- Home »
- Catalog
HHR Performance » 2021
Products for:
- Year: 2021
View Universal items for: 2021
Browse Products
|
TFT active matrix RGB 6” display
Exclusive graphics styles
Day & night mode
Data logger
4 layout pages
GPS data
Laptimes & track info
Analogic inputs for up to 4 sensors
Extra channels from ECU
User configurable page
Racing kit for Suzuki GSX-R 1000
Thanks to its dedicated RACING KIT, the dash turns into a complete datalogger with every feature you may need on track.
Every element is designed to extend the huge potentiality of your bike, recording data to be downloaded and analyzed with our proprietary software Race Studio Analysis 3.
By adding the GPS09 Module to your MXPS, you may get your lap times and track data.
Featuring wide database of tracks, your dash logger will automatically recognize the track you are approaching, recording all the data coming from your ECU, as well as from the GPS.
With the kit you can read 28 ECU extra channels and connect up to 4 sensors for a precise regulations of the setup.
Now you have total control of your GSX-R 1000, with the potential to drastically improve your performance.
For these Aprilia models:
RSV4 RR/RF from 2017
RSV4 1100 from 2019
Tuono V4 RR/Factory from 2017
• upper race fairing (6 Dzus)
• lower fairing
• left side panel 2Dzus
• right side panel 3 Dzus
• single Tail unit (4pcs) Superbike style, OEM seat can not be used
Required Parts
• Stainless steel Seat Unit bracket with dzus *Required to install tail section IN1801Y
• Stainless steel Lower left bracket with dzus (only required if stock bracket is not present) IN1802Y
Not Included
• Fenders
• Airbox Cover
• Seat Unit
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)
Not included but required:
IN1901Y Seat Bracket
*Cannot fit OEM Seat
Upper (4 Dzus)
Lower
Left side panel (7 Dzus)
Cover left side Panel
Right side panel (7 Dzus)
Cover right side panel
Single race tail unit
Seat Unit Battery Tray
Seat Support
Right and Left wings
*Cannot fit OEM Seat
Kickstand can be used (trackday bonus)
No Options for Headlight or tail light cutouts
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)
The 2017-2021 GSXR1000 Bodywork requires the following bracketry for fitment:
Aluminum CNC Inserts Side Panels (ALU1202S)
Inox Holders for Lower Fairing (IN1202S)
The The 2017-2021 GSXR1000 Bodywork also will require 1 of the 2 following tail unit inserts:
Aluminum CNC Tail Inserts Quick Release (Quick Release Bracket w/ DZUS) (ALU1204SCNC)
Aluminum CNC Tail Inserts Bolt On (Hard Mount w/ Bolt) (ALU1204SR)
There are 3 seat options available.
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit Carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Tail unit will not work with OEM Seat.
This wheel uses the rotors for the Standard Cast wheels so if ordering for spare wheels you will need to order the Rotors for the Cast wheel fitment
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Features
Features
FKR Cartridge Kit Racing (TTX 25) FKR 102
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 102
Type Code
TTX25 Cartridge Kit FKR
Technical data
| Spring series: | 04744-Serie |
|---|---|
| Packaging included: | springs 9.5, 10.0, 10.5N/mm |
Notes
Racing only! Kit comes with 3 different spring rates: 9.5, 10 & 10.5N/mm.
Fits models with Kayaba OEM fork.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha YZF-R1 (2015 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Yamaha YZF-R6 (2017 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Mounting Instructions FKR 102 English (696,2 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Mounting Instructions FKR 102 German (732,8 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 122
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 122
Type Code
TTX25 Cartridge Kit FKR
Technical data
| Spring series: | 08790-Serie, 04744-Serie |
|---|---|
| Recommended oil: | 01309 |
| Packaging included: | springs 9.5, 10.0 & 10.5 |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
BMW S 1000 RR (2019 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Öhlins product news BMW S1000RR 2019 (173,8 KB)
- Mounting Instructions FKR 122 English (664,3 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Öhlins Produkt News BMW S1000RR 2019 (179,4 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
Öhlins TTX 25 Cartridge Kit (FKR 100) FKR 126
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 126
Type Code
TTX25 Cartridge Kit FKR
Technical data
| Spring series: | 04744-Serie |
|---|---|
| Packaging included: | springs 9.5, 10.0, 10.5N/mm |
Notes
Fits models with Öhlins fork FL 940, FL 942 or FL 943!
