- Home »
- Catalog
HHR Performance » 2020, BMW
Products for:
- Year: 2020
- Make: BMW
View Universal items for: 2020 BMW
Browse Products
Description:
Fits all years for BMW S1000RR
Works with Solo 2
Genuine AIM Quality
Works with Solo 2
Genuine AIM Quality
Item #: X46KSBMWS1
Condition:
New
Limited Supply: Only 1 Left!
Aim Supply has been severely affected due to material shortages and most products are currently on a 3 month delivery date. Please send us an email request to find out ETAs.
Price: $30.00
Description:
Armour Bodies 71-0757SS BMW S1000RR 2020-22 Supersport Kit 71-0757SS
Item #: 71-0757SS
Condition:
New
Price: $924.99
Cast wheel Replacement Rotobox S1000R/RR/M1000RR 2020-22
Description:
Rotobox BOOST Front Wheel for BMS S1000RR K67
This wheel uses the rotors for the Standard Cast wheels so if ordering for spare wheels you will need to order the Rotors for the Cast wheel fitment
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
This wheel uses the rotors for the Standard Cast wheels so if ordering for spare wheels you will need to order the Rotors for the Cast wheel fitment
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350374
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
Description:
Features
NIX-technology
External rebound, compression and spring preload adjusters
Easy to change settings for individual preferences, based on our Setting Bank
Wide range of spring rates available in the 08790-series
Easy to install and service
Available for all Supersport models
Item #: FGK 240
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,229.00
Description:
FKR Cartridge Kit Racing (TTX 25) FKR 122
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 122
Type Code
TTX25 Cartridge Kit FKR
Technical data
| Spring series: | 08790-Serie, 04744-Serie |
|---|---|
| Recommended oil: | 01309 |
| Packaging included: | springs 9.5, 10.0 & 10.5 |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
BMW S 1000 RR (2019 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Öhlins product news BMW S1000RR 2019 (173,8 KB)
- Mounting Instructions FKR 122 English (664,3 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Öhlins Produkt News BMW S1000RR 2019 (179,4 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
Item #: FKR 122
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,349.00
Description:
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Street Cartridge Kit FKS 505
The NIX 30 Street cartridge kit features new designed black top caps to give the bike a more subtle look. The “NIX” technology is developed from high level racing such as WSBK to deliver the utmost performance on road as well as on track. Changing to the NIX 30 street cartridge kit is easy. It fits bolt on in the standard fork legs and gives you adjustable compression and rebound damping separated in each leg, as well as preload adjustment, all accessible from the black top caps.
The NIX 30 Street cartridge kits are delivered without springs. The springs need to be ordered separately to suite customer’s choice of spring rate.
Part number
FKS 505
Type Code
NIX30
30
Piston diameter: 30 mm
Technical data
| Length: | 691 mm |
|---|---|
| Position: | front |
| Spring series: | 08790-Serie |
| Recommended oil: | 01309-01 |
| Oil level mm: | 130mm |
| Packaging unit: | pair |
Notes
Springs have to be ordered separately.
It is recommended to contact an ÖHLINS Service Center for installation.
Fits for vehicles
BMW R nineT (2017 – 2020)
- ABE (Germany)
Download
- Mounting Instructions FKS 505 English (602,3 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FKS 505 German (599,0 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Item #: FKS 505
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,049.00
Description:
Öhlins NIX 22 Cartridge Kit FKS 220
Öhlins NIX 22 cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of performance together with stable damping characteristics while ensuring great comfort and contributing to rider confidence. With the NIX22 cartridge kits this also available for motorcycles with conventional front forks.
Each NIX 22 Öhlins cartridge kit has been tested extensively and tailor made to suit the individual requirements and characteristics for each individual bike. In combination with the well proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg, it allows for a more precise function and stability. All adjustments including spring preload are made at the top cap.
The Öhlins cartridge system fits into the original front fork, springs have to be ordered individually. Please follow our recommendations regarding spring rates and oil in relation to rider's weight and preference listed in the specific cartridge kit's mounting instruction.
