- Home »
- Catalog
HHR Performance » Aprilia
Products for:
- Make: Aprilia
View Universal items for: Aprilia
Browse Products
Description:
MWR Performance Filter For Aprilia RSV4 RR / RF / Factory (2015+) MC-010-15
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-010-15
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $194.95
Description:
MWR Racing WSBK Air Filter for the Aprilia RS 660 MC-010-20/WSBK
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-010-20/WSBK
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $189.95
Description:
MWR Racing WSBK Air Filter for the Aprilia RSV4 RR / RF / Factory (2015+) MC-010-15/WSBK
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-010-15/WSBK
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $224.95
RS 660
Description:
MWR Velocity Stacks for Aprilia RS 660 (2021+) MWR-VS-010
MWR Velocity Stacks 2017-2021 Suzuki GSX-R1000 MWR-VS-700 -power is slighty better then the top-secret Works Stacks from Yoshimura , but also at least 5HP more as the OEM stacks .
MWR Velocity Stacks 2017-2021 Suzuki GSX-R1000 MWR-VS-700 -power is slighty better then the top-secret Works Stacks from Yoshimura , but also at least 5HP more as the OEM stacks .
Item #: MWR-VS-010
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $410.00
If no inventory is listed above, please feel free to contact us for ETA from manufacturer.
Price: $40.00
Left Hand Brake
Description:
Qnium Radial Rear Left Hand Brake Master Cylinder 12mm
Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.
These high quality brake levers can be placed both above and below the lever of the clutch.
Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.
Made in Netherlands
Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.
These high quality brake levers can be placed both above and below the lever of the clutch.
Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.
Made in Netherlands
Item #: 104602
Condition:
New
On-hand inventory ships within 24 hours. No Returns on Clearance items all sales are final
Price: $742.00
Thumb Brake
Description:
Qnium Radial Rear Thumb Brake Master Cylinder 12mm
The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.
Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.
Made in The Netherlands
The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.
Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.
Made in The Netherlands
Item #: 106977
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. Due to material shortages we have been seeing up to 6 weeks on resupply. We try to keep this product in
stock so grab it while we have it. Orders placed will be allocated
to incomming stock.
Price: $799.00
Aprilia RS660 Rapid bike evo
Description:
RapidBike Evo Aprilia RS660
Kit including the Rapid Bike Evo module and the USB cable and model specific wiring harness
All Rapid Bike products are for closed-course competition use only.
EMISSIONS AND NOISE REGULATIONS
CALIFORNIA CUSTOMERS WARNING: You acknowledge and agree that the selected products that you are about to purchase from Rapid Bike USA affecting factory-installed emission equipment are intended FOR RACING USE ONLY, i.e. for use and installation on racing vehicles to be used on closed courses only, and MUST NOT be used on roads or installed on vehicles subject to emission control requirements. You agree NOT to use or install the product(s) on vehicles registered or used on California public roads. By purchasing this product you confirm that you have read and understood this Warning and you agree that you will comply with its requirements. Any use inconsistent with the above will void the manufacturer’s warranty without further notice. Our products are NOT EPA or CARB approved.
Kit including the Rapid Bike Evo module and the USB cable and model specific wiring harness
All Rapid Bike products are for closed-course competition use only.
EMISSIONS AND NOISE REGULATIONS
CALIFORNIA CUSTOMERS WARNING: You acknowledge and agree that the selected products that you are about to purchase from Rapid Bike USA affecting factory-installed emission equipment are intended FOR RACING USE ONLY, i.e. for use and installation on racing vehicles to be used on closed courses only, and MUST NOT be used on roads or installed on vehicles subject to emission control requirements. You agree NOT to use or install the product(s) on vehicles registered or used on California public roads. By purchasing this product you confirm that you have read and understood this Warning and you agree that you will comply with its requirements. Any use inconsistent with the above will void the manufacturer’s warranty without further notice. Our products are NOT EPA or CARB approved.