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha YZF-R1M (2020 – 2021)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
- Fits OEM Öhlins FL 940/FL 942/FL 943 fork
Features
NIX 22 Cartridge Kit FKS 204
Öhlins cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of performance together with stable damping characteristics while ensuring great comfort and contributing to rider confidence. With the NIX22 cartridge kits this now available for motorcycles with conventional front forks.
Each Öhlins cartridge kit has been tested extensively and tailor made to suit the individual requirements and characteristics for each individual bike. In combination with the well proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg, it allows for a more precise function and stability. All adjustments including spring preload are made at the top cap.
The cartridge system fits into the original front fork, springs have to be ordered individually - please follow our recommendations regarding spring rates in relation to rider's weight.
Part number
FKS 204
Type Code
NIX 22
Technical data
| Position: | front |
|---|---|
| Spring series: | 08429-Serie |
| Recommended oil: | 01309 |
| Packaging unit: | pair |
Notes
Springs are not included in the kit and have to be ordered individually.
It is recommended to contact an ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha MT-07 (2014 – 2020)
- Teilegutachten (Germany)
Yamaha Tracer 700 (2016 – 2019)
- Teilegutachten (Germany)
Yamaha XSR700 (2016 – 2020)
- Teilegutachten (Germany)
Download
- Mounting Instructions FKS 204 English (760,1 KB)
- Owners Manual FKS 200 Cartridge Kit English (1.116,1 KB)
- Mounting Instructions FKS 204 German (790,3 KB)
- Owners Manual FKS 200 Cartridge Kit German (1.275,7 KB)
Öhlins Front Fork Spring Kit FSK 169 for Yamaha R15/M Top cap & Spring KIT 2017-2022
This upgrade kit for front forks contains front fork springs as well as for some Bikes top caps with spring preload adjuster that adds additional function and performance to the standard fork (please see Mounting Instruction if the topcaps are adjustable or not).
Part number
FSK 169
Technical data
| Rate N/mm: | 8,0 N/mm |
|---|---|
| Mounted spring: | 68007-80 |
| Spring series: | 68007-XX |
| Packaging unit: | kit |
Notes
Non-adjustable preload top cap. Internal preload spacers and top cap tool supplied with the kit.
Fits for vehicles
Yamaha R15/M (2017-2022)
- ABE (Germany)
Öhlins NIX 30 Cartridge Kit FGK 239
The Öhlins NIX 30 front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The Öhlins cartridge kit has a unique design with compression damping and the adjustment on the left leg and rebound damping and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload! The cartridge kit system fits bolt on in most standard hyper sport front forks.
The Öhlins cartridge system fits into the original front fork, springs have to be ordered individually. Please follow our recommendations regarding spring rates and oil in relation to rider's weight and preference listed in the specific cartridge kit's mounting instruction.
Part number
FGK 239
Technical data
| Length: | 743mm mm |
|---|---|
| Stroke: | 120mm mm |
| Spring series: | 08790-Serie |
| Recommended oil: | 01309 |
| Packaging unit: | pair |
Notes
Front fork springs needs to be ordered separately with order no 08790-xx (xx=code for spring rate).
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha YZF-R1 (2020 – 2021)
- ABE (Germany)
Öhlins NIX 30 Cartridge Kit FGK 243
The Öhlins NIX 30 front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The Öhlins cartridge kit has a unique design with compression damping and the adjustment on the left leg and rebound damping and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload! The cartridge kit system fits bolt on in most standard hyper sport front forks.
The Öhlins cartridge system fits into the original front fork, springs have to be ordered individually. Please follow our recommendations regarding spring rates and oil in relation to rider's weight and preference listed in the specific cartridge kit's mounting instruction.
Part number
FGK 243
Type Code
30mm Cartridge Kit R&T
Technical data
| Length: | 728 mm |
|---|---|
| Stroke: | 120 mm |
| Position: | front |
| Spring series: | 08790-Serie |
| Recommended oil: | 01309 |
| Packaging unit: | kit |
Notes
It is recommended to contact an authorized ÖHLINS Service Center for installation.
Fits for vehicles
Aprilia RS 660 (2021)
- "ABE" in preparation (Germany)
Download
Never mind the outside ... it's the inside that counts. True for the MX cartridge kit with the powerful TTX-technology.
The same damping system technology, found in our Öhlins front forks, is also available as replacement cartridge kits for your standard front forks. Reduce bottom outs simply by installing the kits straight into your bike’s front forks, while also improving stability, hold-up, higher definition front wheel feedback, settled movement, and ability to handle bigger impacts. When you take on the track, we want you to experience a ride out of the ordinary.
