV7 Gold Chain 124 Link

The 520ERV7 is an upgrade that will replace the 520ERV3. The 520ERV7 is an upgrade that will replace the 520ERV3. Quite a bit of a jump from 3-7
It has been over a decade since the 520ERV3 was introduced, so the 520ERV7 will see significant upgrades, including stronger inner plates, resulting in a 3% higher tensile strength, and a greater chain life, which is increased by 13% due to material upgrades with our patented X-Ring seal. The ERV7 will be slightly heavier than the ERV3 at 3.41 lbs per 100 links.
Item #: 520ERV7124ZB
Condition: New
Price: $256.95

Qty:

Description: The 520ERV7 is an upgrade that will replace the 520ERV3. The 520ERV7 is an upgrade that will replace the 520ERV3. Quite a bit of a jump from 3-7
It has been over a decade since the 520ERV3 was introduced, so the 520ERV7 will see significant upgrades, including stronger inner plates, resulting in a 3% higher tensile strength, and a greater chain life, which is increased by 13% due to material upgrades with our patented X-Ring seal. The ERV7 will be slightly heavier than the ERV3 at 3.41 lbs per 100 links.
Item #: 520ERV7130ZB
Condition: New
Price: $246.99

Qty:

Price: $79.99

Qty:

Price: $53.99

Qty:

Price: $53.99

Qty:

Description: These are the rearsets chosen by riders and racers such as 10 time OMRRA Overall Champion Alan Schmidt and AFM lap record holder Lenny Hale. Developed over thousands of track and street miles, they are beautiful yet durable and functional, and are adjustable to suit most rider sizes and riding styles. Their appearance is strikingly mean yet beautiful ? providing an honestly unique alternative to anything else on the market for your bike.
Item #: ETR-SRA-096.1
Condition: New
Price: $569.00

Qty:

Description:
Suzuki GSX-R1000, GSX-R600/750



Evol Technology Replacement Heelguard Left for Suzuki GSX-R1000, GSX-R600/750

Description Not Available Now

Find Evol Technology's ET-HG-L.SUZ Evol Technology Replacement Heelguard Left for Suzuki GSX-R1000, GSX-R600/750 and other parts you need at hhrperformance.com - HHR Performance, Sandpoint, Idaho
Item #: ET-HG-L.SUZ
Condition: New
Price: $35.00
Qty:

Evol Technology - Evol Technology Replacement Heelguard Right
No Image Available
Description:
Suzuki GSX-R1000, GSX-R600/750



Evol Technology Replacement Heelguard Right for Suzuki GSX-R1000, GSX-R600/750

Description Not Available Now

Find Evol Technology's ET-HG-R.SUZ Evol Technology Replacement Heelguard Right for Suzuki GSX-R1000, GSX-R600/750 and other parts you need at hhrperformance.com - HHR Performance, Sandpoint, Idaho
Item #: ET-HG-R.SUZ
Condition: New
Price: $35.00
Qty:

Description: Evol Technology Tangent Tube Clipons 50mm
-Made In USA
-Available in colors Black or Hard Magnesium

These exciting new clip ons offer a unique take on hand control design. They feature a clip on tube that threads into the clamp, allowing for a more central mounting position, which translates to better feel, control and ergonomics. The bars are secured by a locking tab with the option of using safety wire as well. These clip ons also allow removal/installation without removal of the top triple clamp, thanks to a pivoting clamp design. These clip ons are the choices of many professional teams, such as Roadrace Factory and Westby Racing. We are proud to us Evol Technology clip ons on our team race bikes.
Item #: ETP-COA-50.1
Condition: New
Price: $225.00


Description:
 
Graves Motorsports Sport Bike Rear Brake Return Spring

Simple solution to the problem of the rear brake dragging. This billet aluminum spring plate and spring install easily onto the motorcycle rear brake master cylinder rod and keeps the brake pedal pushed out when not in use. A simple and effecitive option for fixing motorcycle brake drag.

Fits the following:
  • Suzuki GSX-R 600 + 750 + 1000 : 1996 to present with stock or aftermarket rearsets
  • Yamaha R1 + R6 : All years with stock or aftermarket rearsets
  • Note: These return springs also fit other motorcycle models (see image to determine if your bike uses the same style rear master cylinder as shown).
Item #: BK039
Condition: New
Price: $19.95
Qty:

Price: $224.99

Qty:

Description: Whether heading for a National Roadracing title or just taking your bike to the local race track, the cartridge kit offers loads of performance, stability and superior suppleness. This kit has a unique design, where the compression damping is taken care of the left fork leg while the other controls rebound damping. This allows not only for a more precise function and better stability, but also the possibility of having all adjustments conveniently placed at the top of the fork, together with the spring preload adjusters. The cartridge kit fits bolt on and is easy to install in most standard hypersport front forks. Note! This kit is delivered without springs. The 08790-series of front fork springs are available to order separately to suit the rider’s choice of spring rate.
Item #: FGK 217
Condition: New
Price: $1,300.00