Item #: F27-ER-152L
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $495.00
RSV4 Carbon wheels
Description:
*NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Item #: F70350B311
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,934.00
Description:
*NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
Item #: R70600B714
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,617.00
Description:
Samco Sport 10 Piece OEM Replacement Silicone Radiator Coolant Hose Kit Aprilia RSV4 / RF / RR 2009 - 2021 APR-6
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black, red and gunmetal grey.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black, red and gunmetal grey.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: APR-6
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $234.95
Description:
Samco Sport 10 Piece Silicone Radiator Coolant Hose Kit Aprilia RSV 1000 R 2004 - 2008 APR-3
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: APR-3
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $320.95
Description:
Samco Sport 2 Piece Oil Cooler Silicone Hose Kit Aprilia RSV 1000 Mille 1998 - 2003 APR-17
Aprilia RSV 1000 Mille 1998 - 2003 2 Piece Samco Sport Oil Cooler Silicone Hose Kit
This is a high performance product which replaces your standard factory rubber hoses to a high quality Samco Sport silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
Hose kits are usually stocked in blue, black and red.
For special order and arriving soon colours, please see Matching Samco Sport stainless steel hose clamp kit also available.
Item #: APR-17
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $37.95
Description:
Samco Sport 2 Piece Oil Cooler Silicone Hose Kit Aprilia RSV4 / RF / RR 2016 - 2021 APR-14
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in black, blue and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in black, blue and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: APR-14
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $78.95
Description:
Samco Sport 2 Piece Oil Cooler Silicone Hose Kit Aprilia RSV4 / RF / RR | V4 1000 Tuono (Oil Cooler Hoses) | V4 1100 Tuono RR / Factory (Oil Cooler Hoses) APR-15
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: APR-15
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $44.95
Description:
Samco Sport 5 Piece Thermostat Bypass Silicone Radiator Coolant Hose KitAprilia RSV4 / RF / RR 2009 - 2021 APR-11
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: APR-11
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $183.95
Description:
Samco Sport 6 Piece Thermostat Bypass Silicone Radiator Coolant Hose Kit Aprilia RSV 1000 R 2004 - 2008 APR-12
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: APR-12
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $448.95
Description:
Samco Sport 8 Piece Silicone Radiator Coolant Hose Kit Aprilia V4 Tuono 1000 2011 - 2015 APR-8
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, red, and black.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, red, and black.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: APR-8
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $307.95
Description:
Sprint Filter P037 2020-21 Aprilia RS 660 406635
-High Performance, High Durability
-Single layer water-resistant polyester
-Perfect for dual sport motorcycles
-Suitable for use in demanding conditions with the presence of mud
-Innovative polyester material allows for consistent airflow
-Steel wire mesh with epoxy varnish finish
-Patented PTFE (Teflon™) treatment creates a water-resistant barrier
-Optimized filter surface area provides more airflow, more power and more filtration
-Increased air permeability and filtration efficiency when compared to cotton air filters
-Airflow: 4,500 l/m2/sec. / Filtration: 37?m
-Can be cleaned using only compressed air
-Dry filter, no oil treatments required
-Direct OEM replacement, OEM Part Number: Aprilia 2B006532
-1 year warranty
-High Performance, High Durability
-Single layer water-resistant polyester
-Perfect for dual sport motorcycles
-Suitable for use in demanding conditions with the presence of mud
-Innovative polyester material allows for consistent airflow
-Steel wire mesh with epoxy varnish finish
-Patented PTFE (Teflon™) treatment creates a water-resistant barrier
-Optimized filter surface area provides more airflow, more power and more filtration
-Increased air permeability and filtration efficiency when compared to cotton air filters
-Airflow: 4,500 l/m2/sec. / Filtration: 37?m
-Can be cleaned using only compressed air
-Dry filter, no oil treatments required
-Direct OEM replacement, OEM Part Number: Aprilia 2B006532
-1 year warranty
Item #: 406635
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $209.97
Description:
Sprint Filter P08 2020-21 Aprilia RS 660 402129