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Carbon Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit with this bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
Öhlins FGR 250 USD Front Fork Racing FGR 252 Yamaha R1 / R6 2015-2022
Part number
FGR 252
Type Code
Front Fork R&T
T
Twin tube
Technical data
| Length: | 745 mm |
|---|---|
| Stroke: | 120 mm |
| Rate N/mm: | 10,0 N/mm |
| Position: | front |
| Mounted spring: | 04744-10 |
| Spring series: | 04744-Serie |
| Recommended oil: | 01309-01 |
| Oil level mm: | 190 |
| Packaging unit: | pair |
Fits for vehicles
Yamaha MT-10 (2016 – 2022)
- Racing product, not for use on public roads
Yamaha YZF-R1 (2015 – 2022)
- Racing product, not for use on public roads
Yamaha YZF-R1M (2015 – 2022)
- Racing product, not for use on public roads
Yamaha YZF-R6 (2017 – 2022)
- Racing product, not for use on public roads
FGRT Upside Down Front Fork Road & Track FGRT 219
It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The new Road & Track front fork will give you loads of performance, stable damping and fantastic comfort. The new Road & Track front fork features the Öhlins 30 mm Cartridge Kit inside, a winning kit in several national superbike championships.
Compression and rebound adjustments are easily done with compression adjustment in one leg and rebound
adjustment in the other leg. The new front fork gives a big improvement in tire feel, brake support and the general handling of the bike. The outer design has been redesigned to make this front fork even more attractive.
Part number
FGRT 219
Type Code
FG43
30
Piston diameter: 30 mm
Technical data
| Length: | 745 mm |
|---|---|
| Stroke: | 120 mm |
| Rate N/mm: | 10,0 N/mm |
| Position: | front |
| Mounted spring: | 04744-10 |
| Spring series: | 04744-Serie |
| Packaging unit: | pair |
Fits for vehicles
Yamaha MT-10 (2016)
- ABE (Germany)
Yamaha MT-10 (2017 – 2020)
- "ABE" in preparation (Germany)
Yamaha YZF-R1 (2015 – 2016)
- ABE (Germany)
Yamaha YZF-R1 (2017 – 2020)
- "ABE" in preparation (Germany)
Yamaha YZF-R1M (2014 – 2016)
- ABE (Germany)
- Attention! The function of the electronically controlled suspension gets lost!
Yamaha YZF-R1M (2017 – 2020)
- "ABE" in preparation (Germany)
- Attention! The function of the electronically controlled suspension gets lost!
Yamaha YZF-R6 (2017 – 2020)
- "ABE" in preparation (Germany)
Download
- Mounting Instructions FGRT 219 English (443,2 KB)
- Owner´s Manual Front Fork FGRT Series Road & Track English (1.895,5 KB)
- Mounting Instructions FGRT 219 German (419,3 KB)
- Owner´s Manual Front Fork FGRT Series Road & Track German (1.352,0 KB)
Features
Öhlins FGRT Upside Down Front Fork Road & Track FGRT 237
It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The new Road & Track front fork will give you loads of performance, stable damping and fantastic comfort. The new Road & Track front fork features the Öhlins 30 mm Cartridge Kit inside, a winning kit in several national superbike championships.
Compression and rebound adjustments are easily done with compression adjustment in one leg and rebound
adjustment in the other leg. The new front fork gives a big improvement in tire feel, brake support and the general handling of the bike. The outer design has been redesigned to make this front fork even more attractive.
Part number
FGRT 237
Type Code
Front Fork R&T
Technical data
| Length: | 740 mm |
|---|---|
| Stroke: | 120 mm |
| Rate N/mm: | 10,5 N/mm |
| Position: | front |
| Mounted spring: | 04744-05 |
| Spring series: | 04744-Serie |
| Oil level mm: | 150 mm |
Fits for vehicles
Kawasaki Ninja ZX-10R (2021)
- "ABE" in preparation (Germany)
Kawasaki Ninja ZX-10RR (2021)
- "ABE" in preparation (Germany)
Download
- Mounting Instruction Öhlins Motorcycle FGRT 231 (English) (486,1 KB)
- Owner´s Manual Öhlins Motorcycle Front Fork FGRT Series Road Track (English) (1.895,5 KB)
- Mounting Instruction Öhlins Motorcycle FGRT 231 (German) (510,0 KB)
- Owner´s Manual Öhlins Motorcycle Front Fork FGRT Series Road Track (German) (1.352,0 KB)
Öhlins Upside Down Front Fork Road & Track FGRT 236 for Honda CBR1000RR-R 2020-2022
It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The new Road & Track front fork will give you loads of performance, stable damping and fantastic comfort. The new Road & Track front fork features the Öhlins 30 mm Cartridge Kit inside, a winning kit in several national superbike championships.
