- Home »
- Catalog
HHR Performance » 2008, Yamaha
Products for:
- Year: 2008
- Make: Yamaha
View Universal items for: 2008 Yamaha
Browse Products
Description:
Extreme Components Frame protection for Yamaha YZF R6 (2008/2020) - CY12050
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: EXT-CY12050
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $324.88
Description:
Extreme Components Swingarm protection for Yamaha YZF R6 (2008/2020) - CY12055
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CY12055
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $282.50
Racing Clutch perch 29mm with bearings and Fold up lever. No clutch switch provisions
Description:
Extreme Components Clutch control racing with GP EVO lever offset 29 mm - CFC29N
This does not have a clutch switch so would need drilled and tapped if required for your model
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CFC29N
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $305.55
Description:
Extreme Components Engine protector for Yamaha R6 (2007/2020) - clutch - CLUTCH R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $129.85
Description:
Extreme Components Engine protectors for Yamaha R6 (2007/2020) - pick up + alternator + clutch - PROT-ENG R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $318.00
Description:
Extreme Components Engine protector for Yamaha R6 (2007/2020) - alternator - ALTER R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $129.85
Description:
Extreme Components Engine protector for Yamaha R6 (2007/2020) - pick up - PICK UP R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PICK UP R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $87.45
Description:
Extreme Components Exhaust support plate for Yamaha R6 (2006/2020) - SUPSC R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: SUPSC R6
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $49.88
Description:
Extreme Components Gear Shift lever for Yamaha R1 (2015/2020) - PED-GP EVO LCA R1
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LCA R1
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $95.81
Description:
Extreme Components Gear Shift lever for Yamaha R6 (2006/2020) - PED-GP EVO LCA R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LCA R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $95.81
Description:
Extreme Components Gear side monolithic plate for Yamaha R6 (2006/2020) - PED-GP EVO MON SX R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO MON SX R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $157.50
Brake Lever Guard Universal
Description:
Extreme Components GP EVO Carbon Fiber Brake Lever Guard CPLEVO
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube
Item #: CPLEVO
Condition:
New
On-hand inventory ships within 24 hours: When
out of stock delivery times can vary from 2 to
6 weeks Please note supply-chain related
delays are possible.
Price: $223.13
Carbon Clutch Lever Guard
Description:
Extreme Components GP EVO Carbon Fiber Clutch Lever Guard FPLEVO
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube
Item #: FPLEVO
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $223.13
Description:
Extreme Components Racing Gear Shift lever support for Yamaha R6 (2006/2020) - PED-GP EVO SUPLC R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO SUPLC R6
Condition:
New
Limited Supply: Only 5 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $82.69
Description:
Extreme Components GP EVO rear sets kit for Yamaha R6 (2006/2020) (standard and reverse shifting) with aluminium heel guard (black) - PED-GP EVO R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $560.25
Description:
Extreme Components GP EVO rear sets kit for Yamaha R6 (2006/2020) (standard and reverse shifting) with carbon fiber heel guard (black) - PED-GP EVO R6C
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO R6C
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $600.75
Description:
Extreme Components GP EVO rear sets kit for Yamaha R6 (2006/2020) (standard and reverse shifting) with carbon fiber heel guard (silver) - PED-GP EVO R6B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO R6B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $600.75
Description:
Flash Tune Quick Shifter Harness addition Yamaha R1 / R6 / Super Tenere : These harnesses allow for plug and play installation of a FlashTune / dynojet quick shifter sensor to be added to your motorcycle that is equipped with an FT Ecu flash tune and has quick shifting activated. Note: The dynojet PC5 push or pull sensor and shift rods are sold seperately.
Item #: FT-QSHA1
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $39.99
Description:
Bench Tuning Kit : Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! See bike fitments for the different types of setups below -Thank you. Scroll down for in-depth kit information.
Fitment:
- Yamaha R1 2007-2008 (BENCH KIT)
- Yamaha R6 2008-2016 (BENCH KIT)
- VMax 2009-2011 (BENCH KIT ONLY)
This Interface allows you to easily adjust the following!
- Remove ECU Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Fuel Injector Proportioning
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- Remove Top Speed Limiter
- ECU Based Quick-shifting
- Speedometer calibrations
- and new features are added regularly.
Bench ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bench Flashing Harness to flash your ECU outside of the bike
- Power Supply for Bench flashing
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT1
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $450.00
Description:
Fitment:
This Interface allows you to easily adjust the following!
Data-Link ECU Flashing Kit Includes:
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
BIKE SIDE Flash Tune Data-Link ECU Flashing Kit : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! See bike fitments for the different types of setups below- Thank you. Scroll down for in-depth kit information.