-Made for Street
-Single layer polyester
-P08 material currently used in MotoGP and WSBK
-Innovative polyester material allows for consistent airflow
-Steel wire mesh with epoxy varnish finish
-Optimized filter surface area provides more airflow, more power and more filtration
-Increased air permeability and filtration efficiency when compared to cotton air filters
-Airflow: 5,050 l/m2/sec. / Filtration: 80?m
-Can be cleaned using only compressed air
-Dry filter, no oil treatments required
-Direct OEM replacement, OEM Part Number: Aprilia 2B006532
-1 year warranty
-Made for Street
-Single layer polyester
-P08 material currently used in MotoGP and WSBK
-Innovative polyester material allows for consistent airflow
-Steel wire mesh with epoxy varnish finish
-Optimized filter surface area provides more airflow, more power and more filtration
-Increased air permeability and filtration efficiency when compared to cotton air filters
-Airflow: 5,050 l/m2/sec. / Filtration: 80?m
-Can be cleaned using only compressed air
-Dry filter, no oil treatments required
-Direct OEM replacement, OEM Part Number: Aprilia 2B006532
-1 year warranty
Item #: 402129
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $104.97
Description:
Sprint Filter P08 F1-85 2020 - 2021 Aprilia RS 660 402142
-Made for Racing
-Single layer water-resistant polyester
-P08 F1-85 material currently used in MotoGP and WSBK
-Highest existing permeability of any air filter on the market
-Innovative polyester material allows for consistent airflow
-Steel wire mesh with epoxy varnish finish
-Patented PTFE (Teflon™) treatment creates a water-resistant barrier
-Optimized filter surface area provides more airflow, more power and more filtration
-Increased air permeability and filtration efficiency when compared to cotton air filters
-Airflow: 15,000 l/m2/sec. / Filtration: 85?m
-Can be cleaned using only compressed air
-Dry filter, no oil treatments required
-Direct OEM replacement, OEM Part Number: Aprilia 2B006532
-1 year warranty
-Made for Racing
-Single layer water-resistant polyester
-P08 F1-85 material currently used in MotoGP and WSBK
-Highest existing permeability of any air filter on the market
-Innovative polyester material allows for consistent airflow
-Steel wire mesh with epoxy varnish finish
-Patented PTFE (Teflon™) treatment creates a water-resistant barrier
-Optimized filter surface area provides more airflow, more power and more filtration
-Increased air permeability and filtration efficiency when compared to cotton air filters
-Airflow: 15,000 l/m2/sec. / Filtration: 85?m
-Can be cleaned using only compressed air
-Dry filter, no oil treatments required
-Direct OEM replacement, OEM Part Number: Aprilia 2B006532
-1 year warranty
Item #: 402142
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $249.00
Description:
Sprint Filter P08 F1-85 Aprilia RSV4 RF ABS and RR ABS (15-19)
Reinforced polyurethane frame to aid installation
Single layer waterproof polyester
P08 F1-85 material currently used in MotoGP and WSBK
Highest existing permeability of any air filter on the market
Innovative polyester material allows for consistent airflow
Steel wire mesh with epoxy varnish finish
Patented PTFE (Teflon™) treatment creates a waterproof barrier
Optimized filter surface area provides more airflow, more power and more filtration
Increased air permeability and filtration efficiency when compared to cotton air filters
Airflow: 15,000 l/m2/sec. / Filtration: 85?m
Can be cleaned using only compressed air
Dry filter, no oil treatments required
Direct OEM replacement
1 year warranty
Reinforced polyurethane frame to aid installation
Single layer waterproof polyester
P08 F1-85 material currently used in MotoGP and WSBK
Highest existing permeability of any air filter on the market
Innovative polyester material allows for consistent airflow
Steel wire mesh with epoxy varnish finish
Patented PTFE (Teflon™) treatment creates a waterproof barrier
Optimized filter surface area provides more airflow, more power and more filtration
Increased air permeability and filtration efficiency when compared to cotton air filters
Airflow: 15,000 l/m2/sec. / Filtration: 85?m
Can be cleaned using only compressed air
Dry filter, no oil treatments required
Direct OEM replacement
1 year warranty
Item #: 405400
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $239.95
RSV4 1100 Stealth Mirrors
Description:
Stealth Aprilia RSV4 1100/Factory (2021 - 22) | RS 660 (2020 - 22) BSS070
From racing experience and aeronautical inspiration comes the Rizoma Stealth Mirror. Specifically designed for sport bikes. It consists of a fixed part, which fits directly to the fairing, and a movable part, which acts as a mirror glass holder. Thanks to a rotating system the two parts get aligned so in the closed position the mirror becomes an aerodynamic foil Wing!
