HHR Performance » 2021

Description: Alpha Racing Cylinder head gasket 0,97 mm BMW S1000RR 2019- and M1000RR 2021- 1112B045A00

Cylinder head gasket 0,97 mm, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), 3-layered, coated

Description: Alpha Racing Dashboard and fairing carrier, Motec dashboard BMW M1000RR 2021 4663DA00804

Dashboard and fairing carrier for Motec C125 dashboard, for BMW M 1000 RR 2021- (K66), aluminium, black anodised, multipiece screwed

Description: Alpha Racing Foam cube kit, OEM fuel tank BMW HP4 2012-2014, BMW S1000RR 2009-2011,BMW S1000RR 2015-2019- and BMW M1000RR 2021- 1611A047B00

Fuel tank foam kit, for BMW Superbike models, 65 cubes à 5x5x5 cm, tailored for BMW OEM fuel tank

Description: Alpha Racing Front stand aluminium, black BMW HP4 2012-2014, BMW S1000 XR 2015- 2016, BMW S1000 R 2014-2016, BMW S1000 RR 2009-2019- and BMW M1000 RR 2021- 8123A001A01

Front stand aluminium, black anodized, pick-up inside the holes of the fork bottoms, adjustable cursors, with BMW emblem

Description: Alpha Racing OZ wheel set Cattiva RS-A BMW S1000RR 2020+ 3631B003A00

OZ Motorbike racing wheel set Cattiva RS-A V2 3,5"/6,00"x17", for BMW S 1000 RR 2020- (K67), forged aluminium wheels, 6 spokes, black matt anodized, incl. sprocket carrier

Description: Alpha Racing PVM front wheel 3V Design BMW S 1000 RR 2019- 3631B300A01

The 3V Racing wheel by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.

PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.

Features:
- Aluminum Racing forged wheel
- 6-spoke design
- anodized, titanium colored
- for OEM and racing brake discs
- incl. 90° angle valve
- Rim anti-slip coated

Please note:
- Racing wheel, only for professional race track use.

Weight: 2.96 kg

Comparative values:
BMW OEM forged wheel: 3.14 / 4.42 kg (front/rear, without valves)
BMW OEM carbon wheel: 2.50 / 3.30 kg (front/rear, without valves)

Description: Alpha Racing PVM rear wheel 3V Design BMW S 1000 RR 2019- 3631B300A02

The 3V Racing wheel by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.

PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.

Features:
- Aluminum Racing forged wheel
- 6-spoke design
- anodized, titanium colored
- for OEM and racing brake discs
- incl. 90° angle valve
- Rim anti-slip coated

Please note:
- Racing wheel, only for professional race track use.
- Sprocket with inner diameter 76 mm required.

Weight: 4.00 kg

Comparative values:
BMW OEM forged wheel: 3.14 / 4.42 kg (front/rear, without valves)
BMW OEM carbon wheel: 2.50 / 3.30 kg (front/rear, without valves)

Description: Alpha Racing PVM wheel set 3V Design, BMW M 1000 RR 2021- 3631B400A00

The 3V Racing wheel set by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.

PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.

Features:
- Aluminum Racing forged wheel set
- 6-spoke design
- anodized, titanium colored
- incl. sprocket carrier
- for OEM and racing brake discs (front/rear)
- incl. 90° angle valves
- front and rear wheel rim anti-slip coated

Please note:
- Racing wheel set, only for professional race track use.
- Sprocket with inner diameter 76 mm required.

Weight: 7.62 kg
Front wheel 2.96 kg
Rear wheel 4.00 kg
Sprocket carrier 0.66 kg

Comparative values:
BMW OEM carbon wheel: 2.5 / 3.3 kg (front/rear, without valves)

Description: Alpha Racing Racing rear brake line BMW S1000 RR 2019- 3432B005A00

Racing rear brake line, for racing rearset, for BMW S 1000 RR 2019- (K67), one-piece

Description: Alpha Racing Racing rearset SBK 2019-2021 BMW S1000RR & 2021 BMW M1000R 4670-B210-003

Racing rearset SBK, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), to be used with inverted or standard shift pattern, multiple adjustments possible, racing only

Description: Carbonin Aluminum Dashboard Holder 2021 Honda CBR1000RR-R ALU2001H
-Does not include Required Airtube in Carbon Fiber CH20064 or Avio Fiber H20064AF

Description: Carbonin Aluminum Inserts for Tail Unit (4 pcs) 2021 Honda CBR1000RR-R ALU2002H
-Required for fitment of Carbonin 2021 Honda CBR1000RR-R Tail Unit in carbon fiber CH20300 or avio fiber H20300AF

Description: Carbonin Avio Fiber Airbox Cover with Side Panels 2021 Honda CBR1000RR-R H20425AF
-will not fit with other brands or with your OEM tail unit
-Required for fitment with Carbonin 2021 Honda CBR1000RR-R tail unit in Carbon Fiber CH20300 or Avio Fiber H20300AF due to the mounting design
-Does not include Required Brackets for Airbox Cover (2 pcs) IN2001H

