- Home »
- Catalog
HHR Performance » 2010, CBR-1000RR
Products for:
- Year: 2010
- Model: CBR-1000RR
View Universal items for: 2010 CBR-1000RR
Browse Products
- Page 1 of 2
- Next
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 203
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 203
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke: | 122 mm |
---|---|
Position: | front |
Spring series: | 08790-Serie |
Notes
For models with and without ABS. It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Honda CBR1000RR (2008 – 2011)
- Teilegutachten (Germany)
- "ABE" in preparation (Germany)
- For both models with and without ABS.
Download
- Mounting Instructions FGK 203 English (1.295,6 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 203 German (1.317,3 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
TTX RT Shock Absorber HO 358
Cavitation. Something you don’t want in your shock absorber. It’s devastating because basically it means the damping is lost. Small bubbles in the oil can never create the necessary damping forces. Traditional dampers working in extreme conditions sometimes suffers from low pressure on the piston backside.
The TTX was created by Öhlins engineers to eliminate the risk for cavitation. They succeeded. With the TTX technology a positive pressure balance is created in the shock which means the risk for cavitation is gone.
TTX stands for Twin Tube with the X illustrating how the flow through the valves in the cylinder head is designed. Thanks to the twin tube technology the pressure usually created on top of the piston is transferred through the cylinder head and the adjusters for compression and rebound, then flows through the space between the inner and outer tube to the other side of the solid piston.
These equals to a pressure balance within the shock. The outer reservoir is only used to take care of the oil displacement from the piston rod and heat expansion, which is why it can be fairly small in design. Inside the reservoir there is a dividing piston between the oil and the nitrogen gas.
Part number
HO 358
Type Code
T36PR1C1L
![Twin tube Twin tube](https://www.ohlins.eu/images/icon-ttx.png)
T
Twin tube
![Piston diameter Piston diameter](https://www.ohlins.eu/images/icon-diameter.png)
36
Piston diameter: 36 mm
![type P type P](https://www.ohlins.eu/images/db/thumbs/img-00000278.jpg)
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
![TTX36 R1 rebound damping adjuster TTX36 R1 rebound damping adjuster](https://www.ohlins.eu/images/db/thumbs/img-00000312.jpg)
![TTX_GP R1 rebound damping adjuster TTX_GP R1 rebound damping adjuster](https://www.ohlins.eu/images/db/thumbs/img-00000311.jpg)
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
![TTX36 C1 compression damping adjuster TTX36 C1 compression damping adjuster](https://www.ohlins.eu/images/db/thumbs/img-00000322.jpg)
![TTX GP C1 compression damping adjuster TTX GP C1 compression damping adjuster](https://www.ohlins.eu/images/db/thumbs/img-00000323.jpg)
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
![L L](https://www.ohlins.eu/images/db/thumbs/img-00000275.jpg)
L
Adjustable length.
Technical data
Length: | 302 +4/-2 mm |
---|---|
Stroke: | 60 mm |
Rate N/mm: | 105 N/mm |
Position: | rear |
Mounted spring: | 21040-36 |
Packaging unit: | pieces |
Fits for vehicles
Honda CBR1000RR (2008 – 2016)
- ABE (Germany)
Download
- Mounting Instruction HO 358 English (289,4 KB)
- Owner´s Manual TTX RT shock absorber Road & Track English (1.862,6 KB)
- Mounting Instruction HO 358 German (657,2 KB)
- Owner´s Manual TTX RT shock absorber Road & Track German (3.409,9 KB)
TTX GP Shock Absorber HO 466
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.
We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!
Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
HO 466
Type Code
T36PR1C1LS
![Twin tube Twin tube](https://www.ohlins.eu/images/icon-ttx.png)
T
Twin tube
![Piston diameter Piston diameter](https://www.ohlins.eu/images/icon-diameter.png)
36
Piston diameter: 36 mm
![type P type P](https://www.ohlins.eu/images/db/thumbs/img-00000278.jpg)
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
![TTX36 R1 rebound damping adjuster TTX36 R1 rebound damping adjuster](https://www.ohlins.eu/images/db/thumbs/img-00000312.jpg)
![TTX_GP R1 rebound damping adjuster TTX_GP R1 rebound damping adjuster](https://www.ohlins.eu/images/db/thumbs/img-00000311.jpg)
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
![TTX36 C1 compression damping adjuster TTX36 C1 compression damping adjuster](https://www.ohlins.eu/images/db/thumbs/img-00000322.jpg)
![TTX GP C1 compression damping adjuster TTX GP C1 compression damping adjuster](https://www.ohlins.eu/images/db/thumbs/img-00000323.jpg)
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
![L L](https://www.ohlins.eu/images/db/thumbs/img-00000275.jpg)
L
Adjustable length.
![S S](https://www.ohlins.eu/images/db/thumbs/img-00000273.jpg)
S
Hose mounted hydraulic spring preload adjuster.