Made of billet aluminum, it has a convex glass surface to provide a wider viewing angle and is available in three different anodized colors.
Flip it up to ride, flip it down when you race or if your parked up at bike night!
360 Deg Product Viewer
Item #: BSS070
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $479.00
RS660 Clutch
Description:
Suter Racing Suterclutch Aprilia RS660 004-78001
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
Item #: 004-78001
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $1,050.00
Description:
Suter Racing Suterclutch Aprilia RSV 1000 / TUONO 1000 004-37003
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
Item #: 004-37003
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $1,050.00
Sale: $945.00
Save: 10%
Save: $105.00
RSV4 Suter Clutch
Description:
Suter Racing Suterclutch Aprilia Rsv4 09-21 004-49002
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
Item #: 004-49002
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $1,050.00
Sale: $945.00
Save: 10%
Save: $105.00
Description:
Precut kit includes left and right tank grips
Item #: 62-0004-SS
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $79.95
Description:
Teknofibra Extra Light Thermal Reflective Belly Pan Kit 30"x12"' .8mm Thickness 0121710638
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
Item #: 0121710638
Condition:
New
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any
questions.
Price: $79.38
Description:
TIGHTAILS APRILIA RSV4 09'+ SUBFRAME APRRSV4SUB
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: APRRSV4SUB
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $473.00
Description:
TIGHTAILS APRILIA RSV4 09'+ UPPER FAIRING STAY APRRSV4UPP
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: APRRSV4UPP
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $165.00
RS660 & Tuono TK Front rotor set
Description:
TK Dischi Freno Evo 330mm x 5.75mm Self Ventilating Floating Rotors for Competition use only to fit Aprilia RSV4 RF from 2017-2020 and the RSV4 and Tuono 1100
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
Item #: A01E
Condition:
New
On-hand inventory ships within 24 hours. please expect a 4 week ETA from manufacturer when out of stock. All Custom color and narrow band options have a 4-6 week eta
Price: $1,075.00
Description:
TK Dischi Freno Evo 330mm x 5.75mm Self Ventilating Floating Rotors for Competition use only to fit Aprilia RSV4 RF from 2017-2020 and the RSV4 and Tuono 1100
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
Item #: A06E
Condition:
New
On-hand inventory ships within 24 hours. please expect a 4 week ETA from manufacturer when out of stock. All Custom color and narrow band options have a 4-6 week eta
Price: $1,075.00
Description:
Translogic QSXi Quickshifter 2000-2003 Aprilia RSV TLS-QSXi-S-DCS
1dn 5up or 1up 5dn road or race pattern
Aprilia Quickshifter for RSV model year 2000 to 2003 with tie rod and rear-sets with standard road shift or inverted race shift gear lever set-up QSXi Intellishift Quickshifter. Unique and powerful! Featuring our very latest superior Intellishift protocol providing the very best quickshifting possible. These advanced Intellishift quickshifters are the smallest multi-channel systems available and unlike other single channel quickshifters our latest range of Intellishift systems provide the finest MotoGP seamless shift simulation. Now with even more adjustment possibilities for professional users and throttle blipper output, its a winner!.Item #: TLS-QSXi-S-DCS
Condition:
New
Translogic- On-hand inventory ships within 24 hours: We order Directly from Translogic once per month. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Supply-chain related delays are possible.
Price: $439.00
Description:
Translogic QSXi Quickshifter 2004-2008 Aprilia RSV & RSVR TLS-QSXi-V-DCS
1dn 5up or 1up 5dn road or race pattern
Aprilia Quickshifter for RSV & RSVR models 2004 to 2008 (2 spark plugs) with tie rod and rear-sets with standard road shift or inverted race shift gear lever set-up QSXi Intellishift Quickshifter. Unique and powerful! Featuring our very latest superior Intellishift protocol providing the very best quickshifting possible. These advanced Intellishift quickshifters are the smallest multi-channel systems available and unlike other single channel quickshifters our latest range of Intellishift systems provide the finest MotoGP seamless shift simulation. Now with even more adjustment possibilities for professional users and throttle blipper output, its a winner!.Item #: TLS-QSXi-V-DCS
Condition:
New
Translogic- On-hand inventory ships within 24 hours: We order Directly from Translogic once per month. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Supply-chain related delays are possible.
