HHR Performance » 2023, Kawasaki

Description: Carbon fiber airbox inlet tube and fairing bracket weighing in at 313grams
Designed to replace the oem tube and bracket.

Description: This is the battery tray section and does not include the following parts:
Left wing
Right wing
Seat unit top
Seat unit bracket and Dzus which all need to be purchased as a Kit under part number CK22300-Kit
These are being sold as replacement parts and do not interchange with the oem bodywork panels

Seat Foams need to be purchased separately

Description: Lightweight Carbon fender Oem Replacement

Description: Carbon fiber rear fender oem replacement

Description: Whether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:

Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.

These are light-weight and do not interfere with any OEM bodywork.

These also look great and give your bike a great appearance

Description: This tail unit is for racing and includes
Seat unit top section
Left wing
Right wing
Under tail battery tray
Seat unit bracket and Dzus

Seat Foams need to be purchased separately

Description: Replacement Right hand WInglet for Carbonin Carbon fiber race tail
Please note that this will not fit as an interchangeable part with the oen bodywork. It only fits the Carbonin race tail due to its design

Description: This is the Seat unit top section and does not include the following parts:
Left wing
Right wing
Under tail battery tray
Seat unit bracket and Dzus which all need to be purchased as a Kit under part number CK22300-Kit
These are being sold as replacement parts and do not interchange with the oem bodywork panels

Seat Foams need to be purchased separately

Description: Made from Woven Carbon Fiber these Brake lines are Ultra Lightweight and flexible

Designed to Fit Roll race bikes that are lowered.
Line comes from the Master cylinder to the left brake caliper and has 2 45° Forward bends
Will not fit Oem ride height. You must have a strapped and lowered front ride height
Fits BMW S1000RR 2020+ Kawasaki ZX10R and RR Gen GSXR1000 2017+

Woven carbon fiber with Black Aluminum fittings
It is very important to make sure there is no chaffing or rubbing of any bodywork or any parts which could cause damage to this Carbon brake line.

Description: DYMAG UP7X FORGED ALUMINUM FRONT KAWASAKI NINJA ZX-6R/636 ZX6RR from 2004 through current year model

Front Dymag Aluminum UP7X Front Wheel comes in one size

17 x 3.5"

-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.

Description: Extreme Components Clutch control racing with GP EVO lever offset 29 mm - CFC29N This does not have a clutch switch so would need drilled and tapped if required for your model
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP EVO Carbon Fiber Clutch Lever Guard FPLEVO
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube

Description: This Kit includes Clutch/Alternator/Water Pump Covers for the Ninja 400
FIM Approved

Description: I2M CHROME ADAPTER CARD



Compatible with: Chrome lite / plus / pro



The I2M adapter card is required to connect the I2M Chrome instrumentation harness to your bike.

Completely Plug & Play and therefore does not require any modification or further connections.

Description: Motoholders ZX 636 19 FAIRING STAY WITH CARBON FIBER AIR DUCT IK037003C

Description: Motoholders ZX 636 19+ FAIRING STAY FOR ORIGINAL AIR DUCT+ IK037003

-Aluminum Dashboard Stay (mounts to oem Airduct)

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
*use Convex 5-Bolt Hub Rear wheel including Bolt-On Adapter
! Part No. C70600B733 is not simple to install, please follow
accompanying specific step-by-step mounting instructions and
necessary tools that come standard included with this rear wheel.

Description: *NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6" for 2021 ZX10RR ONly Does not fir 2021 ZX10R
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Includes Sprocket Carrier and Cush Drive Rubbers

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Includes Sprocket Carrier and Cush Drive Rubbers

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.

Description: Suter Racing Swingarm Kawasaki ZX-10R 2021-2024 041-62042
The Suter swingarm boosts performance, gives more edge grip, confidence, and feel. Your bike will be faster and safer. It makes yours like a Factory one. The swingarm comes with all you need: Axis, mud-guard,etc.

Due to the modified design, a larger tire radius/diameter can be installed, and yet there are more adjustment possibilities! Also, the changed stiffness ensures better rideability of the motorcycle and more mechanical grip, especially when exiting the corner.

Note:

• Rear shock has to be modified for the use with this swingarm (lower fixing and length).
• Routing of the exhaust system has to be adapted to the new swingarm design. The exhaust is available as an additional part.
  
• For mounting the Suter Swingarm, the assembly kit is needed.

More confidence, more feel, more fun, faster, and safer!

Description: Teknofibra Extra Light Thermal Reflective Belly Pan Kit 30"x12"' .8mm Thickness 0121710638

-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.

Description: TK Dischi EVO Front Brake Rotors 300mm 2013-2020 Kawasaki ZX-6R 636

***Made specifically for the ZX-6R, will not fit the 636! for ZX636 use K01E 310 mm rotors

300mm x 5.75mm

-Sold as a set Left and Right
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-This would be the correct fit for Aftermarket wheels such as Rotobox Dymag or OZ wheels.
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct

Description: Translogic QSXi Quickshifter 2017 onwards Kawasaki Ninja 400R TLS-QSXi-P-DCS-25

1dn 5up or 1up 5dn road or race pattern

Kawasaki Quickshifter for Ninja 400R 2017 onwards (fuel injected) with standard road shift or inverted race shift gear lever set-up Does not come with a tie-rod kit, it has a small stainless steel left hand threaded rod QSXi Intellishift Quickshifter. Unique and powerful! Featuring our very latest superior Intellishift protocol providing the very best quickshifting possible. These advanced Intellishift quickshifters are the smallest multi-channel systems available and unlike other single channel quickshifters our latest range of Intellishift systems provide the finest MotoGP seamless shift simulation. Now with even more adjustment possibilities for professional users and throttle blipper output, its a winner!.

Description: Replacement Left side Fairing Cover For Carbonin complete fairing, will not fit with other brands
This is the portion that makes the wing and attaches to the carbonin upper and side panel