Fitment:
- Yamaha R1 2007-2008
- Yamaha R6 2006-2007
- Super Tenere 2012-2013 (BIKE SIDE HARNESS ONLY)
This Interface allows you to easily adjust the following!
- Remove ECU Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Fuel Injector Proportioning
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- Remove Top Speed Limiter
- ECU Based Quick-shifting
- Speedometer calibrations
- and new features are added regularly.
Data-Link ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bike-side programming harness to permanently install on your bike
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL1
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $380.00
Description:
Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Select your desired options from the pull down menu. See bike fitments for the different types of setups below. When ordering please include your bike's ECU # in the notes section at checkout to insure the proper setup is sent to you. Thank you. Scroll down for indepth kit information.
Fitment:
This Interface allows you to easily adjust the following!
Data-Link ECU Flashing Kit Includes:
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Fitment:
- Yamaha R6 2008-2016 (BIKE SIDE HARNESS ONLY * see seperate listing for the bench kits for this bike)
This Interface allows you to easily adjust the following!
- Remove ECU Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Fuel Injector Proportioning
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- Remove Top Speed Limiter
- ECU Based Quick-shifting
- Speedometer calibrations
- and new features are added regularly.
Data-Link ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bike-side programming harness to permanently install on your bike
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL3
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $380.00
Limited Supply: Only 1 Left!
If no inventory is listed above, please feel free to contact us for ETA from manufacturer.
Price: $15.96
Yamaha: R1 04-08, R1 15-22, R6 06-2016, R6 17-22, R3 17-19, R6 Mectronik, R7 2022
Description:
The Chrome Pro 2 comes in a package containing:
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.
Item #: CROR211
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $2,820.00
JP KS 003, R6 Kill switch, R1 Kill Switch
Item #: JP KS 003
Condition:
New
Price: $120.00
2004-2008 R1 Rear shock
Item #: 255-008-270-020
Condition:
New
We offer products from K-Tech and these products are shipped from their USA warehouse. Please allow up to 3 days for your order to be built and shipped. If this is not a common product it will be assembled in the UK with a ship time of 1 to 3 weeks depending on
time of year. These times are Not including Holidays
Price: $1,641.75
R6 Upper triple clamp GP
Description:
Upper triple clamp without ignition Barrell For Racing Version
Item #: PSYA206P1S
Condition:
New
Limited Supply: Only 2 Left!
We try to keep a small stock of this product however resupply can take between 2-3 weeks
Price: $279.00
R6 Upper triple clamp
Description:
Upper triple clamp for OEM ignition
Item #: PSYA206S1S
Condition:
New
We try to keep a small stock of this product however resupply can take between 2-3 weeks
Price: $279.00
steering stops for Yamaha R6 2017+
Description:
Turning stops used for track bikes
Item #: LSYA2152
Condition:
New
Limited Supply: Only 1 Left!
We try to keep a small stock of this product however resupply can take between 2-3 weeks
Price: $80.00
Description:
MIVV NO-KAT Pipe Exhaust For YAMAHA YZF 1000 R1 2007 - 2008 UY.027.C1
Item #: UY.027.C1
Condition:
New
Order Processed within 24-48 hours and ships directly from our supplier. Please do not choose express shipping as an option because it will not be shipped Express. All exhausts ship Ground
Price: $234.30
Description:
MIVV Slip-on Double Gun Titanium Exhaust For YAMAHA YZF 600 R6 2006 - 2016 Y.021.LDG
Item #: Y.021.LDG
Condition:
New
Order Processed within 24-48 hours and ships directly from our supplier. Please do not choose express shipping as an option because it will not be shipped Express. All exhausts ship Ground
Price: $397.10
Description:
MIVV Slip-on MK3 Black Stainless Steel Exhaust For YAMAHA YZF 600 R6 2006 - 2016 Y.021.LM3B
Item #: Y.021.LM3B
Condition:
New
Order Processed within 24-48 hours and ships directly from our supplier. Please do not choose express shipping as an option because it will not be shipped Express. All exhausts ship Ground
Price: $325.60
Description:
HHR Favorite
High precision, accurate to +/- 0.6 psi
Precise digital readout to 0.1 psi
Continuous pressure reading, no need to reset when activating bleed valve
Four selectable scales (PSI, BAR, KG-CM2, kPa)
Large easy to read display with back light for low light applications
Billet aluminum trapezoid body
Billet aluminum air chuck provides tight, leak free seal to tire valve and is specially designed for reading air pressure
High flow push button bleeder valve for precise pressure adjustment
15 inch long high pressure hose with dual swivels and Motion Pro design air chuck
Heavy duty anti-shock protective rubber boot on gauge
Battery powered (1000 tests) with battery strength indicator
Auto off to extend the battery life
Batteries included (Qty. 2 AAA size)
Two year limited warranty
High precision, accurate to +/- 0.6 psi
Precise digital readout to 0.1 psi
Continuous pressure reading, no need to reset when activating bleed valve
Four selectable scales (PSI, BAR, KG-CM2, kPa)
Large easy to read display with back light for low light applications
Billet aluminum trapezoid body
Billet aluminum air chuck provides tight, leak free seal to tire valve and is specially designed for reading air pressure
High flow push button bleeder valve for precise pressure adjustment
15 inch long high pressure hose with dual swivels and Motion Pro design air chuck
Heavy duty anti-shock protective rubber boot on gauge
Battery powered (1000 tests) with battery strength indicator
Auto off to extend the battery life
Batteries included (Qty. 2 AAA size)
Two year limited warranty
Item #: 08-0684
Condition:
New
If no inventory is listed above, please feel free to contact us for ETA from manufacturer.