Description: COST OF SPRINGS INCLUDED IN PRICE

Based on the highly regarded TTX technology it has been developed from Öhlins’ vast experience in MotoGP. Compared with the standard TTX36 MkII, the compression and rebound adjustments have improved even further with a new adjustment needle, providing better guidance and a different flow restriction behavior. The function of the damper is more consistent with less variation and the adjusters work in a more precise manner. A new main piston completes the package, designed to improve traction and rider control. Did we mention that the weight is reduced even further? Among the advantages are a much improved chassis feedback as well as enhanced performance. Also, the adjustment range is even wider and with this new design, the variation in behavior from one shock absorber to another is further reduced – a proof of Öhlins commitment to precision. The TTX GP continues on the TTX36 path, sharing and improving on the benefits of one of the best shock absorbers in the world. TTX GP will be available for most major bikes used in national racing as well as the new street bike models.
Item #: SU 469
Condition: New
Price: $1,375.00


Description: Pre Drilled for Safety wire for the use of securing your brake caliper bolts. which is a requirement for racing organisations
These are Titanium saving weight over oem and stainless steel
Black Titanium: Long lasting finish resulting from an application of Diamond Like Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating.
Item #: MTIFBMON190BLK
Condition: New
Price: $100.57

Qty:

Description: Pre Drilled for Safety wire for the use of securing your brake caliper bolts. which is a requirement for racing organisations
These are Titanium saving weight over oem and stainless steel
Item #: MTIFBMON190
Condition: New
Price: $91.29

Qty:

NEW!
Description: Titanium Brake rotor bolts set
Item #: TI15DISCSUZ20
Condition: New
Price: $135.29

Qty:

NEW!
Description: Titanium Brake rotor bolts
Item #: TI5DISCSUZ20
Condition: New
Price: $45.10
Qty:

NEW!
Description: *NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Item #: F70350B310
Condition: New
Price: $1,695.00


Description: QUICK ACTION FUEL CAP Suzuki GSXR SV Hayabusa
Item #: SPSUZUKI02
Condition: New
Limited Supply: Only 1 Left!
Available in Black Only
Price: $108.00

Qty:

Description: SUTER SLIPPER CLUTCH
Item #: 004-14004
Condition: New
Price: $995.00

Qty:

Description: Will fit the model years 11'18
Our Tig Welded 8602 Aluminum Accessory for the Suzuki GSXR 600/750 weighs in at pounds.
Item #: SUZ6001BRA
Condition: New
Price: $30.00
Qty:

Description: Will fit the model years 11'18
The TighTails subframe for the Suzuki GSXR 600/750offers an extra rigid seating platform while only tipping the scales at 2.8 pounds.
Our use of 6082 Aluminum as well as heavy duty TIG welds make the extra strong/lightweight subframe possible.
Any Supersport or Superbike tail section will mount up without modifications as long as the tail section attaches to the subframe from the top.
Available in Brushed Aluminum.
Item #: SUZ6001SUB
Condition: New
Price: $410.00

Qty:

Description: Will fit the model years 11'18
Our TIG welded 8602 Aluminum Upperstay for the Suzuki GSXR 600/750 weighs in at 0.74 pounds.
Available in Brushed Aluminum.
Item #: SUZ6001UPP
Condition: New
Price: $135.00

Qty:

Description: XLine kit tank wrap
Item #: 62-3007-XL
Condition: New
Price: $89.95

Qty:

Description: Vesrah is considered one of the top racing brake pads manufactures.

Honda CBR600RR ( 2007 - Present )
Honda CBR1000RR ( 2007 - Present )

Suzuki GSX-R600 ( 2011 - Present )
Suzuki GSX-R600 ( 2011 - Present )
Suzuki GSX-R1000 ( 2009 - Present )

Kawasaki ZX-6R ( 2013 - Present )
Kawasaki ZX-6R ABS ( 2013 - Present )
Kawasaki ZX-10R ( 2011 - Present )
Kawasaki ZX-10R ABS ( 2011 - Present )

Yamaha YZF-R1 ( 2015 - Present )
Yamaha YZF-R6 ( 2017 - Present )


The JL Brake Pad compound is the recommended choice for the rear brake where more control and feel is required. The JL compound has less power than the Racing RJL/SRJL brake pads to provide more feel..
Pad compound is resistant to fade related to heat buildup.
No Bedding in of the pad is required before usage
JL Compound is recommended for the Kawasaki 250 Ninja
Item #: VD-174JL
Condition: New
Limited Supply: Only 3 Left!
Price: $33.00
Qty:

Description: GSXR600/750 seat for Carbonin bodywork

Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1110S
Condition: New
Limited Supply: Only 2 Left!
Price: $112.59

Qty:

Items 1-56 of 56

View Universal items for: 2015, Suzuki, GSX-R 750