Compression and rebound adjustments are easily done with compression adjustment in one leg and rebound
adjustment in the other leg. The new front fork gives a big improvement in tire feel, brake support and the general handling of the bike. The outer design has been redesigned to make this front fork even more attractive.
Part number
FGRT 236
Type Code
FG43
30
Piston diameter: 30 mm
Technical data
| Length: | 755 mm |
|---|---|
| Stroke: | 125 mm |
| Rate N/mm: | 10,0 N/mm |
| Position: | front |
| Mounted spring: | 04744-10 |
| Spring series: | 04744-Serie |
| Packaging unit: | pair |
Fits for vehicles
Honda CBR1000RR-R (2020 – 2022)
- "Teilegutachten" in preparation (Germany)
Öhlins STX 46 Supersport Shock Absorber AP 660
Part number
AP 660
Type Code
S46HR1C1L
S
Single tube
46
Piston diameter: 46 mm
H
Monotube high pressure gas type of shock absorber with hose mounted external reservoir.
R1
Adjustable rebound damping on single tube shocks. Adjuster wheel above the end eye.
C1
Adjustable compression damping. Adjuster wheel or slot on the reservoir.
L
Adjustable length.
Technical data
| Length: | 309 +0,5/-5,5 mm |
|---|---|
| Stroke: | 51 mm |
| Rate N/mm: | 160 N/mm |
| Position: | rear |
| Mounted spring: | 01093-64 |
| Packaging unit: | pieces |
Fits for vehicles
Aprilia RS 660 (2021)
- "ABE" in preparation (Germany)
Aprilia Tuono 660 (2021)
- "ABE" in preparation (Germany)
Download
Indulge in top performance and exclusive design with Blackline by Öhlins STX 46 shock absorber. Never choose between a timeless look and outstanding features. Öhlins STX 46 Blackline shock absorber blends into your own creation but still pops out to draw attention. Because, let’s be honest, looking good is a part of your identity. Take on the streets with style, class, and confidence while riding your way to the goal. Less is more, and the Blackline by Öhlins will never go out of style. Ride timeless, experience perfect.
Öhlins STX 46 Blackline Shock Absorber BM 495
Part number
BM 495
Type Code
S46DR1L
S
Single tube
46
Piston diameter: 46 mm
D
Monotube high pressure gas type of shock absorber with internal reservoir in the main body.
R1
Adjustable rebound damping on single tube shocks. Adjuster wheel above the end eye.
L
Adjustable length.
Technical data
| Length: | 374.5mm +10/-2 mm |
|---|---|
| Stroke: | 53.5 mm |
| Rate N/mm: | 140 N/mm |
| Position: | rear |
| Mounted spring: | 21102-54 |
| Spring series: | 21102 |
| Mounting length min/max: | 372.5/384.5 |
| Packaging unit: | pieces |
Fits for vehicles
BMW R nineT Scrambler (2021)
- "ABE" in preparation (Germany)
BMW R nineT Urban G/S (2021)
- "ABE" in preparation (Germany)
Öhlins STX 46 Street Shock Absorber BM 642
Öhlins well proven STX 46 Street series is the perfect upgrade for sportive street bikes. This high-pressure gas type shock absorber comes with an internal gas reservoir and with a 46 mm main piston. Depending on the application the shock absorber features a mechanic or a hydraulic preload adjustment as well as adjustable rebound damping.
Part number
BM 642
Type Code
S46DR1LB
S
Single tube
46
Piston diameter: 46 mm
D
Monotube high pressure gas type of shock absorber with internal reservoir in the main body.
R1
Adjustable rebound damping on single tube shocks. Adjuster wheel above the end eye.
L
Adjustable length.
B
Integrated hydraulic spring preload adjuster. Adjuster wheel or hexagon on the adjuster.
