- Home »
- Catalog
HHR Performance » MV Agusta
Products for:
- Make: MV Agusta
View Universal items for: MV Agusta
Browse Products
Items 1-60 of 86
- Page 1 of 2
- Next
Description:
Armour Bodies MV Agusta F3 Pro Series SuperSport Kit 71-0780SS
Item #: 71-0780SS
Condition:
New
Price: $924.99
Description:
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350317
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
Description:
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350318
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
Description:
Rotobox BOOST Convex Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 2.93 kg / 6.45 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
MV Agusta F3 /F4 /1090R /990R /800 Brutale /Rivale /Dragster
Rotobox BOOST Convex Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 2.93 kg / 6.45 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: CA70600721
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,630.00
Description:
Rotobox RBX2 Front Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350117
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,922.00
Description:
Rotobox RBX2 Front Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350118
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,922.00
Description:
Rotobox RBX2 Convex Rear Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 2.93 kg / 6.45 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
MV Agusta F3 /F4 /1090R /990R /800 Brutale /Rivale /Dragster
Rotobox RBX2 Convex Rear Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 2.93 kg / 6.45 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: CA70600521
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $3,630.00
MV Agusta
Description:
Aluminum brackets for side panels *required
Item #: ALU2112MV
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $83.37
MV F3,bodywork,carbonin
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs; 5 Dzus)
Required fitment kit to mount this fairing
• Aluminum support for side panels (2 pcs with 2 Dzus)
• air box inlet tubes
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs; 5 Dzus)
Required fitment kit to mount this fairing
• Aluminum support for side panels (2 pcs with 2 Dzus)
• air box inlet tubes
Item #: MV2101AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,121.47
Description:
AiM SOLO DL MV Augusta F3 675 (2013 & later) ECU interface harness
Item #: V02569310
Condition:
New
Aim Supply has been severely affected due to material shortages and most products are currently on a 3 month delivery date. Please send us an email request to find out ETAs.
Price: $73.00
Description:
Alpha Racing Brake lever Racing blade long, for Brembo 19RCS (WILL NOT FIT CORSA CORTA) BMW S1000RR/HP4 2009-2019,S1000R 2014-2016,S1000XR 2015-2016,M1000RR 2021- 3272A002A00
Brake lever Racing blade long, for Brembo master cylinder 19RCS, black anodized, optional with remote adjuster available
Brake lever Racing blade long, for Brembo master cylinder 19RCS, black anodized, optional with remote adjuster available
Item #: 3272A002A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $57.86
Description:
Alpha Racing Stroke indicator front fork 43 mm Kawasaki ZX-10R 2011- | MV Agusta F3 675 2012-|Yamaha YZF-R1 2015 - 2016 3142A045A01
Stroke indicator front fork 43 mm, including spring ring
Stroke indicator front fork 43 mm, including spring ring
Item #: 3142A045A01
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $25.39
Description:
APEX RACING DEVELOPMENT THREE BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 WITH AUXILIARY FUNCTION
TBESFMAWAF
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation. Third button can be used for auxiliary function such as lap timer, tail light or ignition power (incase bike is equipped with ignition key bypass)
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- Available in housing that mounts as back bracket for brake master cylinder.
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation. Third button can be used for auxiliary function such as lap timer, tail light or ignition power (incase bike is equipped with ignition key bypass)
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- Available in housing that mounts as back bracket for brake master cylinder.
Item #: TBESFMAWAF
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $231.00
Description:
APEX RACING DEVELOPMENT THREE BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 WITH AUXILIARY FUNCTION (BREMBO MOUNT INLINE)
TBESFMAWAF-BMI
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline mounting bore.
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline mounting bore.
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: TBESFMAWAF-BMI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $236.00
Description:
APEX RACING DEVELOPMENT THREE BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 WITH AUXILIARY FUNCTION (BREMBO MOUNT OFFSET)
TBESFMAWAF-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm)
- Main functions are ignition circuit activator / breaker and starter activation.
- Third button can be used for auxiliary function such as Lap, Tail light or ignition power.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm)
- Main functions are ignition circuit activator / breaker and starter activation.
- Third button can be used for auxiliary function such as Lap, Tail light or ignition power.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: TBESFMAWAF-BMO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $236.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 DUP12L5ME
- The switch is a direct plug and play replacement for OEM ignition switch for all Panigale models with auxiliary quick change (paddle) switch.
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 45 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note !!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black, LAP/Passing (momentary blue).
- Note !!! - To be used with a 5 button left switch Part No.DUP12L5ME+
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Plug and play with OEM connector.
- The switch is a direct plug and play replacement for OEM ignition switch for all Panigale models with auxiliary quick change (paddle) switch.
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 45 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note !!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black, LAP/Passing (momentary blue).
- Note !!! - To be used with a 5 button left switch Part No.DUP12L5ME+
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Plug and play with OEM connector.
Item #: TBESFMV-F3/F4
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 (BREMBO MOUNT INLINE)
TBESFMV-F3/F4-BMI
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline mounting bore.
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline mounting bore.
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: TBESFMV-F3/F4-BMI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 (BREMBO MOUNT OFFSET)
TBESFMV-F3/F4-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm).
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm).
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: TBESFMV-F3/F4-BMO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
Bonamici Racing Aluminium Clutch Lever MVAgusta F3 675/ F3 800 (2011/>) LC110
Item #: LC110
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $127.47
Description:
Bonamici Racing Aluminium Lever Kit MVAgusta F3 675/ F3 800 (2011/>) KL200
Item #: KL200
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $271.43
Description:
Bonamici Racing Aluminum tank cap for MV Agusta F4 - B4 10-19 FC130
This Fuel Cap has been designed by Bonamici to directly replace the OEM Fuel Cap component on the MV Agusta F4 - B4 10-19 allowing you to have faster fueling times, drastically helping in something like a pit lane environment. This Fuel Tank Cap kit is perfect for either a Trackday Warrior or even your Fair Weather Rider! Manufactured from Billet Aluminium and treated to an anodized surface finish, you can rest assured that this Fuel Tank Cap Kit will withstand the harshest of conditions while looking amazing at the same time!
This Fuel Cap has been designed by Bonamici to directly replace the OEM Fuel Cap component on the MV Agusta F4 - B4 10-19 allowing you to have faster fueling times, drastically helping in something like a pit lane environment. This Fuel Tank Cap kit is perfect for either a Trackday Warrior or even your Fair Weather Rider! Manufactured from Billet Aluminium and treated to an anodized surface finish, you can rest assured that this Fuel Tank Cap Kit will withstand the harshest of conditions while looking amazing at the same time!
Item #: FC130
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks
Please note supply-chain related delays are possible.
Price: $117.58
Description:
Bonamici Racing Fuel Tank Cap MV Agusta F4 / Brutale FC190
This Fuel Cap has been designed by Bonamici to directly replace the OEM Fuel Cap component on your MV Agusta, allowing you to have faster fueling times, drastically helping in something like a pit lane environment. This Fuel Tank Cap kit is perfect for either a Trackday Warrior or even your Fair Weather Rider! Manufactured from Billet Aluminium and treated to an anodized surface finish, you can rest assured that this Fuel Tank Cap Kit will withstand the harshest of conditions while looking amazing at the same time!
This Fuel Cap has been designed by Bonamici to directly replace the OEM Fuel Cap component on your MV Agusta, allowing you to have faster fueling times, drastically helping in something like a pit lane environment. This Fuel Tank Cap kit is perfect for either a Trackday Warrior or even your Fair Weather Rider! Manufactured from Billet Aluminium and treated to an anodized surface finish, you can rest assured that this Fuel Tank Cap Kit will withstand the harshest of conditions while looking amazing at the same time!
Item #: FC190
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks
Please note supply-chain related delays are possible.
Price: $117.58
Description:
This monoblock caliper, obtained from a single piece of cast aluminium, is made with the most advanced casting and machining technologies in order to obtain a solid caliper body which is ultra light and has excellent stiffness and precision operating values. The hydraulics were given particular attention, as was the shape of the caliper body, both of which were the focus of technical fine-tuning. The caliper body, which houses four 34 mm diameter pistons, is characterised by significant stiffness values which are obtained thanks to the peculiarity of the triple bridge shape.
With these cast monoblock calipers Brembo makes the technology which has been successfully employed in MotoGP available to all enthusiasts. This is technology which allows the caliper body to be obtained from a single piece of cast aluminium, thereby guaranteeing optimum stiffness.
The surface finish is anodised in titanium colour. The product is provided in a kit made up of two calipers and sintered brake pads which represent the absolute best quality available on the market today.
100mm Mount Spacing, P4 34mm Pistons, Front, Titanium
This monoblock caliper, obtained from a single piece of cast aluminium, is made with the most advanced casting and machining technologies in order to obtain a solid caliper body which is ultra light and has excellent stiffness and precision operating values. The hydraulics were given particular attention, as was the shape of the caliper body, both of which were the focus of technical fine-tuning. The caliper body, which houses four 34 mm diameter pistons, is characterised by significant stiffness values which are obtained thanks to the peculiarity of the triple bridge shape.
With these cast monoblock calipers Brembo makes the technology which has been successfully employed in MotoGP available to all enthusiasts. This is technology which allows the caliper body to be obtained from a single piece of cast aluminium, thereby guaranteeing optimum stiffness.
The surface finish is anodised in titanium colour. The product is provided in a kit made up of two calipers and sintered brake pads which represent the absolute best quality available on the market today.
Item #: 220988530
Condition:
New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $699.00
Description:
Supersport discs, developed to provide the highest possible performance on the road and on the track, are available with a rotor measuring 34 mm in width and oversized to 5.5 mm in thickness, fully interchangeable with the original components without any modifications. These are fully floating discs consisting of a rotor in thermally treated steel (capable of resisting extreme thermo-mechanical stress) and a housing machined from billet aluminium alloy.
In combination with Brembo Z04 brake pads these discs have won numerous SuperSport Championships, including the 2012, 2011 and 2009 editions. The complete range of Brembo SuperSport discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The Supersport discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Stainless Steel, Floating, Gold Carrier, MV Augusta
Supersport discs, developed to provide the highest possible performance on the road and on the track, are available with a rotor measuring 34 mm in width and oversized to 5.5 mm in thickness, fully interchangeable with the original components without any modifications. These are fully floating discs consisting of a rotor in thermally treated steel (capable of resisting extreme thermo-mechanical stress) and a housing machined from billet aluminium alloy.
In combination with Brembo Z04 brake pads these discs have won numerous SuperSport Championships, including the 2012, 2011 and 2009 editions. The complete range of Brembo SuperSport discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The Supersport discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Item #: 208973727
Condition:
New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $575.00
Description:
Derived from the experience gained in SBK and MotoGP, the brand new T-Drive disc is the natural technical evolution of latest generation Brembo competition brake discs. The special shape of the 8 “T” pins on the disc and the eight shapes on the braking torque dragging system housing are the innovative element which strongly differentiates the new T-Drive from discs with cylindrical bushing systems. In fact, as a result of specific studies into process and machining tolerances, this unique configuration transfers braking torque more effectively, providing improved resistance to thermo-mechanical stress, especially in extreme conditions of use such as racing.
The connection between housing and rotor is ensured by a special guillotine hooking system (patent pending) which allows both radial and axial floating and reduces the overall weight of the disc, resulting in a significant advantage in terms of rideability compared to the traditional bushing system. Both performance consistency and the efficiency of disc and brake pads coupling during the running-in period have been significantly improved thanks to a rotor - in steel identical to that used for the discs in SBK and MotoGP - characterised by a new differentiated diameter hole pattern. The rotor height has also been optimised: maintaining a thickness of 5.5 mm, the height could be reduced to the advantage of containing weight and the moment of inertia with the consequential benefit of improved vehicle handling.
The housing is black anthracite anodised like latest generation racing discs. The Brembo logo is on the housing, machined from billet and painted in an unmistakeable red, yet another distinctive sign that characterises the racing image. All of the Brembo “T-Drive” discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The T-drive discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Floating, Black Carrier, MV Augusta
Derived from the experience gained in SBK and MotoGP, the brand new T-Drive disc is the natural technical evolution of latest generation Brembo competition brake discs. The special shape of the 8 “T” pins on the disc and the eight shapes on the braking torque dragging system housing are the innovative element which strongly differentiates the new T-Drive from discs with cylindrical bushing systems. In fact, as a result of specific studies into process and machining tolerances, this unique configuration transfers braking torque more effectively, providing improved resistance to thermo-mechanical stress, especially in extreme conditions of use such as racing.
The connection between housing and rotor is ensured by a special guillotine hooking system (patent pending) which allows both radial and axial floating and reduces the overall weight of the disc, resulting in a significant advantage in terms of rideability compared to the traditional bushing system. Both performance consistency and the efficiency of disc and brake pads coupling during the running-in period have been significantly improved thanks to a rotor - in steel identical to that used for the discs in SBK and MotoGP - characterised by a new differentiated diameter hole pattern. The rotor height has also been optimised: maintaining a thickness of 5.5 mm, the height could be reduced to the advantage of containing weight and the moment of inertia with the consequential benefit of improved vehicle handling.
The housing is black anthracite anodised like latest generation racing discs. The Brembo logo is on the housing, machined from billet and painted in an unmistakeable red, yet another distinctive sign that characterises the racing image. All of the Brembo “T-Drive” discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The T-drive discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Item #: 208A98527
Condition:
New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $699.00
Description:
Supersport discs, developed to provide the highest possible performance on the road and on the track, are available with a rotor measuring 34 mm in width and oversized to 5.5 mm in thickness, fully interchangeable with the original components without any modifications. These are fully floating discs consisting of a rotor in thermally treated steel (capable of resisting extreme thermo-mechanical stress) and a housing machined from billet aluminium alloy.
In combination with Brembo Z04 brake pads these discs have won numerous SuperSport Championships, including the 2012, 2011 and 2009 editions. The complete range of Brembo SuperSport discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The Supersport discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Stainless Steel, Floating, Gold Carrier, MV Augusta
Supersport discs, developed to provide the highest possible performance on the road and on the track, are available with a rotor measuring 34 mm in width and oversized to 5.5 mm in thickness, fully interchangeable with the original components without any modifications. These are fully floating discs consisting of a rotor in thermally treated steel (capable of resisting extreme thermo-mechanical stress) and a housing machined from billet aluminium alloy.
In combination with Brembo Z04 brake pads these discs have won numerous SuperSport Championships, including the 2012, 2011 and 2009 editions. The complete range of Brembo SuperSport discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The Supersport discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Item #: 208973728
Condition:
New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $575.00
Description:
Supersport discs, developed to provide the highest possible performance on the road and on the track, are available with a rotor measuring 34 mm in width and oversized to 5.5 mm in thickness, fully interchangeable with the original components without any modifications. These are fully floating discs consisting of a rotor in thermally treated steel (capable of resisting extreme thermo-mechanical stress) and a housing machined from billet aluminium alloy.
In combination with Brembo Z04 brake pads these discs have won numerous SuperSport Championships, including the 2012, 2011 and 2009 editions. The complete range of Brembo SuperSport discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The Supersport discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Stainless Steel, Floating, Gold Carrier, MV Augusta
Supersport discs, developed to provide the highest possible performance on the road and on the track, are available with a rotor measuring 34 mm in width and oversized to 5.5 mm in thickness, fully interchangeable with the original components without any modifications. These are fully floating discs consisting of a rotor in thermally treated steel (capable of resisting extreme thermo-mechanical stress) and a housing machined from billet aluminium alloy.
In combination with Brembo Z04 brake pads these discs have won numerous SuperSport Championships, including the 2012, 2011 and 2009 editions. The complete range of Brembo SuperSport discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The Supersport discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Item #: 208973747
Condition:
New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $575.00
Description:
Derived from the experience gained in SBK and MotoGP, the brand new T-Drive disc is the natural technical evolution of latest generation Brembo competition brake discs. The special shape of the 8 “T” pins on the disc and the eight shapes on the braking torque dragging system housing are the innovative element which strongly differentiates the new T-Drive from discs with cylindrical bushing systems. In fact, as a result of specific studies into process and machining tolerances, this unique configuration transfers braking torque more effectively, providing improved resistance to thermo-mechanical stress, especially in extreme conditions of use such as racing.
The connection between housing and rotor is ensured by a special guillotine hooking system (patent pending) which allows both radial and axial floating and reduces the overall weight of the disc, resulting in a significant advantage in terms of rideability compared to the traditional bushing system. Both performance consistency and the efficiency of disc and brake pads coupling during the running-in period have been significantly improved thanks to a rotor - in steel identical to that used for the discs in SBK and MotoGP - characterised by a new differentiated diameter hole pattern. The rotor height has also been optimised: maintaining a thickness of 5.5 mm, the height could be reduced to the advantage of containing weight and the moment of inertia with the consequential benefit of improved vehicle handling.
The housing is black anthracite anodised like latest generation racing discs. The Brembo logo is on the housing, machined from billet and painted in an unmistakeable red, yet another distinctive sign that characterises the racing image. All of the Brembo “T-Drive” discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The T-drive discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Floating, Black Carrier, MV Augusta
Derived from the experience gained in SBK and MotoGP, the brand new T-Drive disc is the natural technical evolution of latest generation Brembo competition brake discs. The special shape of the 8 “T” pins on the disc and the eight shapes on the braking torque dragging system housing are the innovative element which strongly differentiates the new T-Drive from discs with cylindrical bushing systems. In fact, as a result of specific studies into process and machining tolerances, this unique configuration transfers braking torque more effectively, providing improved resistance to thermo-mechanical stress, especially in extreme conditions of use such as racing.
The connection between housing and rotor is ensured by a special guillotine hooking system (patent pending) which allows both radial and axial floating and reduces the overall weight of the disc, resulting in a significant advantage in terms of rideability compared to the traditional bushing system. Both performance consistency and the efficiency of disc and brake pads coupling during the running-in period have been significantly improved thanks to a rotor - in steel identical to that used for the discs in SBK and MotoGP - characterised by a new differentiated diameter hole pattern. The rotor height has also been optimised: maintaining a thickness of 5.5 mm, the height could be reduced to the advantage of containing weight and the moment of inertia with the consequential benefit of improved vehicle handling.
The housing is black anthracite anodised like latest generation racing discs. The Brembo logo is on the housing, machined from billet and painted in an unmistakeable red, yet another distinctive sign that characterises the racing image. All of the Brembo “T-Drive” discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The T-drive discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Item #: 208A98547
Condition:
New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $699.00
Description:
Avio fiber air inlet tube full length
Item #: MV2070AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $216.03
Description:
Replacement left side fairing
Item #: MV2231AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $168.02
Description:
Replacement lower fairing
Item #: MV2220AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $246.70
MV F3,carbonin, fairing, bodywork
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs; 5 Dzus)
Required fitment kit to mount this fairing
• Aluminum support for side panels (2 pcs with 2 Dzus)
• air box inlet tubes
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs; 5 Dzus)
Required fitment kit to mount this fairing
• Aluminum support for side panels (2 pcs with 2 Dzus)
• air box inlet tubes
Item #: MV2100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,121.47
Description:
Replacement Right side fairing
Item #: MV2232AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $168.02
Description:
Replacement Supersport left side fairing for large radiator
Item #: MV2233AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $168.02
No Image Available
Description:
Avio fiber air inlet tube Long tubes
Requires Short supersport tube to make complete tubes
Only to be used with supersport fairing, this version has a larger air inlet and is designed so part of the tube stays attached to the frame while the other parts the fairing so it is easier to work on the front end while upper fairing removed"
Requires Short supersport tube to make complete tubes
Only to be used with supersport fairing, this version has a larger air inlet and is designed so part of the tube stays attached to the frame while the other parts the fairing so it is easier to work on the front end while upper fairing removed"
Item #: MV2074AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $160.02
Description:
Replacement Supersport Right side fairing for large radiator
Item #: MV2234AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $181.36
No Image Available
Description:
Avio fiber air inlet tube Short tubes
Requires long supersport tubes to make complete tube
Only to be used with supersport fairing, this version has a larger air inlet and is designed so part of the tube stays attached to the frame while the other parts the fairing so it is easier to work on the front end while upper fairing removed"
Requires long supersport tubes to make complete tube
Only to be used with supersport fairing, this version has a larger air inlet and is designed so part of the tube stays attached to the frame while the other parts the fairing so it is easier to work on the front end while upper fairing removed"
Item #: MV2073AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $100.01
Description:
"Replacement Supersport upper fairing with Dzus
Larger air intake openings and room for larger radiator"
Larger air intake openings and room for larger radiator"
Item #: MV2211AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $348.04
Description:
Replacement Tail unit and seat pan
Item #: MV2300AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $376.05
Description:
Replacement upper fairing with Dzus
Item #: MV2210AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $348.04
Description:
MV Agust F3 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM260MV
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $325.37
Description:
MV Agust F3 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM250MV
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $238.70
MV Agusta, Cordona, Quickshifter,
Description:
Cordona GP ASG Superbike Quickshifter-Blipper, MV Agusta 423std
Analogue Strain Gauge Load Cell for ECU’s with upshifts and auto blipper for downshifts. Used from advanced ECU’s as Magneti-Marelli, Motec, Mectronik, MotoGP ECUs to many OEM and Flashed ECU’s for street bikes with analogue 0-5v input.
The GP ASG Superbike sensor greatly improves the gear change performance and reliability compared to OEM and other competitors. It gives a superior distinct and smooth gear change performance similar to top GP and WSBK systems.
Compared to OEM and other shifters the Cordona ASG Superbike is faster, more distinct and have smoother action. The bike will use less traction control and not upset chassis under gear changes as much, especially during lean angle.
Analogue Strain Gauge Load Cell for ECU’s with upshifts and auto blipper for downshifts. Used from advanced ECU’s as Magneti-Marelli, Motec, Mectronik, MotoGP ECUs to many OEM and Flashed ECU’s for street bikes with analogue 0-5v input.
The GP ASG Superbike sensor greatly improves the gear change performance and reliability compared to OEM and other competitors. It gives a superior distinct and smooth gear change performance similar to top GP and WSBK systems.
Compared to OEM and other shifters the Cordona ASG Superbike is faster, more distinct and have smoother action. The bike will use less traction control and not upset chassis under gear changes as much, especially during lean angle.
Item #: COR-423std
Condition:
New
Currently our delivery times are 7 to 10 business days from time of order confirmation.
Price: $401.35
MV Agusta, Cordona, Quickshifter,
Description:
Cordona GP ASG Superbike Quickshifter-Blipper, MV Agusta 423Spec
Item 423Speciale, Analogue high sensitive GP ASG Superbike quickshifter/blip sensor for MV Agusta Euro4 bikes with **EAS 2.0 interface. **Note that you must a 3-wire analogue EAS 2.0 interface to the shifter. This shifter replace OEM EAS 2.0 for up and downshift.
Configurable for push or pull linkage (street or race shift).
**For a two wire interface to the shifter you need item 412.
Completely plug and play mounted with Pinbolts and 110 mm aluminum rod and uniballs included. The new developed GP ASG Superbike sensor is a direct plug & play OEM replacement quickshifter/blipper (or only quickshifter) for modern Superbikes and Streetbikes with an analogue 0-5v interface to the ECU.