Price: $439.00
RS660 quickshifter
Description:
Aprilia replacement Quickshifter DCS sensor for 660 models with standard road shift or inverted race shift set-up (includes tie-rod assembly which can be adjusted to suit standard or aftermarket rear sets). Replaces Aprila OEM sensor with small 3 way white connector.
Item #: TLS-DCS-J3-APR-660-ASY
Condition:
New
Limited Supply: Only 2 Left!
Translogic- On-hand inventory ships within 24 hours: We order Directly from Translogic once per month. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Supply-chain related delays are possible.
Price: $289.00
Sale: $251.10
Save: 13%
Save: $37.90
Description:
Vesrah Brake Pads VD-9053XX
*Sold per caliper
Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
*Sold per caliper
Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
Item #: VD-9053XX
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $155.40
Description:
Vesrah Brake Pad ZD-9031CT
*Sold per caliper
Will fit :
HONDA SPORT TOURING MODELS:
2014 - 2015 CB1000RS (AC)
SUZUKI SPORT TOURING MODELS:
2013 - 2015 GSX1300R (Hayabusa)
2013 - 2015 GSX1300R ABS (Hayabusa ABS)
SUZUKI SPORT MODELS:
2011 - 2015 GSX-R600 (Brembo Calipers)
2011 - 2015 GSX-R750 (Brembo Calipers)
2012 - 2015 GSX-R1000 (Brembo Calipers)
APRILIA SPORT MODELS:
2009 - 2014 RSV4 (Factory APRC ABS)
2010 - 2015 RSV4-R (APRC ABS)
BIMOTA MODELS:
2009 - 2014 DB7 (1099cc)
2010 - 2014 DB8 (Bipost 1198cc)
2013 DB8SP (Monopost 1198cc)
2013 - 2014 DB11 (VLX 1200cc)
2014 BB3 (1000cc)
BMW MODELS:
2008 - 2010 HP2 (1100cc)
2008 HP2 (1200cc)
DUCATI MODELS:
2007 - 2009 1098, 1098R
2009 - 2014 1198 (Standard, S, R and SP Models)
2012 - 2015 1199 Panigale (Stnard, S and R Models)
2009 - 2014 1099 Streetfighter
2009 - 2012 1099 Streetfighter S
2010 - 2014 Hypermotard (1100 Evo, Evo SP)
2012 - 2013 848 EVO (Corse Special Edition)
2010 - 2014 848 EVO (Monobloc front calipers)
2014 Superleggera 1198
2007 - 2009 1100S Hypermotard
2008 DD16RR (Desmocedici)
2011 - 2014 Diavel ABS
2012 - 2014 Diavel AMG
2011 - 2014 Diavel Carbon ABS
2011 - 2014 Diavel Chormo
2013 - 2014 Diavel Dark ABS
2013 - 2014 Diavel Strada
2014 Monstar S (1198)
HUSQVARNA MODELS:
2012 - 2014 Nuda 900R ABS
KTM MODELS:
2009 - 2011 SM-R 990
2014 Duke R 690
2008 - 2013 RC8 1190
2010 - 2013 RC8 1190R
2011 - 2013 RC8 1190R Track
2014 Super Duke R (1290cc)
MV AGUSTA MODELS:
2012 - 2013 F3 Serie Oro (675cc)
2011 - Brutale 990R
2010 - 2014 F4 ABS (998cc)
2012 - 2014 F4R (Corsa Corta)
2012 - 2014 F4R ABS (Corsa Corta ABS)
2012 - 2014 F4RR (Corsa Corta)
2012 - 2014 F4RR ABS (Corsa Corta ABS)
2008 - 2011 F4 CC
2008 - 2011 F4 RR
2009 - 2014 Brutale RR
TRIUMPH MODELS:
2011 - 2014 Daytona R Triple 675cc w/ Brembo Calipers
2012 - 2014 Spreedtripple R 1050cc w/ Brembo Calipers
Vesrah the top racing brake pads manufacture has brought it's world class racing brake technology to the street. The Vesrah RJL-CT Compound (Also know as the ZD-CT Sports Pad)
The RJL-CT Brake Pad compound is the perfect choice for Sport Touring, Gold Wing, Touring and Heavy Cruiser motorcycles.