Technical data
| Length: | 374 +10mm mm |
|---|---|
| Stroke: | 52mm mm |
| Rate N/mm: | 140 N/mm |
| Mounted spring: | 21102-54 |
Fits for vehicles
BMW R nineT Scrambler (2021 – 2022)
- "ABE" in preparation (Germany)
BMW R nineT Urban G/S (2021 – 2022)
- "ABE" in preparation (Germany)
Öhlins STX 46 Street Shock Absorber BM 643
Öhlins well proven STX 46 Street series is the perfect upgrade for sportive street bikes. This high-pressure gas type shock absorber comes with an internal gas reservoir and with a 46 mm main piston. Depending on the application the shock absorber features a mechanic or a hydraulic preload adjustment as well as adjustable rebound damping.
Part number
BM 643
Type Code
S46DR1L
S
Single tube
46
Piston diameter: 46 mm
D
Monotube high pressure gas type of shock absorber with internal reservoir in the main body.
R1
Adjustable rebound damping on single tube shocks. Adjuster wheel above the end eye.
L
Adjustable length.
Technical data
| Length: | 374 +12/-0 mm |
|---|---|
| Stroke: | 52mm mm |
| Rate N/mm: | 140 N/mm |
| Mounted spring: | 21102-54 |
Fits for vehicles
BMW R nineT Scrambler (2021 – 2022)
- "ABE" in preparation (Germany)
BMW R nineT Urban G/S (2021 – 2022)
- "ABE" in preparation (Germany)
Öhlins STX 46 Street Shock Absorber BM 653
Öhlins well proven STX 46 Street series is the perfect upgrade for sportive street bikes. This high-pressure gas type shock absorber comes with an internal gas reservoir and with a 46 mm main piston. Depending on the application the shock absorber features a mechanic or a hydraulic preload adjustment as well as adjustable rebound damping.
Part number
BM 653
Type Code
S46DR1LB
S
Single tube
46
Piston diameter: 46 mm
D
Monotube high pressure gas type of shock absorber with internal reservoir in the main body.
R1
Adjustable rebound damping on single tube shocks. Adjuster wheel above the end eye.
L
Adjustable length.
Technical data
| Length: | 368mm +10/-0 mm |
|---|---|
| Stroke: | 46mm mm |
| Position: | rear |
| Mounted spring: | 01093-64 |
Fits for vehicles
BMW R nineT (2021 – 2022)
- "ABE" in preparation (Germany)
BMW R nineT Pure (2021 – 2022)
- "ABE" in preparation (Germany)
Öhlins STX 46 Street Shock Absorber BM 654
Öhlins well proven STX 46 Street series is the perfect upgrade for sportive street bikes. This high-pressure gas type shock absorber comes with an internal gas reservoir and with a 46 mm main piston. Depending on the application the shock absorber features a mechanic or a hydraulic preload adjustment as well as adjustable rebound damping.
Part number
BM 654
Type Code
S46DR1L
S
Single tube
46
Piston diameter: 46 mm
D
Monotube high pressure gas type of shock absorber with internal reservoir in the main body.
R1
Adjustable rebound damping on single tube shocks. Adjuster wheel above the end eye.
L
Adjustable length.
Technical data
| Length: | 368mm +12/-0 mm |
|---|---|
| Stroke: | 46mm mm |
| Position: | rear |
| Mounted spring: | 21102-64 |
Fits for vehicles
BMW R nineT (2021 – 2022)
- "ABE" in preparation (Germany)
BMW R nineT Pure (2021 – 2022)
- "ABE" in preparation (Germany)
TTX GP Shock Absorber AP 468
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.
We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!
Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
AP 468
Type Code
T36PR1C1LB
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
B
Integrated hydraulic spring preload adjuster. Adjuster wheel or hexagon on the adjuster.
Technical data
| Position: | rear |
|---|---|
| Packaging unit: | pieces |
Fits for vehicles
Download
- Mounting Instruction Öhlins Motorcycle AP 468 (English) (317,8 KB)
- Owner´s Manual Öhlins Motorcycle TTX GP shock absorber Road Track (English) (1.970,2 KB)
- Mounting Instruction Öhlins Motorcycle AP 468 (German) (306,4 KB)
- Owner´s Manual Öhlins Motorcycle TTX GP shock absorber Road Track (German) (3.112,6 KB)
Öhlins TTX GP Shock Absorber BM 569
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance. We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork! Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
BM 569
Type Code
T36PR1C1LB
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
L
Adjustable length.
B
Integrated hydraulic spring preload adjuster. Adjuster wheel or hexagon on the adjuster.
