Description: Rotobox BOOST Front Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 180 kg / 400 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!

Description: APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) APRD-TBERSFART

Description: APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) (BREMBO MOUNT INLINE)
TBERSFA-RSV4-BMI


- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.

Description: Bonamici Racing Aluminium Handlebars Diameter 51 mm lifted SM51

Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.

Description: Bonamici Racing Aluminium Rearsets Aprilia RSV4 - Tuono V4 2009/2016 A003

Description: Aluminum lever kit Aprilia RSV4, Factory, APRC, Tuono 1100, RS 660, Tuono 660 KL010

Description: Bonamici Racing Glass Spare Part Aprilia RSV4 | Tuono V4 SP_DCP06

Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.

Description: Replacement Right Side Panel

Description: Carbon Fiber Clutch Cover Installed With Silicon (Not Supplied)

Description: Whether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:

Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.

These are light-weight and do not interfere with any OEM bodywork.

These also look great and give your bike a great appearance

Description: Cordona GP SG Switch Quickshifter, Aprilia RSV4 With PEG Sensor Quickshifter 409PEG
This will not work with your oem blipper. For blipper to work you must order 421spec

Description: DYMAG UP7X FORGED ALUMINUM FRONT WHEEL 2009-2018 APRILIA RSV4 1000
Front Dymag Aluminum UP7X Front Wheel comes in one size
17 x 3.5" (standard/OEM)

-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.

Description: Extreme Components Brake side monolithic plate for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020) - PED-GP EVO MON DX RSV4

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Engine protector for Aprilia RSV4 RF (2009/2020) - clutch - CLUTCH RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Gear side monolithic plate for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2021) - PED-GP EVO MON SX RSV4

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (standard shifting) with carbon fiber heel guard (silver) - PED-GP EVO RSV416 B LCD RSV4 S
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (standard shifting) with aluminium heel guard (black) - PED-GP EVO RSV416 LCD RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: MWR High Efficiency & Racing Air Filter for the Aprilia RSV4 (09-14) MC-010-09-HE MC-010-09-R MC-010-09

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Includes Sprocket Carrier and Cush Drive Rubbers

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.

Description: Samco Sport 5 Piece Thermostat Bypass Silicone Radiator Coolant Hose KitAprilia RSV4 / RF / RR 2009 - 2021 APR-11

SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black and red.

Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.