Part number
FKS 220
Type Code
NIX 22
Technical data
| Length: | 748 mm |
|---|---|
| Stroke: | 125 mm |
| Position: | front |
| Spring series: | 08429-xx |
| Recommended oil: | 01309 |
| Oil level mm: | 145 mm |
| Packaging unit: | pair |
Notes
Springs are not included in the kit and have to be ordered individually.
It is recommended to contact an ÖHLINS Service Center for installation.
Fits for vehicles
BMW R nineT /5 (2018 – 2020)
- ABE (Germany)
BMW R nineT Pure (2017 – 2021)
- ABE (Germany)
BMW R nineT Racer (2017 – 2020)
- ABE (Germany)
Item #: FKS 220
Condition:
New
If no inventory is listed above, please expect 1-to-12-week ETA from the manufacturer. Feel free to contact us if you have any questions.
Price: $729.00
Description:
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350340
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
Description:
Rotobox BOOST Symmetric Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600748
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,410.00
Description:
This fairing is for the Trackday enthusiast that is still requiring the use of headlights and a sidestand for street riding.
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Carbon Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit with this bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Carbon Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit with this bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
Item #: CB42100-CUTF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,184.76
Description:
FGRT Upside Down Front Fork Road & Track FGRT 226
It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The new Road & Track front fork will give you loads of performance, stable damping and fantastic comfort. The new Road & Track front fork features the Öhlins 30 mm Cartridge Kit inside, a winning kit in several national superbike championships.
Compression and rebound adjustments are easily done with compression adjustment in one leg and rebound
adjustment in the other leg. The new front fork gives a big improvement in tire feel, brake support and the general handling of the bike. The outer design has been redesigned to make this front fork even more attractive.
Part number
FGRT 226
Technical data
| Length: | 740 mm |
|---|---|
| Stroke: | 120 mm |
| Rate N/mm: | 9,0 N/mm |
| Position: | front |
| Mounted spring: | 04744-90 |
| Spring series: | 04744-Serie & 08790-Serie |
| Recommended oil: | 01309 |
| Packaging unit: | pair |
Fits for vehicles
BMW R nineT (2017 – 2020)
- "ABE" in preparation (Germany)
Download
- Mounting Instructions FGRT 226 English (437,0 KB)
- Owner´s Manual Front Fork FGRT Series Road & Track English (1.895,5 KB)
- Mounting Instructions FGRT 226 German (474,2 KB)
- Owner´s Manual Front Fork FGRT Series Road & Track German (1.352,0 KB)
Item #: FGRT 226
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,699.00
Description:
FGRT Upside Down Front Fork Road & Track FGRT 227
It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The new Road & Track front fork will give you loads of performance, stable damping and fantastic comfort. The new Road & Track front fork features the Öhlins 30 mm Cartridge Kit inside, a winning kit in several national superbike championships.
Compression and rebound adjustments are easily done with compression adjustment in one leg and rebound
adjustment in the other leg. The new front fork gives a big improvement in tire feel, brake support and the general handling of the bike. The outer design has been redesigned to make this front fork even more attractive.
Part number
FGRT 227
Technical data
| Length: | 740 mm |
|---|---|
| Stroke: | 120 mm |
| Rate N/mm: | 9,0 N/mm |
| Position: | front |
| Mounted spring: | 04744-90 |
| Spring series: | 04744-Serie & 08790-Serie |
| Recommended oil: | 01309 |
| Packaging unit: | pair |
Fits for vehicles
BMW R nineT (2017 – 2020)
- "ABE" in preparation (Germany)
Download
- Mounting Instructions FGRT 227 English (436,9 KB)
- Owner´s Manual Front Fork FGRT Series Road & Track English (1.895,5 KB)
- Mounting Instructions FGRT 227 German (474,5 KB)
- Owner´s Manual Front Fork FGRT Series Road & Track German (1.352,0 KB)
Item #: FGRT 227
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,699.00
Description:
Features
NIX-technology
Weight and stress optimized fork bottom design
All adjustments at the top of the fork
Proven in various racing applications
Available for all major Supersport models
Different settings available from Öhlins setting bank
Item #: FGRT 232
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,699.00
Description:
TTX GP Shock Absorber BM 365
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.
