Description:

Description: Carbonin Carbon Fiber Race Bodywork (11 pcs w/ 12 Dzus) 2021 Honda CBR1000RR-R
-Will not fit other brands of bodywork
-Created with BSB Team Honda Racing UK
-Dzus are pre-installed, riveted
-Fairings are pre-fitted

Race Bodywork includes:
Upper Race Fairing (4 dzus)
Lower Fairing (4 dzus)
Left Side Panel (2 dzus)
Left Side Panel Wing Cover
Left Side Panel Inner Wing
Right Side Panel (2 dzus)
Right Side Panel Wing Cover
Right Side Panel inner Wing
Tail Unit (2 pcs)
Airbox Cover w/ Side Panels

Brackets Required, but not included with bodywork:
Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
Inox Bracket for Lower Fairing (1 pc) IN2002H
Inox Brackets for Airbox Cover w/ Side Panels (2 pcs) IN2001H

Front fender is optional and not included with Race bodywork.

Seat Foams are optional and not included with Race Bodywork.

Description: Carbonin Avio Fiber Upper Race Fairing (4 Dzus) 2021 Honda CBR1000RR-R H20210AF
Replacement Upper Fairing For Carbonin complete fairing kit, will not fit with other brands

Description: Carbonin Carbon Fiber Airbox Cover with Side Panels 2021 Honda CBR1000RR-R CH20425
-will not fit with other brands
-Required for fitment with Carbonin 2021 Honda CBR1000RR-R tail unit in Carbon Fiber CH20300 or Avio Fiber H20300AF
-Does not include Required Brackets for Airbox Cover (2 pcs) IN2001H

Description: Carbonin Carbon Fiber Frame Protectors 2021 Honda CBR1000RR-R CH20050
-For Install Use prep frame with rubbing alcohol and use HQ silicone sparingly and let dry over night with clamped down with zip ties.

Description: Carbonin Carbon Fiber Rear Fender 2021 Honda CBR1000RR-R CH20020
-OEM Replacement

Description: Carbonin Carbon Fiber Upper Race Fairing (4 Dzus) 2021 Honda CBR1000RR-R CH20210
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands

Description: Carbonin Pro Seat Unit Long 2021 Honda CBR1000RR-R FM260HL
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.

Long seats have a lip that comes up the tail units cowl

Pro Seat Long - This Customizable seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat padding and add your own logo. Please note pro seats are made to order. We will contact you after the order is processed to go thru the creative design process.

Description: Carbonin Standard Seat Unit Short 2021 Honda CBR1000RR-R FM2050HS
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.

Standard Short - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more. Comes with standard red Carbonin embroidered logo.

Description: Carbonin Avio Fiber Airbox Cover with Side Panels 2021 Honda CBR1000RR-R H20425AF
-will not fit with other brands or with your OEM tail unit
-Required for fitment with Carbonin 2021 Honda CBR1000RR-R tail unit in Carbon Fiber CH20300 or Avio Fiber H20300AF due to the mounting design
-Does not include Required Brackets for Airbox Cover (2 pcs) IN2001H

Description: Carbon fiber exhaust hanger/muffler bracket

Description: Slip-On Line (Titanium) Track Day
S-H10SO25-APLT/TD
power
+2.1 kW
at 13300 rpm
torque
+3.4 Nm
at 3700 rpm

Description: Bonamici Racing Blocks Mirror For Honda CBR 1000 RR Fireblade / RR-R  2017 - 2023 BM05

Bonamici Mirror Block are used to clean up the mirror blank holes left after removing for a bar end mirror conversion or full on track day build. Very easy to install with just two bolts. CNC machined from billet aluminum and black anodized for longevity. Sold as sets being left and right. Bonamici Racing is an Italian manufacturer of high-quality CNC machined racing products. All products are designed and manufactured in Italy with respect to the Italian race heritage; where racing is not an obsession but a way of life! Bonamici works with several top teams around the world competing in the likes of Moto3, WorldSBK, MotoE, British Superbike, and World SSP. Only the best technologies available are used for manufacturing where their high level of quality control is made constant. This direct feedback and high quality translate directly onto the track for the best results possible.