Technical data
Length: | 302 +4/-2 mm |
---|---|
Stroke: | 60 mm |
Rate N/mm: | 105 N/mm |
Position: | rear |
Mounted spring: | 21040-36 |
Packaging unit: | pieces |
Fits for vehicles
Honda CBR1000RR (2008 – 2016)
- ABE (Germany)
Download
- Mounting Instructions HO 466 English (350,5 KB)
- Owner´s Manual TTX RT shock absorber Road & Track English (1.862,6 KB)
- Mounting Instructions HO 466 German (338,0 KB)
- Owner´s Manual TTX RT shock absorber Road & Track German (3.409,9 KB)
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 2.93 kg / 6.45 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
*Sold per caliper
Honda CBR600RR (2005 - 2019) - w/ Tokiko Calipers
Honda CBR600RRA (2009 - 2019) - ABS w/ Tokiko Calipers
Honda CBR1000RR (2004 - 2016) - w/ Tokiko Calipers
Honda CBR1000RRA (2008 - 2016) - ABS w/ Tokiko Calipers
Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
Accossato Mirror Covers, CNC-worked and anodyzed aluminium - many colours available. Sold in pairs, Compatible with specific motorcycle applications.
DATA LOGGER CABLE
The lithium ATZ-10-RS is a direct replacement for these OEM battery sizes:
YTZ10S
YTZ12
YTZ14
YTX9
YTX7A-BS
YT12A-BS
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
These racing rearsets are manufactured in Italy and are superb quality, and will fit the CBR1000RR (2008-2016) - RACE VERSION.
They are CNC machined from billet aluminium billet and powder coated black. Other colours are available (gold, silver, red and blue) but it takes around 1 month for them to be manufactured and coated, so please contact us and we can arrange to get some made for you. Please note that these are for racing use and therefore do not operate the brake light. It is not possible to mount the Bonamici Racing hydrostop. Bonamici Racing rearsets use bearings to completely eliminate the friction on the levers, and a spring for the assisted return of the rear brake lever. You can adjust the footpeg in many different positions.
Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure compatibility, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment, after this their parts are fine tuned, tested and validated through various levels of Motorsport meaning you can have complete confidence in these Rearsets to transform your Honda CBR! These Rearsets allow you to decide where you would like the footpegs to be mounted, featuring multiple different mounting positions you can rest assured that these Rearsets will improve the handling, comfort and appearance of your CBR1000RR!
Bonamici Racing is an Italian manufacturer of CNC machined performance parts such as rearsets, engine covers, chain adjusters, triple clamps, dashboard covers, clip-ons, levers, chain protectors, etc. Bonamici Racing is supplier to numerous teams in e.g. the World Superbikes (WSBK) and Endurance World Campionship (EWC). Everything is made in Italy.
This Fuel Cap has been designed by Bonamici to directly replace the OEM Fuel Cap component on the Honda CBR 1000RR, allowing you to have faster fueling times, drastically helping in something like a pit lane environment. This Fuel Tank Cap kit is perfect for either a Trackday Warrior or even your Fair Weather Rider! Manufactured from Billet Aluminium and treated to an anodized surface finish, you can rest assured that this Fuel Tank Cap Kit will withstand the harshest of conditions while looking amazing at the same time!
Honda CBR1000 2008-2016
320mm x 6.75mm brake disc
Single disc
Find Brembo Racing Disc, 320x6.75mm, Pistabassa, Single Rotor, Honda CBR1000 2008-2016, Black Carrier
and other parts you need at hhrperformance.com - HHR Performance, Sandpoint, Idaho
Mechanical Clutch Lever Kit, Honda
Billet aluminium alloy mechanical lever.
The billet machining, which uses sophisticated numerically controlled equipment, provides maximum lightweight values thanks to optimum machining tolerances and a higher general product quality, both intrinsically and aesthetically.
This lever is designed for riders with a radial brake master cylinder and mechanical clutch installed. Beyond the aesthetic reasons, this lever guarantees perfect sliding on the rotation pin.
• HRC Upper Fainng (8 Dzus)
• Hrc Lower Fairing
• Hrc Single Race Seat
• Hrc Fuel Tank Cover
Part needed to fit complete HRC fairing:
• HRC aluminium sub-frame
Options
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
• Upper Race Fairing
• Lower Fairing (6 Dzus)
• Single Race Seat
• Fuel Tank Cover (Oem)
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
*Made to fit OEM Fork setup
Pictures are shown for reference only and may not accurately represent the exact model of your seat
The installation of this item requires the additional items below.
Aluminum (ALU13004H)
You will not be able to install this item without item(s). They are Carbonin innovations and can not be purchased anywhere else or replaced with other products on the market.
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Strain Gauge ASG Quickshifter (Analog)
Up shift and downshift analogue signal, for advanced ECU’s that can blip the throttle at downshifts, such as Marelli, Motec, MotoGP and WSBK ECUs.
HRC connector for Plug and Play use with HRC ECU and wiring harness
Item 425Special, Analogue high sensitive GP ASG Superbike quickshifter/blip sensor for Honda CBR1000RR SP1/SP2 (SC77) with std. or kit HRC ECU from 2017- Replace OEM QS for up and downshift.
Configurable for push or pull linkage (street or race shift).
Completely plug and play mounted with Pinbolts and 150 mm aluminum rod and uniballs included.
The new developed GP ASG Superbike sensor is a direct plug & play OEM replacement quickshifter/blipper (or only quickshifter) for modern Superbikes and Streetbikes with an analogue 0-5v interface to the ECU.
The GP ASG Superbike sensor greatly improves the gear change performance and gives a superior distinct and smooth gear change feeling similar to top GP and WSBK systems.
The Strain Gauge technology is far more reliable than spring loaded OEM shifters and is fully weather protected.
The GP ASG Superbike is easily configurable for push or pull gear linkage (street or race gear shift).
- Page 1 of 2
- Next