HHR Performance » 2023, Honda

Description: Rotobox BOOST Front Wheel For HD Pan America 1250


The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 180 kg / 400 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!

Description: Carbonin Carbon Fiber Fuel Tank Extension 2021 Honda CBR1000RR-R CH20405
-Attaches with 3M double sided tape
-Better Ergonomics for mid-turn handling and under hard braking
-Protects gas tank and also covers existing damage.

Description: Carbonin Basic Seat Unit Long 2021 Honda CBR1000RR-R FM2010HL
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.

Basic Long - This seat is a seat foam unit glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad. This is the long version which has a lip that comes up the rear of the tail cowl.

Description: Carbonin Basic Seat Unit Short 2021 Honda CBR1000RR-R FM2010HS
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.

Basic Short - This seat is a seat foam unit glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.

Description: Carbonin Inox Brackets for Airbox Cover (2 pcs) 2021 Honda CBR1000RR-R IN2001H
-Required for fitment of Carbonin 2021 Honda CBR1000RR-R Airbox Cover in Carbon Fiber CH20425 or Avio Fiber H20245AF

Description: Carbonin Pro Seat Unit Long 2021 Honda CBR1000RR-R FM260HL
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.

Long seats have a lip that comes up the tail units cowl

Pro Seat Long - This Customizable seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat padding and add your own logo. Please note pro seats are made to order. We will contact you after the order is processed to go thru the creative design process.

Description: Carbonin Standard Seat Unit Long 2021 Honda CBR1000RR-R FM2050HL
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.

Long seats have a lip that comes up the tail units cowl

Standard Long - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more. Comes with standard red Carbonin embroidered logo.

Description: Carbonin Standard Seat Unit Short 2021 Honda CBR1000RR-R FM2050HS
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.

Standard Short - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more. Comes with standard red Carbonin embroidered logo.

Description: Carbonin Avio Fiber Airbox Cover with Side Panels 2021 Honda CBR1000RR-R H20425AF
-will not fit with other brands or with your OEM tail unit
-Required for fitment with Carbonin 2021 Honda CBR1000RR-R tail unit in Carbon Fiber CH20300 or Avio Fiber H20300AF due to the mounting design
-Does not include Required Brackets for Airbox Cover (2 pcs) IN2001H

Description: Accossato Mirror Covers, in CNC-worked Aluminium and anodyzed in many colours MC004N
Accossato Mirror Covers, CNC-worked and anodyzed aluminium - many colours available. Sold in pairs, Compatible with specific motorcycle applications.

Description: Bonamici Racing Aluminium Brake Lever Aprilia RSV4, Factory, APRC, Tuono 1100, RS 660, Tuono 660 - Honda CBR 1000 RR-R Fireblade SP - Kawasaki ZX-10R (2016/2020) - KTM 1290 Superduke 2020/> - Triumph Daytona 675 675 R (2011/2016), Speed Triple 1050 (2011/2017) LB110

Description: Bonamici Racing Aluminum chain adjuster Suzuki GSX-R 1000 17-23 CHAD06_BK

Bonamici Racing is an Italian manufacturer of CNC machined performance parts such as rearsets, engine covers, chain adjusters, triple clamps, dashboard covers, clip-ons, levers, chain protectors, etc. Bonamici Racing is supplier to numerous teams in e.g. the World Superbikes (WSBK) and Endurance World Campionship (EWC). Everything is made in Italy.

Description: Bonamici Racing Engine Protection Full Kit For Honda CBR 1000RR-R Fireblade 2020 - 2023 CP100

Worried about dropping your Honda whether it be on the Track or Road and damaging your engine? Bonamici Racing completely understand the risks involved of riding an expensive superbike and they have developed their range of Engine Protectors to help mitigate any damage done to your engine in the event of an accident. These Engine Protectors are manufactured from Billet Aluminium in their factory based in the heart of Italy and is treated to a black surface anodised finish to help improve corrosion resistance and durability. Whatever bike you ride, you can rest assured these Engine Protectors will save yourself from a costly repair bill! Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment and compatibility, after this their parts are fine tuned, tested and validated through various levels of Motorsport.
No glue is needed!
High end quality made in Italy

Description: Bonamici Racing Engine Protection Right Side (Clutch) For Honda CBR 1000RR-R Fireblade 2020 - 2023 CP098

Worried about dropping your Honda whether it be on the Track or Road and damaging your engine? Bonamici Racing completely understand the risks involved of riding an expensive superbike and they have developed their range of Engine Protectors to help mitigate any damage done to your engine in the event of an accident. These Engine Protectors are manufactured from Billet Aluminium in their factory based in the heart of Italy and is treated to a black surface anodised finish to help improve corrosion resistance and durability. Whatever bike you ride, you can rest assured these Engine Protectors will save yourself from a costly repair bill! Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment and compatibility, after this their parts are fine tuned, tested and validated through various levels of Motorsport.
No glue is needed!
High end quality made in Italy