We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!
Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
BM 365
Type Code
T36PR1C1LB
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
L
Adjustable length.
B
Integrated hydraulic spring preload adjuster. Adjuster wheel or hexagon on the adjuster.
Technical data
| Length: | 335 +4/-2 mm |
|---|---|
| Stroke: | 62 mm |
| Rate N/mm: | 75 N/mm |
| Position: | rear |
| Mounted spring: | 21040-21 |
| Packaging unit: | pieces |
Notes
This product can not be used together with the
BMW DDC System. This product can only be
used together with non-electric units.
Fits for vehicles
BMW S 1000 R (2014 – 2020)
- ABE (Germany)
Download
- Mounting Instruction BM 365 English (288,9 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (1.970,2 KB)
- Mounting Instruction BM 365 German (664,8 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (3.112,6 KB)
Item #: BM 365
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,499.00
Description:
STX 46 Blackline BM 489
Part number
BM 489
Type Code
S46DR1L
S
Single tube
46
Piston diameter: 46 mm
D
Monotube high pressure gas type of shock absorber with internal reservoir in the main body.
R1
Adjustable rebound damping on single tube shocks. Adjuster wheel above the end eye.
L
Adjustable length.
Technical data
| Length: | 368mm +10mm /-2 mm |
|---|---|
| Stroke: | 47 mm |
| Rate N/mm: | 160 N/mm |
| Position: | rear |
| Mounted spring: | 21102-64 |
| Spring series: | 21102 |
| Mounting length min/max: | 366mm / 378mm |
| Packaging unit: | pieces |
Fits for vehicles
BMW R nineT (2014 – 2020)
- "ABE" in preparation (Germany)
BMW R nineT Pure (2016 – 2020)
- "ABE" in preparation (Germany)
BMW R nineT Racer (2016 – 2020)
- "ABE" in preparation (Germany)
Download
Item #: BM 489
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $799.00
Description:
STX 46 Blackline BM 491
Part number
BM 491
Type Code
S46DR1L
S
Single tube
46
Piston diameter: 46 mm
D
Monotube high pressure gas type of shock absorber with internal reservoir in the main body.
R1
Adjustable rebound damping on single tube shocks. Adjuster wheel above the end eye.
L
Adjustable length.
Technical data
| Length: | 374mm +10 mm / -2 mm |
|---|---|
| Stroke: | 53 mm |
| Rate N/mm: | 140 N/mm |
| Position: | rear |
| Mounted spring: | 21102-54 |
| Spring series: | 21102 |
| Mounting length min/max: | 372mm / 384mm |
| Packaging unit: | pieces |
Fits for vehicles
BMW R nineT Scrambler (2016 – 2020)
- "ABE" in preparation (Germany)
BMW R nineT Urban G/S (2016 – 2020)
- "ABE" in preparation (Germany)
Download
Item #: BM 491
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are
possible. Please contact us for ETA
Price: $799.00
Description:
The STX46 Street Performance Line is based on our popular STX46 DR1 shock absorber and developed for naked sports bikes and street performance bikes. It features a large 46mm main piston and an internal gas reservoir within the main body of the shock.
With adjustable damping you can change the behavior of the shock to suit your taste and even fit a hydraulic spring pre loader to change the stance of the bike. This is the perfect choice for the naked sports bike, or as well call it: Street Performance Line.
With adjustable damping you can change the behavior of the shock to suit your taste and even fit a hydraulic spring pre loader to change the stance of the bike. This is the perfect choice for the naked sports bike, or as well call it: Street Performance Line.
Item #: BM 640
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are
possible. Please contact us for ETA
Price: $999.00
Description:
The STX46 Street Performance Line is based on our popular STX46 DR1 shock absorber and developed for naked sports bikes and street performance bikes. It features a large 46mm main piston and an internal gas reservoir within the main body of the shock.
With adjustable damping you can change the behavior of the shock to suit your taste and even fit a hydraulic spring pre loader to change the stance of the bike. This is the perfect choice for the naked sports bike, or as well call it: Street Performance Line.
With adjustable damping you can change the behavior of the shock to suit your taste and even fit a hydraulic spring pre loader to change the stance of the bike. This is the perfect choice for the naked sports bike, or as well call it: Street Performance Line.
Item #: BM 641
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are
possible. Please contact us for ETA
Price: $699.00
Description:
The STX46 Street Performance Line is based on our popular STX46 DR1 shock absorber and developed for naked sports bikes and street performance bikes. It features a large 46mm main piston and an internal gas reservoir within the main body of the shock.
With adjustable damping you can change the behavior of the shock to suit your taste and even fit a hydraulic spring pre loader to change the stance of the bike. This is the perfect choice for the naked sports bike, or as well call it: Street Performance Line.
With adjustable damping you can change the behavior of the shock to suit your taste and even fit a hydraulic spring pre loader to change the stance of the bike. This is the perfect choice for the naked sports bike, or as well call it: Street Performance Line.
Item #: BM 650
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are
possible. Please contact us for ETA
Price: $999.00
Description:
The STX46 Street Performance Line is based on our popular STX46 DR1 shock absorber and developed for naked sports bikes and street performance bikes. It features a large 46mm main piston and an internal gas reservoir within the main body of the shock.
With adjustable damping you can change the behavior of the shock to suit your taste and even fit a hydraulic spring pre loader to change the stance of the bike. This is the perfect choice for the naked sports bike, or as well call it: Street Performance Line.
With adjustable damping you can change the behavior of the shock to suit your taste and even fit a hydraulic spring pre loader to change the stance of the bike. This is the perfect choice for the naked sports bike, or as well call it: Street Performance Line.
Item #: BM 652
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are
possible. Please contact us for ETA
Price: $699.00
Description:
TTX RT Shock Absorber BM 146
Cavitation. Something you don’t want in your shock absorber. It’s devastating because basically it means the damping is lost. Small bubbles in the oil can never create the necessary damping forces. Traditional dampers working in extreme conditions sometimes suffers from low pressure on the piston backside.
The TTX was created by Öhlins engineers to eliminate the risk for cavitation. They succeeded. With the TTX technology a positive pressure balance is created in the shock which means the risk for cavitation is gone.
TTX stands for Twin Tube with the X illustrating how the flow through the valves in the cylinder head is designed. Thanks to the twin tube technology the pressure usually created on top of the piston is transferred through the cylinder head and the adjusters for compression and rebound, then flows through the space between the inner and outer tube to the other side of the solid piston.
These equals to a pressure balance within the shock. The outer reservoir is only used to take care of the oil displacement from the piston rod and heat expansion, which is why it can be fairly small in design. Inside the reservoir there is a dividing piston between the oil and the nitrogen gas.
Part number
BM 146
Type Code
T39PR1C1S
T
Twin tube
39
Piston diameter: 39 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
S
Hose mounted hydraulic spring preload adjuster.
Technical data
| Length: | 402.5 mm |
|---|---|
| Stroke: | 75 mm |
| Rate N/mm: | 140 N/mm |
| Position: | rear |
| Mounted spring: | 01103-54 |
| Packaging unit: | pieces |
Notes
ESA version can get warning light in display, this does not affect bikes performance.
Fits for vehicles
BMW R 1200 GS (2013 – 2016)
- Teilegutachten (Germany)
BMW R 1200 GS (2017 – 2018)
- Teilegutachten (Germany)
BMW R 1250 GS (2019 – )
- Teilegutachten (Germany)
Download
- Mounting Instruction Öhlins Motorcycle BM 146 (English) (521,4 KB)
- Owner´s Manual Öhlins Motorcycle TTX shock absorber Road Track (English) (1.407,4 KB)
- Mounting Instruction Öhlins Motorcycle BM 146 (German) (909,6 KB)
- Owner´s Manual Öhlins Motorcycle TTX shock absorber Road Track (German) (1.599,7 KB)
Item #: BM 146
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,399.00
Description:
Rotobox BOOST Convex Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 2.93 kg / 6.45 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 2.93 kg / 6.45 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: CA70600737
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,837.00
S1000RR M1000RR Carbonin bodywork
Description:
Parts Included with Kit
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
There are 3 options for seats
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
There are 3 options for seats
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube
Item #: B42100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,506.86
Description:
Rotobox RBX2 Front Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350140
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,922.00
Description:
Rotobox RBX2 Symmetric Rear Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: RA70600548
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $3,410.00
K67, M66, S1000RR, Bodywork,Carbonin
Description:
This fairing is for the Trackday enthusiast that is still requiring the use of headlights and a sidestand for street riding.
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Avio Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Avio Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
Item #: B42100AF-CUTF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,361.27
S1000RR Race Fairings
Description:
Parts Included with Kit
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
Optional Not Included -There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
Optional Not Included -There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CB42100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,991.04
Description:
Welcome to the latest development in superbike suspension, introducing the high side saving OVERSUSPENSION from Supreme Technology based in Italy. As seen on the WSBK Barni Racing Ducati V4!
This will fit the BMW S1000RR (2015+) and S1000R (2014+)
This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
This will fit the BMW S1000RR (2015+) and S1000R (2014+)
This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
Item #: OVS-STB/BMW1000RR
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $429.95
Description:
Supreme Technology OverSuspension for the BMW S1000RR (2015+) and S1000R (2014+) OVS-STB/BMW1000RR
Item #: OVS-STB/BMW1000RR
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $424.95
Description:
Fits all S1000RR Years 2009-2021
SOLO Harness
Works with SOLO
Genuine AIM Quality
Product Details
SOLO DL BMW S1000RR ECU interface harness
SOLO Harness
Works with SOLO
Genuine AIM Quality
Product Details
SOLO DL BMW S1000RR ECU interface harness
Item #: V02569230
Condition:
New
Aim Supply has been severely affected due to material shortages and most products are currently on a 3 month delivery date. Please send us an email request to find out ETAs.
Price: $73.00
S1000RR M1000RR Akrapovic Full System,S-B10E10-APLT
Description:
Alpha Racing Alpha Racing Akrapovic Evolution Line BMW M1000RR 2021 | S1000RR 2019-2021 AK-S-B10E10-APLT
Akrapovic Evolution Line Titanium, BMW S 1000 RR 2019- (K67), M 1000 RR 2021- (K66) and S 1000 R 2021-, full titanium system with carbon end cap
Akrapovic Evolution Line Titanium, BMW S 1000 RR 2019- (K67), M 1000 RR 2021- (K66) and S 1000 R 2021-, full titanium system with carbon end cap
Item #: AR-AK-S-B10E10-APLT
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are
allocated from the next shipment. Please note supply-chain
related delays are possible.
Price: $2,915.00
2n potentiometer extension
Description:
Alpha Racing 25 mm extension 2D suspension sensor BMW S1000RR 2019-, BMW M1000RR 2021- 7470A113A25
Spacer with threaded connection for extension of spring stroke sensors, made by 2D Datarecording.
- 25 mm extension
- Plastic part with thread
Weight: 0.003 kg
Spacer with threaded connection for extension of spring stroke sensors, made by 2D Datarecording.
- 25 mm extension
- Plastic part with thread
Weight: 0.003 kg
Item #: 7470A113A25
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $4.64
Description:
Alpha Racing 2D front suspension sensor 150 mm BMW HP4 Race 2017-2018, BMW S1000RR 2019-, BMW M1000RR 2021-7470HP001A00
2D front suspension sensor 150 mm, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer Slim Body, for M Race Calibration Kit
2D front suspension sensor 150 mm, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer Slim Body, for M Race Calibration Kit
Item #: 7470HP001A00
Condition:
New
Limited Supply: Only 1 Left!
Important for M Race Calibration Kit only, If you do not know what that is then you probably don't have it.
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $455.40
Akrapovic heat shield BMW S1000RR
Description:
Alpha Racing Akrapovic heat shield BMW S1000RR 2019-,M1000RR 2021- AK-P-HSB10E3
Akrapovic carbon heat shield, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66)
Akrapovic carbon heat shield, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66)
Item #: AK-P-HSB10E3
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $157.50
Description:
Alpha Racing Brake Fluid Reservoir Cap BMW HP4 2012 - 2014, S1000RR 2009-2016,S1000RR 2019-,M1000RR 2021 3272A015A00
Cap for brake fluid reservoir, aluminium, black anodised
Cap for brake fluid reservoir, aluminium, black anodised
Item #: 3272A015A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $43.48
Description:
Alpha Racing Clamp for triple clamp left BMW S1000RR 2019-,M1000RR 2021-31428388983
Clamp for upper triple clamp left, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), needed when racing handlebars are mounted, FIM homologated
Clamp for upper triple clamp left, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), needed when racing handlebars are mounted, FIM homologated
Item #: 31428388983
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $89.70
Description:
Alpha Racing Clamp for triple clamp right BMW S1000RR 2019-,M1000RR 2021- 31428388984
Clamp for upper triple clamp right, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), needed when racing handlebars are mounted, FIM homologated
Clamp for upper triple clamp right, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), needed when racing handlebars are mounted, FIM homologated
Item #: 31428388984
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $89.70
Description:
Alpha Racing Clutch cable Motorsport, BMW S1000RR 2019- and BMW M1000RR 2021- 2152B001A01
Clutch cable Motorsport, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for OEM and racing clutch lever
Clutch cable Motorsport, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for OEM and racing clutch lever
Item #: 2152B001A01
Condition:
New
Limited Supply: Only 5 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $52.77
Description:
Alpha Racing Cylinder head gasket 0,97 mm BMW S1000RR 2019- and M1000RR 2021- 1112B045A00
Cylinder head gasket 0,97 mm, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), 3-layered, coated
Cylinder head gasket 0,97 mm, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), 3-layered, coated
Item #: 1112B045A00
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $136.26
S1000RR Fairing Bracket
Description:
Alpha Racing Dashboard and fairing carrier, OEM dashboard BMW M1000RR 2021 4663DA00601
Dashboard and fairing carrier for OEM dashboard, for BMW M 1000 RR 2021- (K66), aluminium, black anodised, multipiece screwed
Dashboard and fairing carrier for OEM dashboard, for BMW M 1000 RR 2021- (K66), aluminium, black anodised, multipiece screwed
Item #: 4663DA00601
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $497.49
Description:
Alpha Racing Foam cube kit, OEM fuel tank BMW HP4 2012-2014, BMW S1000RR 2009-2011,BMW S1000RR 2015-2019- and BMW M1000RR 2021- 1611A047B00
Fuel tank foam kit, for BMW Superbike models, 65 cubes à 5x5x5 cm, tailored for BMW OEM fuel tank
Fuel tank foam kit, for BMW Superbike models, 65 cubes à 5x5x5 cm, tailored for BMW OEM fuel tank
Item #: 1611A047B00
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $50.44
Description:
Alpha Racing Front stand aluminium, black BMW HP4 2012-2014, BMW S1000 XR 2015- 2016, BMW S1000 R 2014-2016, BMW S1000 RR 2009-2019- and BMW M1000 RR 2021- 8123A001A01
Front stand aluminium, black anodized, pick-up inside the holes of the fork bottoms, adjustable cursors, with BMW emblem
Front stand aluminium, black anodized, pick-up inside the holes of the fork bottoms, adjustable cursors, with BMW emblem
Item #: 8123A001A01
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $260.93
Potentiometer mounts
Description:
Alpha Racing Mounting kit suspension sensor 75 mm, Öhlins TTX GP BMW S1000RR 2019- and BMW M1000RR 2021-3352B019A00
Mounting kit rear suspension sensor 75 mm, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for Öhlins TTX GP BM568, fits to 2D suspension potentiometer 75 mm
Mounting kit rear suspension sensor 75 mm, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for Öhlins TTX GP BM568, fits to 2D suspension potentiometer 75 mm
Item #: 3352B019A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $43.48
S1000RR k67 M1000RR wheels
Description:
Alpha Racing OZ wheel set Cattiva RS-A BMW S1000RR 2020+ 3631B003A00
OZ Motorbike racing wheel set Cattiva RS-A V2 3,5"/6,00"x17", for BMW S 1000 RR 2020- (K67), forged aluminium wheels, 6 spokes, black matt anodized, incl. sprocket carrier
OZ Motorbike racing wheel set Cattiva RS-A V2 3,5"/6,00"x17", for BMW S 1000 RR 2020- (K67), forged aluminium wheels, 6 spokes, black matt anodized, incl. sprocket carrier
Item #: 3631B003A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $3,229.67
Description:
Alpha Racing PVM front wheel 3V Design BMW S 1000 RR 2019- 3631B300A01
The 3V Racing wheel by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.
PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.
Features:
- Aluminum Racing forged wheel
- 6-spoke design
- anodized, titanium colored
- for OEM and racing brake discs
- incl. 90° angle valve
- Rim anti-slip coated
Please note:
- Racing wheel, only for professional race track use.
Weight: 2.96 kg
Comparative values:
BMW OEM forged wheel: 3.14 / 4.42 kg (front/rear, without valves)
BMW OEM carbon wheel: 2.50 / 3.30 kg (front/rear, without valves)
The 3V Racing wheel by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.
PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.
Features:
- Aluminum Racing forged wheel
- 6-spoke design
- anodized, titanium colored
- for OEM and racing brake discs
- incl. 90° angle valve
- Rim anti-slip coated
Please note:
- Racing wheel, only for professional race track use.
Weight: 2.96 kg
Comparative values:
BMW OEM forged wheel: 3.14 / 4.42 kg (front/rear, without valves)
BMW OEM carbon wheel: 2.50 / 3.30 kg (front/rear, without valves)
Item #: 3631B300A01
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $1,658.32
Description:
Alpha Racing PVM rear wheel 3V Design BMW S 1000 RR 2019- 3631B300A02
The 3V Racing wheel by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.
PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.
Features:
- Aluminum Racing forged wheel
- 6-spoke design
- anodized, titanium colored
- for OEM and racing brake discs
- incl. 90° angle valve
- Rim anti-slip coated
Please note:
- Racing wheel, only for professional race track use.
- Sprocket with inner diameter 76 mm required.
Weight: 4.00 kg
Comparative values:
BMW OEM forged wheel: 3.14 / 4.42 kg (front/rear, without valves)
BMW OEM carbon wheel: 2.50 / 3.30 kg (front/rear, without valves)
The 3V Racing wheel by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.
PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.
Features:
- Aluminum Racing forged wheel
- 6-spoke design
- anodized, titanium colored
- for OEM and racing brake discs
- incl. 90° angle valve
- Rim anti-slip coated
Please note:
- Racing wheel, only for professional race track use.
- Sprocket with inner diameter 76 mm required.
Weight: 4.00 kg
Comparative values:
BMW OEM forged wheel: 3.14 / 4.42 kg (front/rear, without valves)
BMW OEM carbon wheel: 2.50 / 3.30 kg (front/rear, without valves)
Item #: 3631B300A02
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $1,959.83
Description:
Alpha Racing PVM wheel set 3V Design, S 1000 RR 2019- 3631B300A00
The 3V Racing wheel set by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.
PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.
Features:
- Aluminum Racing forged wheel set
- 6-spoke design
- anodized, titanium colored
- incl. sprocket carrier
- for OEM and racing brake discs (front/rear)
- incl. 90° angle valves
- front and rear wheel rim anti-slip coated
Please note:
- Racing wheel set, only for professional race track use.
- Sprocket with inner diameter 76 mm required.
Weight: 7.62 kg
Front wheel 2.96 kg
Rear wheel 4.00 kg
Sprocket carrier 0.66 kg
Comparative values:
BMW OEM forged wheel: 3.14 / 4.42 kg (front/rear, without valves)
BMW OEM carbon wheel: 2.50 / 3.30 kg (front/rear, without valves)
The 3V Racing wheel set by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.
PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.
