HHR Performance » 2009, Aprilia, RSV 1000/R/FACTORY

Products for:

  • (X) Year: 2009
  • (X) Make: Aprilia
  • (X) Model: RSV 1000/R/FACTORY

View Universal items for: 2009, Aprilia, RSV 1000/R/FACTORY


Browse Products

Sort
View
 
Items 1-26 of 26
Description: Rotobox BOOST Symmetric Rear Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.00"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 280 kg / 617 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600714
Condition: New
FREE SHIPPING! Factory Pre Order Only for all Rotobox wheels with up to an 8 Week ETA for production. Please feel free to call us for ETA if no inventory is listed above.
Free Ground Shipping
Price: $2,195.00


Description: COST OF SPRINGS INCLUDED IN PRICE

The Öhlins STX 46 shock absorber comes in a wide range of styles and for many different bikes in the smaller Hyper Sport segment, such as the Yamaha R3, Ninja 250 Honda CBR 250. This shock absorber features the Öhlins well-known Monotube design with its builds quality. With fully adjustable compression and rebound damping it has a great range of adjustments possible. And if you would like to have it, you can fit the shock absorber with an optional hydraulic spring preloader! The Öhlins STX 46 shock absorber brings a new way to ride your bike. With enhanced cornering performance and improved comfort it contributes to rider confidence which makes you want to go faster around the track. But the STX 46 does also work well for your daily commute and the weekend country road tour.
Item #: AP 351
Condition: New
Please feel free to call us for ETA if no inventory is listed above.
Price: $1,150.00


Description: Rotobox RBX2 Front Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 150 kg / 330 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350111
Condition: New
FREE SHIPPING! Factory Pre Order Only for all Rotobox wheels with up to an 8 Week ETA for production. Please feel free to call us for ETA if no inventory is listed above.
Free Ground Shipping
Price: $2,730.00


Description: Rotobox RBX2 Symmetric Rear Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.0"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 250 kg / 550 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: RA70600514
Condition: New
FREE SHIPPING! Factory Pre Order Only for all Rotobox wheels with up to an 8 Week ETA for production. Please feel free to call us for ETA if no inventory is listed above.
Free Ground Shipping
Price: $3,180.00


Description: Vesrah Brake Pads VD-9031 RJL
-Fits Brembo M4 & M50 Calipers
-The RJL Brake Pad compound is the perfect choice for Aggressive Street Riders, Track Day Riding and Novice Racers.
Item #: VD-9031RJL
Condition: New
Delivery times for Vesrah products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $148.00

Qty:

Description: Pair of clip-ons provided with metal clamp 2 half rings provided 10° inclination. The 2 half-rings system enables to easily replace the clip-ons without desmantling the fork. The bracelets are available in black and silver - many sizes available. They are made in Aluminumforged.
Item #: CP003
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $210.10


Description: Lifted clip-on 10° or 20° mm inclination 10° inclination. Sono disponibili per forcelle di diameter 50 mm e hanno un rialzo + 10 o + 20 mm to make your racing experience more comfortable. The bracelets can be black or silver colour. They are made in CNC-worked Aluminum.
Item #: CP004
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $288.20


Description: Accossato fixed clutch lever Made in CNC-worked alluminium. Available options: short and long. Anodyzed in 7 different colours. Compatible with applications of specific motorcycles.
Item #: ESV004
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $84.70


Description: Accossato Fork Preload Steering Nut Made in CNC-worked Aluminum and anodyzed. Available in 7 different colours. The internal hexagon is 22 mm. The ring is Compatible with applications of specific motorcycles and can fit all the nuts - they are the same size.
Item #: AD022
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $34.10

Description: Adjustable clip-ons with 6Degree to 10Degree inclination forniti with internal ring. The system is designed to adapt the clip-ons to different diamters of forks by easily replacing the internal bronze bearing provided - choosing from differenz sizes. They are made in CNC-worked Aluminum.
Item #: CP001
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $349.80


Description: Cables for Accossato Throttle controls - specific for motorcycles: Aprilia Tuono 1000 R-Factory (2006 - 2009). The cables are Compatible for Accossato Throttle control (from code MY001 to MY009)
Item #: AP006
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $106.70

Qty:

Description: Extreme Components Brake lever for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020) - PED-GP EVO LFR RSV4

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LFR RSV4
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $119.00


Description: Extreme Components Brake side monolithic plate for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020) - PED-GP EVO MON DX RSV4

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO MON DX RSV4
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $150.00

Qty:

Description: Extreme Components Exhaust support plate for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2016) - UPSC RSV4 16

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: UPSC RSV4 16
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $44.00
Qty:

Description: Extreme Components Gear Shift lever for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020)(reverse shifting) - PED-GP EVO LCR RSV4

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LCR RSV4
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $79.00

Qty:

Description: Extreme Components Gear Shift lever for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020)(standard shifting) - PED-GP EVO LCD RSV4

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LCD RSV4
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $79.00

Qty:

Description: Extreme Components Gear side monolithic plate for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2021) - PED-GP EVO MON SX RSV4

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO MON SX RSV4
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $150.00

Qty:

Description: Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (reverse shifting) with carbon fiber heel guard (silver) - PED-GP EVO RSV416 B LCR RSV4 S
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 B LCR RSV4 S
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $556.00

Qty:

Description: Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (standard shifting) with carbon fiber heel guard (black) - PED-GP EVO RSV416 C LCD RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 C LCD RSV4 B
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $556.00

Qty:

Description: Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (standard shifting) with carbon fiber heel guard (silver) - PED-GP EVO RSV416 B LCD RSV4 S
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 B LCD RSV4 S
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $556.00

Qty:

Description: Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (reverse shifting) with aluminium heel guard (black) - PED-GP EVO RSV416 LCR RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 LCR RSV4 B
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $519.00

Qty:

Description: Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (reverse shifting) with carbon fiber heel guard (black) - PED-GP EVO RSV416 C LCR RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 C LCR RSV4 B
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $556.00

Qty:

Description: Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (standard shifting) with aluminium heel guard (black) - PED-GP EVO RSV416 LCD RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 LCD RSV4 B
Condition: New
Delivery times for Extreme Components can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
ETA is approximately 4-5 weeks.
Price: $519.00

Qty:

Description: *NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Item #: F70350B311
Condition: New
FREE SHIPPING! Factory Pre Order Only for all Rotobox wheels with up to an 8 Week ETA for production. Please feel free to call us for ETA if no inventory is listed above.
Free Ground Shipping
Price: $1,695.00


Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Includes Sprocket Carrier and Cush Drive Rubbers

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
Item #: R70600B714
Condition: New
FREE SHIPPING! Factory Pre Order Only for all Rotobox wheels with up to an 8 Week ETA for production. Please feel free to call us for ETA if no inventory is listed above.
Free Ground Shipping
Price: $2,295.00


Description: Suter Racing Suterclutch Aprilia RSV 1000 / TUONO 1000 004-37003

• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
Item #: 004-37003
Condition: New
Delivery times for Suter products can vary from 2-3 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $1,050.00
Sale: $945.00
Save: 10%
Save: $105.00


Items 1-26 of 26

View Universal items for: 2009, Aprilia, RSV 1000/R/FACTORY