Price: $109.99
Description:
MWR Performance & HE Filter For Yamaha R1 (2007-08) MC-090-07 MC-090-07-HE
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-090-07
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $94.95
Description:
MWR Racing WSBK Air Filter For Yamaha YZF R6 (2008+) MC-090-08/WSBK
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-090-08/WSBK
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $224.95
Description:
MWR Velocity Stacks for the Yamaha YZF R6 2008-2021 MWR-VS-900
Item #: MWR-VS-900
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $950.00
2006-2016 R6 ohlins steering damper and mount kit
Description:
For Yamaha R6 Tank/triple tree mounted damper and bracket
63mm
63mm
Item #: SD 020
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $679.00
Description:
Thanks to the superior pressurized design and extremely tight manufacturing tolerances, the steering damper delivers supreme performance and agility, and with the wide adjustment range it is easy to find that perfectly weighted steering feel and feedback. Available as a bolt-on kit for most sport and hypersport models, there is also an assortment of universal models in different lengths and a wide range of mounting brackets and parts for race bikes as well as custom builders.
Item #: SD 027
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $449.00
Description:
Pre Drilled for Safety wire for the use of securing your brake caliper bolts. which is a requirement for racing organisations
These are Titanium saving weight over oem and stainless steel
These are Titanium saving weight over oem and stainless steel
Item #: MTIFBMON190
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $91.29
Drilled Oil drain Plug
Description:
Titanium Sump Bolt made from aircraft grade titanium 6AL-4V (grade 5) suitable to replace both grade 5 and grade 8 steel bolts. They are fitted with a magnetic steel stud to attract foreign metal particles to help protect your engine.
pre-drill the bolt heads for lock wiring if required for trackdays and racing.
40% Lighter than the original steel bolts and are corrosion resistant.
pre-drill the bolt heads for lock wiring if required for trackdays and racing.
40% Lighter than the original steel bolts and are corrosion resistant.
Item #: TISUMP1412MAGP
Condition:
New
Price: $21.08
Left Hand Brake
Description:
Qnium Radial Rear Left Hand Brake Master Cylinder 12mm
Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.
These high quality brake levers can be placed both above and below the lever of the clutch.
Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.
Made in Netherlands
Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.
These high quality brake levers can be placed both above and below the lever of the clutch.
Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.
Made in Netherlands
Item #: 104602
Condition:
New
On-hand inventory ships within 24 hours. No Returns on Clearance items all sales are final
Price: $742.00
Thumb Brake
Description:
Qnium Radial Rear Thumb Brake Master Cylinder 12mm
The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.
Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.
Made in The Netherlands
The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.
Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.
Made in The Netherlands
Item #: 106977
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. Due to material shortages we have been seeing up to 6 weeks on resupply. We try to keep this product in
stock so grab it while we have it. Orders placed will be allocated
to incomming stock.
Price: $799.00
Description:
*NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Item #: F70350B308
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,934.00
Description:
*NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
Item #: R70600B710
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,617.00
Description:
*NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
Item #: R70600B709
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,617.00
Description:
Samco Sport 11 Piece OEM Replacement Silicone Radiator Coolant Hose Kit Yamaha YZF R6 2006 - 2021 YAM-17
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of hose kits are usually stocked in blue and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of hose kits are usually stocked in blue and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: YAM-17
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to
order with an 6–8-week ETA
Price: $304.95
Description:
Samco Sport 12 Piece Silicone Radiator Coolant Hose Kit Yamaha YZF R1 (Full Hose Kit) 2007 - 2008 YAM-13
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of Hose kits are usually stocked in blue.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of Hose kits are usually stocked in blue.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: YAM-13
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to
order with an 6–8-week ETA
Price: $444.95
Description:
Samco Sport 6 Piece Silicone Radiator Coolant Hose Kit Yamaha YZF R1 (Radiator Hoses Only) 2007 - 2008 YAM-62
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: YAM-62
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to
order with an 6–8-week ETA
Price: $300.95
Description:
Important Installation Note: Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses. We recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike.