Features:
- Aluminum Racing forged wheel set
- 6-spoke design
- anodized, titanium colored
- incl. sprocket carrier
- for OEM and racing brake discs (front/rear)
- incl. 90° angle valves
- front and rear wheel rim anti-slip coated
Please note:
- Racing wheel set, only for professional race track use.
- Sprocket with inner diameter 76 mm required.
Weight: 7.62 kg
Front wheel 2.96 kg
Rear wheel 4.00 kg
Sprocket carrier 0.66 kg
Comparative values:
BMW OEM forged wheel: 3.14 / 4.42 kg (front/rear, without valves)
BMW OEM carbon wheel: 2.50 / 3.30 kg (front/rear, without valves)
Item #: 3631B300A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $3,583.36
Description:
Alpha Racing Racing rear brake line BMW S1000 RR 2019- 3432B005A00
Racing rear brake line, for racing rearset, for BMW S 1000 RR 2019- (K67), one-piece
Racing rear brake line, for racing rearset, for BMW S 1000 RR 2019- (K67), one-piece
Item #: 3432B005A00
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $88.72
Description:
Alpha Racing Racing rearset SBK 2019-2021 BMW S1000RR & 2021 BMW M1000R 4670-B210-003
Racing rearset SBK, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), to be used with inverted or standard shift pattern, multiple adjustments possible, racing only
Racing rearset SBK, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), to be used with inverted or standard shift pattern, multiple adjustments possible, racing only
Item #: 4670-B210-003
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $972.96
Description:
Alpha Racing Radiator Cap, 1.8 Bar BMW HP4 2012-2014, BMW HP4 Race 2017-2018, BMW S1000R 2015-2017-, BMW S1000RR 2009-2019- and BMW M1000RR 2021- 17117687715
Radiator cap 1.8 bar, for OEM radiator different models
Radiator cap 1.8 bar, for OEM radiator different models
Item #: 17117687715
Condition:
New
Limited Supply: Only 5 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $40.59
Description:
2020 S1000rr front fender for racing
Item #: B4010AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $140.02
Description:
S1000rr rear fender in avio fiber
Item #: B4020AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $132.02
Description:
Lightweight Carbon fender Oem Replacement
Item #: CB4010
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $260.83
S1000RR M1000RR Rear Fender Hugger
Description:
Carbon fiber rear fender oem replacement
Item #: CB4020
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $256.03
Description:
Extreme Components Engine protectors in aluminium fully whole billet with 3d machining 4 PIECE for BMW S1000RR (2019/2020) (pick up + alternator + clutch + water pump) - PROT-ENG 4 S1000RR 19
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 4 S1000RR 19
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $527.35
Description:
Extreme Components GP EVO rear sets kit for BMW S1000RR (2019/2020) (standard and reverse shifting) with aluminium heel guard (black) - PED-GP EVO S1000RR 19
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO S1000RR 19
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $668.25
Description:
Extreme Components GP EVO rear sets kit for BMW S1000RR (2019/2020) (standard and reverse shifting) with carbon fiber heel guard (black) - PED-GP EVO S1000RR 19C
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO S1000RR 19C
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $741.15
Description:
Extreme Components GP EVO rear sets kit for BMW S1000RR (2019/2020) (standard and reverse shifting) with carbon fiber heel guard (silver) - PED-GP EVO S1000RR 19B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO S1000RR 19B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $741.15
Description:
Welcome to the latest development in superbike suspension, introducing the high side saving OVERSUSPENSION from Supreme Technology based in Italy. As seen on the WSBK Barni Racing Ducati V4!
This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
Item #: OVS-STB/BMW1000XR
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $429.95
Description:
Quick Info
EVO4 BMW S1000RR ECU harness
Easy Install
Genuine AIM Quality
Product Details
EVO4 BMW S1000RR ECU harness
EVO4 BMW S1000RR ECU harness
Easy Install
Genuine AIM Quality
Product Details
EVO4 BMW S1000RR ECU harness
Item #: V02563200
Condition:
New
Aim Supply has been severely affected due to material shortages and most products are currently on a 3 month delivery date. Please send us an email request to find out ETAs.
Price: $73.00