Description: Bonamici Racing Engine Protection Right Side (Clutch) For Honda CBR 1000RR-R Fireblade 2020 - 2023 CP098

Worried about dropping your Honda whether it be on the Track or Road and damaging your engine? Bonamici Racing completely understand the risks involved of riding an expensive superbike and they have developed their range of Engine Protectors to help mitigate any damage done to your engine in the event of an accident. These Engine Protectors are manufactured from Billet Aluminium in their factory based in the heart of Italy and is treated to a black surface anodised finish to help improve corrosion resistance and durability. Whatever bike you ride, you can rest assured these Engine Protectors will save yourself from a costly repair bill! Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment and compatibility, after this their parts are fine tuned, tested and validated through various levels of Motorsport.
No glue is needed!
High end quality made in Italy

Description: Item Summary

Brembo Part# 107A48624

Brake Pad Set, Z03 M56 8 Z03 for Nissin Calipers, CBR1000RR-R, BMW M1000RR

Description:

19 RCS Corsa Corta, Long Lever, Radial, Front

The Brembo radial master cylinder with 6 different brake modulation options. The 19RCS CORSA CORTA is characterized by the possibility it provides the rider to adapt the braking "bite point" to the desired riding feeling, in addition to the RCS (Ratio Click System), introduced 10 years ago on the Brembo 19RCS radial brake master cylinder, which allows the center distance of the master cylinder to be adjusted to "18" or "20".
The meticulous study to improve the master cylinder has allowed Brembo to propose three brake master cylinders in one and to further improve braking system performance. Furthermore, taking advantage of the mixture stemming from the 18 to 20 center distance and the three maps - R,S,N - no less than 6 different combinations can be attained.
The play selector lets the rider choose between the three different available feeling maps. With the Normal map, the bite point position is such to guarantee a more gradual initial phase and is therefore suitable for city riding or braking in poor grip conditions. With the Sport map, the bite point position is such to shorten the initial phase compared to the N setting. This second map allows for a more dynamic response and a sportier riding style.
Lastly, with the Race map, the eccentric device allows the initial phase to be shortened even more, taking it to a minimum value at the same level as the master cylinders used in MotoGP: this way, the rider is able to reach the braking bite point at lighting fast speeds. This third map is ideal for a racing riding style that shaves off precious hundredths of a second in braking.
The RCS system (Ratio Click System), on the other hand, shifts the distance between the fulcrum point and the point of application on the master cylinder push rod by 2 millimeters: this results in a different distribution of the braking force without it being modified in terms of pure power.
The master cylinder body is made of forge aluminum alloy, machined with 5-axis CAM technology. A hard oxide coating is used for the surface finish, which guarantees that the master cylinder main body is highly resistant to wear and its components move easily. The floating piston and the seals derive directly from those used in MotoGP, as do the housings for the bleeding and fueling systems, which are inclined by more than 30° to make bleeding the master cylinder easier. A study was conducted for the design of the 19RCS CORSA CORTA in order to find consistency of style between all the components of the master cylinder, which now has a distinct, dynamic and sporty look in line with the style of the bikes for which it was conceived (model or design filed simultaneously with the filing of the patent on the technological solution). The lever assembly can be replaced without disassembling the RCS system (Ratio Click System) from the master cylinder and this allows the calibrations made in the installation phase to be maintained unaltered.

Description: Carbonin Avio Fiberglass Front Fender.
-Direct OEM replacement.

Description: Carbonin Avio Fiber Lower Fairing (4 Dzus) 2021 Honda CBR1000RR-R H20220Af
Replacement lower fairing, These are not designed to fit with any other brands

Description: Carbonin Avio Fiber Right Side Panel (2Dzus) 2021 Honda CBR1000RR-R H20232AF, will not fit with other brands.
-Does not include Required Carbonin Right Side Wing Cover 20238AF
-Does not include Required Carbonin Right Side Inner Wing 20239AF