HHR Performance » Ducati, Panigale V4

Description: Extreme Components Rear mudguard OEM for Ducati Panigale V4 / V4S / V4R e Streetfighter V4/ V4S (2018/2020) - DUC-V4060

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Swingarm protection for Ducati Panigale V4 / V4S / V4R and Streetfighter V4/ V4S (2018/2020) (glossy transparent) - DUC-V4040

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Tank protection for Ducati Panigale V4 / V4S / V4R and Streetfighter V4/ V4S (2018/2020) (glossy transparent) - DUC-V4070

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Tank protection for Ducati Panigale V4 / V4S / V4R and Streetfighter V4/ V4S (2018/2020) (matte transparent) - DUC-V4110

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP Handlebars 15mm offset with steering damper support - Diameter 53mm for Ducati Panigale V4 / S / R (2018/2020) - SEMI GP V4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Engine protector in aluminium fully whole billet with 3d machining - alternator for Ducati Panigale V4 / V4S / V4R and Streetfighter V4/ V4S (2018/2020) - ALTER PANV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for Ducati PANIGALE V4R (2019/2020) - CLUTCH PANV4R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Engine protectors in aluminum fully whole billet with 3d machining 2 PIECE for Ducati PANIGALE V4R (2019/2023) (clutch + alternator) - PROT-ENG PANV4R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Engine protectors in aluminium fully whole billet with 3d machining 2 PIECE for Ducati Panigale V4 / V4S / V4R and Streetfighter V4/ V4S (2018/2020) (clutch + alternator) - PROT-ENG PANV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Gear side monolithic plate for Ducati Panigale V4 / V4S / V4R (2018/2020) - PED-GP EVO MON SX V4

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Gear side spacer for Ducati Panigale V4 / V4S / V4R (2018/2020) - PED-GP EVO ARRSX V4

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO rear sets kit for Ducati Panigale V4 / V4S / V4R e Streetfighter V4/ V4S (2018/2020) (standard and reverse shifting) with aluminium heel guard (black) - PED-GP EVO PANIGALE V4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO rear sets kit for Ducati Panigale V4 / V4S / V4R e Streetfighter V4/ V4S (2018/2020) (standard and reverse shifting) with carbon fiber heel guard (black) - PED-GP EVO PANIGALE V4C
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: For racing purposes this is a fuel tank cover with a built in extension, the cover changes the shape to provide better support for the rider in hard braking.

Description: RACING BODYWORK/ GAS TANK COVER FOR DUCATI PANIGALE V4 / S / R 2018-2021 (2022 and higher needs part LD1415) -Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Colorless racing windscreen high protection for Ducati Panigale V4R (2019/2023) (HP) - PPANV419 High Profile Race screen
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Colorless racing windscreen high protection for Ducati Panigale V4S (2020) (HP) - PPANV4S20 HP
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Made from Kevlar these Brake lines are Ultra Lightweight.
Designed to Fit the Ducati V4 S/R this is a complete ABS delete kit consisting of Front and Rear Lines With Banjo Bolts
If you are using a different Caliper or Master cylinder from oem please specify in checkout notes so we can order with correct fittings and banjo threads
*often this item is made to order due to color options so please allow up to 4 weeks for delivery.

Description: The Chrome Pro 2 comes in a package containing:
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.

Description: Only works on PANIGALE V4 R (998 cc) - 2023 and newer
Requires Button switch JP PLD 120R to be used Sold Separate

Description: Racing left handlebar switch for Ducati Panigale V4/S/R (Titanium).
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.

Description: Right handlebar switch for Ducati Panigale V4/S (Standard master cylinder)(Ducati).
WARNING: product compatible only with the standard master cyclinder or
Fits
Ducati
SUPERBIKE PANIGALE V4/S (1100 cc) - 2018/2020
SUPERBIKE PANIGALE V4/S (1100 cc) - 2021/2023

Description: Street version left handlebar switch for Ducati Panigale V4/S/R.
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.