*Sold per caliper
Will fit :
HONDA SPORT TOURING MODELS:
2014 - 2015 CB1000RS (AC)
SUZUKI SPORT TOURING MODELS:
2013 - 2015 GSX1300R (Hayabusa)
2013 - 2015 GSX1300R ABS (Hayabusa ABS)
SUZUKI SPORT MODELS:
2011 - 2015 GSX-R600 (Brembo Calipers)
2011 - 2015 GSX-R750 (Brembo Calipers)
2012 - 2015 GSX-R1000 (Brembo Calipers)
APRILIA SPORT MODELS:
2009 - 2014 RSV4 (Factory APRC ABS)
2010 - 2015 RSV4-R (APRC ABS)
BIMOTA MODELS:
2009 - 2014 DB7 (1099cc)
2010 - 2014 DB8 (Bipost 1198cc)
2013 DB8SP (Monopost 1198cc)
2013 - 2014 DB11 (VLX 1200cc)
2014 BB3 (1000cc)
BMW MODELS:
2008 - 2010 HP2 (1100cc)
2008 HP2 (1200cc)
DUCATI MODELS:
2007 - 2009 1098, 1098R
2009 - 2014 1198 (Standard, S, R and SP Models)
2012 - 2015 1199 Panigale (Stnard, S and R Models)
2009 - 2014 1099 Streetfighter
2009 - 2012 1099 Streetfighter S
2010 - 2014 Hypermotard (1100 Evo, Evo SP)
2012 - 2013 848 EVO (Corse Special Edition)
2010 - 2014 848 EVO (Monobloc front calipers)
2014 Superleggera 1198
2007 - 2009 1100S Hypermotard
2008 DD16RR (Desmocedici)
2011 - 2014 Diavel ABS
2012 - 2014 Diavel AMG
2011 - 2014 Diavel Carbon ABS
2011 - 2014 Diavel Chormo
2013 - 2014 Diavel Dark ABS
2013 - 2014 Diavel Strada
2014 Monstar S (1198)
HUSQVARNA MODELS:
2012 - 2014 Nuda 900R ABS
KTM MODELS:
2009 - 2011 SM-R 990
2014 Duke R 690
2008 - 2013 RC8 1190
2010 - 2013 RC8 1190R
2011 - 2013 RC8 1190R Track
2014 Super Duke R (1290cc)
MV AGUSTA MODELS:
2012 - 2013 F3 Serie Oro (675cc)
2011 - Brutale 990R
2010 - 2014 F4 ABS (998cc)
2012 - 2014 F4R (Corsa Corta)
2012 - 2014 F4R ABS (Corsa Corta ABS)
2012 - 2014 F4RR (Corsa Corta)
2012 - 2014 F4RR ABS (Corsa Corta ABS)
2008 - 2011 F4 CC
2008 - 2011 F4 RR
2009 - 2014 Brutale RR
TRIUMPH MODELS:
2011 - 2014 Daytona R Triple 675cc w/ Brembo Calipers
2012 - 2014 Spreedtripple R 1050cc w/ Brembo Calipers
Vesrah the top racing brake pads manufacture has brought it's world class racing brake technology to the street. The Vesrah RJL-CT Compound (Also know as the ZD-CT Sports Pad)
The RJL-CT Brake Pad compound is the perfect choice for Sport Touring, Gold Wing, Touring and Heavy Cruiser motorcycles.
Item #: ZD-9031CT
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $69.30
Description:
Clear race screen fits US model 09-15 and Euro model 09-14
Item #: 25-973-01
Condition:
New
Limited Supply: Only 1 Left!
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $99.95
Sale: $84.96
Save: 15%
Save: $14.99
Description:
Replaces oem fairing bracket for a lightweight aluminum bracket.
Item #: ALU4002A
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $172.02
Description:
RSV4 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM510A
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $118.22