Description: Rotobox BOOST Front Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 180 kg / 400 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!

Description: Rotobox BOOST Front Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 180 kg / 400 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!

Description:

Description: COST OF SPRINGS INCLUDED IN PRICE

The STX46 Street Performance Line is based on our popular STX46 DR1 shock absorber and developed for naked sports bikes and street performance bikes. It features a large 46mm main piston and an internal gas reservoir within the main body of the shock.

With adjustable damping you can change the behavior of the shock to suit your taste and even fit a hydraulic spring pre loader to change the stance of the bike. This is the perfect choice for the naked sports bike, or as well call it: Street Performance Line.

Description: Rotobox RBX2 Front Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 150 kg / 330 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale

Description: Rotobox RBX2 Symmetric Rear Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.0"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 250 kg / 550 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale

Description: ATTACK PERFORMANCE GP SHIFT BELL CRANK KIT, KTM, BLACK 80611014B
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: ATTACK PERFORMANCE REAR SET KIT, 1290 KTM SUPERDUKE 14-19 , BLACK (REPLACEMENT PARTS) 806110BE
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: Bonamici Racing Aluminium Clutch Lever KTM 790/890 Duke (2018/>), 890 Duke R (2021/>) LC180

Description: Bonamici Racing Aluminium Lever Kit KTM 790/890 Duke (2018/>) KL300

Description: Bonamici Racing Aluminium Rearsets KTM 790 / 890 Duke 2018 - 2023 KT04

Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure compatibility, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment, after this their parts are fine tuned, tested and validated through various levels of Motorsport meaning you can have complete confidence in these Rearsets to transform your KTM! These Rearsets allow you to decide where you would like the footpegs to be mounted, featuring multiple different mounting positions you can rest assured that these Rearsets will improve the handling, comfort and appearance of your Duke 790!

Description: Bonamici Racing Engine Protection Right Side For KTM 1290 Superduke 2013 - 2019 CP058

From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash.
The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No glue is needed!
High end quality made in Italy

Description: * Pricing is per caliper, dual disc applications must order two
NOTE: We recommend replacing piston seals when installing the ventilated Caliper Racing Pistons

Description:

17 RCS Corsa Corta, Long Lever, Radial, Front

The 17mm version is designed to respond optimally to the needs of a growing number of motorbikes using brake calipers with 30 mm diameter pistons: Ducati Panigale and Monster 1200, Kawasaki H2 and ZX10R, Yamaha R1 and R6, KTM Superduke and MV Agusta F4RR.

The size is the perfect solution for ensuring the best performance and driving sensitivity with brake calipers that have 30 mm pistons, such as Brembo M50 calipers.


The Brembo radial master cylinder with 6 different brake modulation options. The 17 RCS CORSA CORTA is characterized by the possibility it provides the rider to adapt the braking "bite point" to the desired riding feeling, in addition to the RCS (Ratio Click System), introduced 10 years ago on the Brembo 19RCS radial brake master cylinder, which allows the center distance of the master cylinder to be adjusted to "18" or "20".
The meticulous study to improve the master cylinder has allowed Brembo to propose three brake master cylinders in one and to further improve braking system performance. Furthermore, taking advantage of the mixture stemming from the 18 to 20 center distance and the three maps - R,S,N - no less than 6 different combinations can be attained.
The play selector lets the rider choose between the three different available feeling maps. With the Normal map, the bite point position is such to guarantee a more gradual initial phase and is therefore suitable for city riding or braking in poor grip conditions. With the Sport map, the bite point position is such to shorten the initial phase compared to the N setting. This second map allows for a more dynamic response and a sportier riding style.
Lastly, with the Race map, the eccentric device allows the initial phase to be shortened even more, taking it to a minimum value at the same level as the master cylinders used in MotoGP: this way, the rider is able to reach the braking bite point at lighting fast speeds. This third map is ideal for a racing riding style that shaves off precious hundredths of a second in braking.
The RCS system (Ratio Click System), on the other hand, shifts the distance between the fulcrum point and the point of application on the master cylinder push rod by 2 millimeters: this results in a different distribution of the braking force without it being modified in terms of pure power.
The master cylinder body is made of forge aluminum alloy, machined with 5-axis CAM technology. A hard oxide coating is used for the surface finish, which guarantees that the master cylinder main body is highly resistant to wear and its components move easily. The floating piston and the seals derive directly from those used in MotoGP, as do the housings for the bleeding and fueling systems, which are inclined by more than 30° to make bleeding the master cylinder easier. A study was conducted for the design of the 19RCS CORSA CORTA in order to find consistency of style between all the components of the master cylinder, which now has a distinct, dynamic and sporty look in line with the style of the bikes for which it was conceived (model or design filed simultaneously with the filing of the patent on the technological solution). The lever assembly can be replaced without disassembling the RCS system (Ratio Click System) from the master cylinder and this allows the calibrations made in the installation phase to be maintained unaltered.

Description: DYMAG UP7X FORGED ALUMINUM FRONT WHEEL KTM 790 DUKE 2018

Front Dymag Aluminum UP7X Front Wheel comes in one size
17 x 3.5" (standard/OEM)

-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.

Description: DYMAG UP7X FORGED ALUMINUM REAR WHEEL KTM 790 DUKE 2018

Front Dymag Aluminum UP7X Rear Wheel comes in three sizes
17 x 5.50"
17 x 6.00" (OEM)
17 x 6.25"


-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-Free Rear Aluminum Sprocket Included in 520, 525, 530 pitch
-Sample Total weight 12.3 lbs (ie. Dymag UP7X ZX10R Rear Wheel)
-All Dymag wheels come fitted with Black sprocket carrier, Talon gold or Black anodised sprocket and standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, just send us an email!

Description: Evol Technology Replacement Heelguard Left for KTM RC390, RC8

Description Not Available Now

Find Evol Technology's ET-HG-L.KTM Evol Technology Replacement Heelguard Left for KTM RC390, RC8 and other parts you need at hhrperformance.com - HHR Performance, Sandpoint, Idaho

Description: Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for KTM 250/390RC (2015/2020) - CLUTCH K2539
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: MIVV NO-KAT Pipe Exhaust For KTM 1290 SUPERDUKE 2014 - 2019 KT.014.C1