ATTENTION: heated grips function not available.
SUPERBIKE PANIGALE V4 R (998 cc) - 2019/2020
SUPERBIKE PANIGALE V4 R (998 cc) - 2023
SUPERBIKE PANIGALE V4/S (1100 cc) - 2018/2020
SUPERBIKE PANIGALE V4/S (1100 cc) - 2021/2023

Description: MIVV Full System Titanium Exhaust For DUCATI STREETFIGHTER V4 | PANIGALE V4 2018 - 2022 R.DU.0006.SM3C

Description: Made for Racing Only

Description: MWR Racing WSBK Air Filter for the Ducati Panigale / Streetfighter V4 / S / R / Speciale MC-020-18/WSBK

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended

Description: Thanks to the superior pressurized design and extremely tight manufacturing tolerances, the steering damper delivers supreme performance and agility, and with the wide adjustment range it is easy to find that perfectly weighted steering feel and feedback. Available as a bolt-on kit for most sport and hypersport models, there is also an assortment of universal models in different lengths and a wide range of mounting brackets and parts for race bikes as well as custom builders.

Description: Qnium Radial Rear Left Hand Brake Master Cylinder 12mm

Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.

These high quality brake levers can be placed both above and below the lever of the clutch.

Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.

Made in Netherlands

Description: Qnium Radial Rear Thumb Brake Master Cylinder 12mm

The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.

Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.

Made in The Netherlands

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.

Description: *NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

Description: Sprint Filter P08 F1-85 Ducati Panigale V4/S/Speciale (18-19)
Reinforced polyurethane frame to aid installation
Single layer waterproof polyester
P08 F1-85 material currently used in MotoGP and WSBK
Highest existing permeability of any air filter on the market
Innovative polyester material allows for consistent airflow
Steel wire mesh with epoxy varnish finish
Patented PTFE (Teflon™) treatment creates a waterproof barrier
Optimized filter surface area provides more airflow, more power and more filtration
Increased air permeability and filtration efficiency when compared to cotton air filters
Airflow: 15,000 l/m2/sec. / Filtration: 85?m
Can be cleaned using only compressed air
Dry filter, no oil treatments required
Direct OEM replacement
1 year warranty

Description: Stealth Ducati Panigale V4 S/SP/SP2 1100 (2018-22) / V2 955 (2020-22) BSS040 From racing experience and aeronautical inspiration comes the Rizoma Stealth Mirror. Specifically designed for sport bikes. It consists of a fixed part, which fits directly to the fairing, and a movable part, which acts as a mirror glass holder. Thanks to a rotating system the two parts get aligned so in the closed position the mirror becomes an aerodynamic foil Wing! Made of billet aluminum, it has a convex glass surface to provide a wider viewing angle and is available in three different anodized colors. Flip it up to ride, flip it down when you race or if your parked up at bike night!

Description: Suter Racing Suterclutch Ducati PANIGALE 959 / 1199-1299 / V4 / DIAVEL 004-28011

• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools

Description: Teknofibra Extra Light Thermal Reflective Belly Pan Kit 30"x12"' .8mm Thickness 0121710638

-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.

Description: TIGHTAILS DUCATI V4 | V4S | V4R 18'+ SUBFRAME DUCV4SUB

Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.

Description: TIGHTAILS DUCATI V4 | V4S | V4R 18'+ UPPER FAIRING STAY DUCV4UP

Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.

Description: TK Dischi Freno EVO Brake Rotor w/ Carbon Covers Ducati Panigale V4 V4S V4R 1299 D08E-C

As seen in Moto2, Moto3 and World Superbike! World class level rotors now available for the professional racer or track day junkie!
TK Dischi EVO Ventilated Floating Rotors with Carbon Covers, for Competition use only.
These Carbon covers are used to direct airflow into the pistons of the calipers to help cool the braking temperature. Hard braking tracks can overheat brakes so these have been
designed and tested in the Moto2 championship to reduce the braking temperature
-Sold as a set, Left and Right
-330mm x 5.75mm
-Carbon Covers offer cooling to the brake pistons resulting in better performing brakes in Higher brake temperature demanding tracks.
-ABS / Speed sensor compatible
-Bobbin-less
-Exclusive Carrier Technology
-Hand-crafted from Billet Metal and Carbon fiber
-Better Cooling with angled holes drilled in both directions
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

Description: Translogic Replacement Quickshifter DCS sensor 2018 onwards Ducati Panigale 1299 & V4 TLS-DCS-J3-PAN-V4-ASY

1dn 5up or 1up 5dn road or race pattern

Ducati replacement Quickshifter DCS sensor for Panigale 1299 V4 models 2018 onwards with standard road shift or inverted race shift set-up (includes tie-rod assembly which can be adjusted to suit standard or aftermarket rear sets). (Replaces Ducati Part No 55215482C features 3 way connector)