Description: Bonamici Racing Engine Protection Right Side (distrib.) For Honda CBR 1000RR-R Fireblade 2020 - 2023 CP097

These Engine Protectors are manufactured from Billet Aluminium in their factory based in the heart of Italy and is treated to a black surface anodised finish to help improve corrosion resistance and durability. Whatever bike you ride, you can rest assured these Engine Protectors will save yourself from a costly repair bill! Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment and compatibility, after this their parts are fine tuned, tested and validated through various levels of Motorsport.
No glue is needed!
High end quality made in Italy

Description: Item Summary

Brembo Part# 107A48624

Brake Pad Set, Z03 M56 8 Z03 for Nissin Calipers, CBR1000RR-R, BMW M1000RR

Description: Brake Pad Set, Z04 M56 8 Z04 for Nissin Calipers, CBR1000RR-R, BMW M1000RR

Description:

19 RCS Corsa Corta, Long Lever, Radial, Front

The Brembo radial master cylinder with 6 different brake modulation options. The 19RCS CORSA CORTA is characterized by the possibility it provides the rider to adapt the braking "bite point" to the desired riding feeling, in addition to the RCS (Ratio Click System), introduced 10 years ago on the Brembo 19RCS radial brake master cylinder, which allows the center distance of the master cylinder to be adjusted to "18" or "20".
The meticulous study to improve the master cylinder has allowed Brembo to propose three brake master cylinders in one and to further improve braking system performance. Furthermore, taking advantage of the mixture stemming from the 18 to 20 center distance and the three maps - R,S,N - no less than 6 different combinations can be attained.
The play selector lets the rider choose between the three different available feeling maps. With the Normal map, the bite point position is such to guarantee a more gradual initial phase and is therefore suitable for city riding or braking in poor grip conditions. With the Sport map, the bite point position is such to shorten the initial phase compared to the N setting. This second map allows for a more dynamic response and a sportier riding style.
Lastly, with the Race map, the eccentric device allows the initial phase to be shortened even more, taking it to a minimum value at the same level as the master cylinders used in MotoGP: this way, the rider is able to reach the braking bite point at lighting fast speeds. This third map is ideal for a racing riding style that shaves off precious hundredths of a second in braking.
The RCS system (Ratio Click System), on the other hand, shifts the distance between the fulcrum point and the point of application on the master cylinder push rod by 2 millimeters: this results in a different distribution of the braking force without it being modified in terms of pure power.
The master cylinder body is made of forge aluminum alloy, machined with 5-axis CAM technology. A hard oxide coating is used for the surface finish, which guarantees that the master cylinder main body is highly resistant to wear and its components move easily. The floating piston and the seals derive directly from those used in MotoGP, as do the housings for the bleeding and fueling systems, which are inclined by more than 30° to make bleeding the master cylinder easier. A study was conducted for the design of the 19RCS CORSA CORTA in order to find consistency of style between all the components of the master cylinder, which now has a distinct, dynamic and sporty look in line with the style of the bikes for which it was conceived (model or design filed simultaneously with the filing of the patent on the technological solution). The lever assembly can be replaced without disassembling the RCS system (Ratio Click System) from the master cylinder and this allows the calibrations made in the installation phase to be maintained unaltered.

Description: Dimpled Velocity stacks for Honda CBR1000RR 2017+
Please note these do not fit the CBR1000RR-R Fireblade from 2020+ which has a different airbox

Description: Item 425EvoSC82 Special, Analouge high sensitive GP ASG Superbike quickshifter/blip sensor for Honda CBR1000RR-R (SC82) with std. or kit HRC ECU from 2020- Replace OEM QS for up and downshift.
Configurable for push or pull linkage (street or race shift).
Completely plug and play mounted with Pinbolts and 150 mm aluminum rod and uniballs included.

Description: Extreme Components Clutch control racing with GP EVO lever offset 29 mm - CFC29N This does not have a clutch switch so would need drilled and tapped if required for your model
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Made from Kevlar this Brakeline is Ultra Lightweight.
Designed to Fit the New Honda CBR1000RR-R Fireblade 2021 US model with Nissin calipers this is a replacement ABS Brakeline kit With Banjo Bolts
If you are using a different Caliper or Master cylinder from oem please specify in checkout notes so we can order with correct fittings and banjo threads
*often this item is made to order due to color options so please allow up to 4 weeks for delivery.

Description: Made from Kevlar this Brakeline is Ultra Lightweight.
Designed to Fit the New Honda CBR1000RR-R SP Fireblade 2021 US model with brembo calipers this kit removes the ABS Lines and comes With Banjo Bolts
If you are using a different Caliper or Master cylinder from oem please specify in checkout notes so we can order with correct fittings and banjo threads
*often this item is made to order due to color options so please allow up to 4 weeks for delivery.

Description: TK Dischi Evo 5.75mm Ventilated Floating Rotors for Competition for the 2021 CBR1000RR-R SP comes with a Blue Hub on one side and a Red Hub on the other side.
-Bobbin-less
-Exclusive Carrier Technology
-More Mounting points than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct