HHR Performance » 2012, Kawasaki, Ninja ZX-6R/636

Description: Extreme Components GP EVO Carbon Fiber Brake Lever Guard CPLEVO
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube

Description: Extreme Components GP EVO Carbon Fiber Clutch Lever Guard FPLEVO
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube

Description: Kawasaki ZX 6R 600/636 Ninja 2007-2019 Fits Standard OEM and Kawasaki Racing KIT Cover Alternator/Generator/Stator Cover Precision Injection Molded Long Glass Fiber Reinforced Nylon Highly Impact Resistant Highly Abrasion/Wear Resistant

Description: Kawasaki ZX 6R 600 Ninja 2009-2020 Fits Standard Clutch Cover ONLY Precision Injection Molded Long Glass Fiber Reinforced Nylon Highly Impact Resistant Highly Wear Resistant

Description: The Chrome Pro 2 comes in a package containing:
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.

Description: MIVV Slip-On Double Gun Titanium Exhaust For KAWASAKI ZX-6 R | ZX-6 R 636 2009 - 2016 K.022.SDG

Description: Motoholders FAIRING STAY WITH RAM AIR DUCT 2009-2012 Kawasaki ZX6R / 636

Description: MWR Fuel Filter for Kawasaki ZX-6R 2009+ and ZX-10R 2011+ MWR101

Fuel Filter sock

Description: MWR WSBK Air Filter for Kawasaki ZX-6R / 636 (2009+) MC040-09/WSBK

MWR World Superbike Air Filters

Description: Qnium Radial Rear Thumb Brake Master Cylinder 12mm

The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.

Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.

Made in The Netherlands

Description: *NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Includes Sprocket Carrier and Cush Drive Rubbers

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.

Description: Samco Sport 4 Piece Y-Piece Race Design Silicone Radiator Coolant Hose Kit Kawasaki ZX 6R 2009 - 2021 KAW-64

SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of Hose kits are usually stocked in black, blue, red and green.

Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.

Description: Samco Sport 6 Piece Silicone Radiator Coolant Hose Kit Kawasaki ZX 6R 2009 - 2021 KAW-31

SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of Hose kits are usually stocked in blue, red and green.

Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.

Description: Sprint Filter P08 F1-85 Kawasaki ZX-6R (09-20), Ninja 600 (09-12), and 636 ABS (13-19) 402645

Description: Suter Racing Suterclutch Kawasaki ZX6R / RR 2005-2012 004-46002


• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools

Description: Teknofibra Extra Light Thermal Reflective Belly Pan Kit 30"x12"' .8mm Thickness 0121710638

-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.

Description: TIGHTAILS KAWASAKI ZX6 13-18' REAR SUPPORT BRACKET KAWZX69BRA

Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.

Description: Translogic QSXi Quickshifter 2004+ Kawasaki ZX6R, ZX636R, ZX10R, & ZX12R TLS-QSXi-YK-DCS

1dn 5up or 1up 5dn road or race pattern

Kawasaki Quickshifter for ZX6R, ZX636R, ZX10R, & ZX12R models 2004 onwards with standard road shift or inverted race shift gear lever set-up QSXi Intellishift Quickshifter. Unique and powerful! Featuring our very latest superior Intellishift protocol providing the very best quickshifting possible. These advanced Intellishift quickshifters are the smallest multi-channel systems available and unlike other single channel quickshifters our latest range of Intellishift systems provide the finest MotoGP seamless shift simulation. Now with even more adjustment possibilities for professional users and throttle blipper output, its a winner!.

Description: Vesrah is considered one of the top racing brake pads manufactures.
Fits Kawasaki ZX6R 07-18

The JL Brake Pad compound is the recommended choice for the rear brake where more control and feel is required. The JL compound has less power than the Racing RJL/SRJL brake pads to provide more feel..
Pad compound is resistant to fade related to heat buildup.
No Bedding in of the pad is required before usage
JL Compound is recommended for the Kawasaki 250 Ninja

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (4 Dzus)
• Lower Fairing
• Single Race Seat (2 Pcs) seat support and SBK tail

There are 3 options for seats (not included in kit)

Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order