Technical data
| Length: | 369 +2/-10 mm |
|---|---|
| Stroke: | 80 mm |
| Rate N/mm: | 54 N/mm |
| Position: | rear |
| Mounted spring: | 01096-11 |
| Spring series: | 01096-xx |
| Packaging unit: | pieces |
Fits for vehicles
BMW M 1000 RR (2021)
- "ABE" in preparation (Germany)
TTX RT Shock Absorber BM 146
Cavitation. Something you don’t want in your shock absorber. It’s devastating because basically it means the damping is lost. Small bubbles in the oil can never create the necessary damping forces. Traditional dampers working in extreme conditions sometimes suffers from low pressure on the piston backside.
The TTX was created by Öhlins engineers to eliminate the risk for cavitation. They succeeded. With the TTX technology a positive pressure balance is created in the shock which means the risk for cavitation is gone.
TTX stands for Twin Tube with the X illustrating how the flow through the valves in the cylinder head is designed. Thanks to the twin tube technology the pressure usually created on top of the piston is transferred through the cylinder head and the adjusters for compression and rebound, then flows through the space between the inner and outer tube to the other side of the solid piston.
These equals to a pressure balance within the shock. The outer reservoir is only used to take care of the oil displacement from the piston rod and heat expansion, which is why it can be fairly small in design. Inside the reservoir there is a dividing piston between the oil and the nitrogen gas.
Part number
BM 146
Type Code
T39PR1C1S
T
Twin tube
39
Piston diameter: 39 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
S
Hose mounted hydraulic spring preload adjuster.
Technical data
| Length: | 402.5 mm |
|---|---|
| Stroke: | 75 mm |
| Rate N/mm: | 140 N/mm |
| Position: | rear |
| Mounted spring: | 01103-54 |
| Packaging unit: | pieces |
Notes
ESA version can get warning light in display, this does not affect bikes performance.
Fits for vehicles
BMW R 1200 GS (2013 – 2016)
- Teilegutachten (Germany)
BMW R 1200 GS (2017 – 2018)
- Teilegutachten (Germany)
BMW R 1250 GS (2019 – )
- Teilegutachten (Germany)
Download
- Mounting Instruction Öhlins Motorcycle BM 146 (English) (521,4 KB)
- Owner´s Manual Öhlins Motorcycle TTX shock absorber Road Track (English) (1.407,4 KB)
- Mounting Instruction Öhlins Motorcycle BM 146 (German) (909,6 KB)
- Owner´s Manual Öhlins Motorcycle TTX shock absorber Road Track (German) (1.599,7 KB)
TTX RT Shock Absorber BM 147
Cavitation. Something you don’t want in your shock absorber. It’s devastating because basically it means the damping is lost. Small bubbles in the oil can never create the necessary damping forces. Traditional dampers working in extreme conditions sometimes suffers from low pressure on the piston backside.
The TTX was created by Öhlins engineers to eliminate the risk for cavitation. They succeeded. With the TTX technology a positive pressure balance is created in the shock which means the risk for cavitation is gone.
TTX stands for Twin Tube with the X illustrating how the flow through the valves in the cylinder head is designed. Thanks to the twin tube technology the pressure usually created on top of the piston is transferred through the cylinder head and the adjusters for compression and rebound, then flows through the space between the inner and outer tube to the other side of the solid piston.
These equals to a pressure balance within the shock. The outer reservoir is only used to take care of the oil displacement from the piston rod and heat expansion, which is why it can be fairly small in design. Inside the reservoir there is a dividing piston between the oil and the nitrogen gas.
Part number
BM 147
Type Code
T36PR1C1
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
Technical data
| Length: | 392 mm |
|---|---|
| Stroke: | 88.5 mm |
| Rate N/mm: | 56 N/mm |
| Position: | front |
| Mounted spring: | 21067-12 |
| Packaging unit: | pieces |
Notes
ESA version can get warning light in display, this does not affect bikes performance.
Fits for vehicles
BMW R 1200 GS (2013 – 2018)
- ABE (Germany)
BMW R 1250 GS (2019 – )
- Without "Teilegutachten" (Germany)
Download
- Mounting Instruction Öhlins Motorcycle BM 147 (English) (478,1 KB)
- Owner´s Manual Öhlins Motorcycle TTX shock absorber Road Track (English) (1.407,4 KB)
- Mounting Instruction Öhlins Motorcycle BM 147 (German) (872,1 KB)
- Owner´s Manual Öhlins Motorcycle TTX shock absorber Road Track (German) (1.599,7 KB)