Item #: CKYAM-17
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $61.95
Description:
SE Moto Carbon Fiber Radiator Shroud 2006-2019 Yamaha R6 using Prepreg construction methods, formerly known as SE Composites. #MadeInUSA
Item #: SEYR606RS
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $385.00
Description:
Sprint Filter P08 YZF-R1 (07-08) 403468
Item #: 403468
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $99.97
Description:
Sprint Filter P08 YZF-R6 (08-20) 403416
Item #: 403416
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $104.97
Description:
Sprint Filter P08 F1-85 YZF-R6 (08-20)
Reinforced polyurethane frame to aid installation
Single layer waterproof polyester
P08 F1-85 material currently used in MotoGP and WSBK
Highest existing permeability of any air filter on the market
Innovative polyester material allows for consistent airflow
Steel wire mesh with epoxy varnish finish
Patented PTFE (Teflon™) treatment creates a waterproof barrier
Optimized filter surface area provides more airflow, more power and more filtration
Increased air permeability and filtration efficiency when compared to cotton air filters
Airflow: 15,000 l/m2/sec. / Filtration: 85?m
Can be cleaned using only compressed air
Dry filter, no oil treatments required
Direct OEM replacement
1 year warranty
Reinforced polyurethane frame to aid installation
Single layer waterproof polyester
P08 F1-85 material currently used in MotoGP and WSBK
Highest existing permeability of any air filter on the market
Innovative polyester material allows for consistent airflow
Steel wire mesh with epoxy varnish finish
Patented PTFE (Teflon™) treatment creates a waterproof barrier
Optimized filter surface area provides more airflow, more power and more filtration
Increased air permeability and filtration efficiency when compared to cotton air filters
Airflow: 15,000 l/m2/sec. / Filtration: 85?m
Can be cleaned using only compressed air
Dry filter, no oil treatments required
Direct OEM replacement
1 year warranty
Item #: 403559
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $249.00
Description:
Suter Racing Suterclutch Yamaha R6 2006-2020 004-16002
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
Item #: 004-16002
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Please feel free to contact us for any
questions.
Price: $1,050.00
Sale: $945.00
Save: 10%
Save: $105.00
Description:
Techspec GRIPSTER C3 SEAT PAD 2008-2016 YAMAHA R6
C3 is a comfortable gummy rubber. The C3 Grip Material acts more like a "Pad" offering the Ultimate in Comfort and Grip. The durameter of the Rubber has a soft gummy feel allowing your knees to sink into the material, almost like memory foam. Squeeze your tank and feel what solid seat position is and does for you. Will assist in reduction of vibration, increase in control, and increase in comfort.
Universal Seat Pad, Thickness is .375"
C3 is a comfortable gummy rubber. The C3 Grip Material acts more like a "Pad" offering the Ultimate in Comfort and Grip. The durameter of the Rubber has a soft gummy feel allowing your knees to sink into the material, almost like memory foam. Squeeze your tank and feel what solid seat position is and does for you. Will assist in reduction of vibration, increase in control, and increase in comfort.
Universal Seat Pad, Thickness is .375"
Item #: 62-5017-C3
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $79.95
Description:
XLine2 kit tank wrap for YAMAHA R6 (2008 - 2016) XLine2 Tank Grips: Free Center Tank Protector 6 Included
Item #: 62-0075-XL2
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $49.95
Description:
Teknofibra Extra Light Thermal Reflective Belly Pan Kit 30"x12"' .8mm Thickness 0121710638
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
Item #: 0121710638
Condition:
New
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any
questions.
Price: $79.38
Description:
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 400103002
Condition:
New
Limited Supply: Only 9 Left!
On-hand inventory ships within 24 hours,
Price: $173.25
Description:
TIGHTAILS YAMAHA R6 08-16' 1/4 SEAT BRACKET YAMR608SBRKT
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: YAMR608SBRKT
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $66.00
Description:
TIGHTAILS YAMAHA R6 08-16' REAR SUPPORT BRACKET YAMR608BRA
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: YAMR608BRA
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $33.00
Description:
TIGHTAILS YAMAHA R6 08-16' SUBFRAME YAMR608SUB
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: YAMR608SUB
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $473.00