Description: R1 seat for Carbonin bodywork


Pictures are shown for reference only and may not accurately represent the exact model of your seat

Description: Carbonin Avio Fiber Front Fender Yamaha 17-20 R6, 15-20 R1

Description: Replacement Left side Fairing For Carbonin complete fairing, will not fit with other brands or OEM

Description: R1 seat for Carbonin bodywork long version covers the back of the tail

Picture is of a Customer Customers seat and is an example to show you the embroidery.
You can supply a logo or we can embroider your Name or Number on your seat. additional logos are $50 please contact us arrange an extra logo

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)

The 2017-2021 GSXR1000 Bodywork requires the following bracketry for fitment:
Aluminum CNC Inserts Side Panels (ALU1202S)
Inox Holders for Lower Fairing (IN1202S)

The The 2017-2021 GSXR1000 Bodywork also will require 1 of the 2 following tail unit inserts:
Aluminum CNC Tail Inserts Quick Release (Quick Release Bracket w/ DZUS) (ALU1204SCNC)
Aluminum CNC Tail Inserts Bolt On (Hard Mount w/ Bolt) (ALU1204SR)

There are 3 seat options available.
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit Carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.

Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!

Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order

Carbonin Tail unit will not work with OEM Seat.

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing designed for H20 Oversized radiator
• Left Side Panel (3 Dzus) designed for H20 Oversized radiator
• Right Side Panel (3 Dzus) designed for H20 Oversized radiator
• Single Race Tail (4 Pcs)

Description: Replacement winglet for carbonin tail unit

Description: R1 seat for Carbonin bodywork long version covers the back of the tail

Pictures are shown for reference only and may not accurately represent the exact model of your seat

Description: R1 seat for Carbonin bodywork long version covers the back of the tail

Pictures are shown for reference only and may not accurately represent the exact model of your seat

Description: Lightweight Carbon fender Oem Replacement

Description: Lightweight Carbon fender Oem Replacement

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel for Big Radiator (3 Dzus)
• Right Side Panel for Big Radiator (3 Dzus)
• Single Race Tail (4 Pcs)

Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order

Description: Replacement Lower Fairing with kit stand cut out

Description: R1 seat for Carbonin bodywork

Pictures are shown for reference only and may not accurately represent the exact model of your seat

Description: R1 seat for Carbonin bodywork

Pictures are shown for reference only and may not accurately represent the exact model of your seat

Description: Extreme Components GP EVO REAR SETS KIT FOR APRILIA RS660 / TUONO 660 (2020/2022) (STANDARD AND REVERSE SHIFTING) WITH ALUMINIUM HEEL GUARD (BLACK) PED-GP EVO RS660
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO Rearsets Kit STD And Reverse Shifting Carbon Fiber Black Heel (FOR AKRAPOVIC RACING FULL SYSTEM) YAMAHA R1 (2020/2022) PED-GP EVO R1C AK
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO Rearsets Kit STD And Reverse Shifting Carbon Fiber Black Heel APRILIA RS660 / TUONO 660 (2020/2022) PED-GP EVO RS660 C
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO Rearsets Kit STD And Reverse Shifting Carbon Fiber Silver Heel (SHIFT ROD FOR STANDARD SHIFTING, NO QUICKSHIFTER) SUZUKI GSXR 1000 (2017/2022) PED-GP EVO GSXR1000B S
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO rear sets kit for BMW S1000RR (2019/2020) (standard and reverse shifting) with aluminium heel guard (black) - PED-GP EVO S1000RR 19
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO rear sets kit for BMW S1000RR (2019/2020) (standard and reverse shifting) with carbon fiber heel guard (black) - PED-GP EVO S1000RR 19C
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO rear sets kit for Yamaha R1 (2015/2020) (standard and reverse shifting) with aluminium heel guard (black) - PED-GP EVO R1
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO rear sets kit for Yamaha R7 (standard and reverse shifting) Black Aluminum with Black with Carbon heel guards (photo depicting this option is for color reference only, only the silver show the exact model for the R7) Plug and play. Works with ABS, side stand and OEM rear brake light
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO rear sets kit for Yamaha R7 (standard and reverse shifting) with carbon fiber heel guard (silver) Plug and play. Works with ABS, side stand and OEM rear brake light
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Welcome to the latest development in superbike suspension, introducing the high side saving OVERSUSPENSION from Supreme Technology based in Italy. As seen on the WSBK Barni Racing Ducati V4!

This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.

Description: Welcome to the latest development in superbike suspension, introducing the high side saving OVERSUSPENSION from Supreme Technology based in Italy. As seen on the WSBK Barni Racing Ducati V4!

This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.

Description: Welcome to the latest development in superbike suspension, introducing the high side saving OVERSUSPENSION from Supreme Technology based in Italy. As seen on the WSBK Barni Racing Ducati V4!

This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.