The GP ASG Superbike sensor greatly improves the gear change performance and gives a superior distinct and smooth gear change feeling similar to top GP and WSBK systems.
The Strain Gauge technology is far more reliable than spring loaded OEM shifters and is fully weather protected.
The GP ASG Superbike is easily configurable for push or pull gear linkage (street or race gear shift).
Replace OEM quickshifter for newer (Euro4) Brutale, Brutale RR, Dragster 800, Dragster 800RR, F3 675, F3 800, Rivale 800, Stradale 800 with 3 wires in quickshifter connector.
Configurable for push or pull linkage.
Pinbolts and std 132 mm aluminum rod included. Some bikes might need different rod length.
Item 423Speciale, Analogue high sensitive GP ASG Superbike quickshifter/blip sensor for MV Agusta Euro4 bikes with **EAS 2.0 interface. **Note that you must a 3-wire analogue EAS 2.0 interface to the shifter. This shifter replace OEM EAS 2.0 for up and downshift.
Configurable for push or pull linkage (street or race shift).
**For a two wire interface to the shifter you need item 412.
Completely plug and play mounted with Pinbolts and 110 mm aluminum rod and uniballs included. The new developed GP ASG Superbike sensor is a direct plug & play OEM replacement quickshifter/blipper (or only quickshifter) for modern Superbikes and Streetbikes with an analogue 0-5v interface to the ECU.
The GP ASG Superbike sensor greatly improves the gear change performance and gives a superior distinct and smooth gear change feeling similar to top GP and WSBK systems.
The Strain Gauge technology is far more reliable than spring loaded OEM shifters and is fully weather protected.
The GP ASG Superbike is easily configurable for push or pull gear linkage (street or race gear shift).
Replace OEM quickshifter for newer (Euro4) Brutale, Brutale RR, Dragster 800, Dragster 800RR, F3 675, F3 800, Rivale 800, Stradale 800 with 3 wires in quickshifter connector.
Configurable for push or pull linkage.
Pinbolts and std 132 mm aluminum rod included. Some bikes might need different rod length.
Item #: COR-423Spec
Condition:
New
Currently our delivery times are 7 to 10 business days from time of order confirmation.
Price: $447.35
MV Agusta, Cordona, Quickshifter,
Description:
Cordona GP SG Switch Quickshifter, MV Agusta F3 675, 800 Brutale Etc 412
Item 409 - standard Strain Gauge GP SG Switch for MV Agusta models includes;
@ strain gauge/load cell technology - no movable parts with very distinct and precise gear change
@ sensor design - fully sealed and super durable CNC high precision strain less steel sensor
@ switch quickshifter - can be set to close (t1) or open (t2) the loop for upshift
@ adaptive sensing of direction - upshift configurable for push or pull gear linkage
@ preload - adjustable from 1 to 40kg
@ automatic sensor calibration- a replacement sensor will be automatically calibrated at power up
@ magic threads- M6 right and left threads can be used in both ends
@ connector - 3-way Super Seal connector to bike ECU or PQ8 kit harness
@ 132mm aluminum rod
@ nut - stud kit
Item 409 - standard Strain Gauge GP SG Switch for MV Agusta models includes;
@ strain gauge/load cell technology - no movable parts with very distinct and precise gear change
@ sensor design - fully sealed and super durable CNC high precision strain less steel sensor
@ switch quickshifter - can be set to close (t1) or open (t2) the loop for upshift
@ adaptive sensing of direction - upshift configurable for push or pull gear linkage
@ preload - adjustable from 1 to 40kg
@ automatic sensor calibration- a replacement sensor will be automatically calibrated at power up
@ magic threads- M6 right and left threads can be used in both ends
@ connector - 3-way Super Seal connector to bike ECU or PQ8 kit harness
@ 132mm aluminum rod
@ nut - stud kit
Item #: COR-412
Condition:
New
Currently our delivery times are 7 to 10 business days from time of order confirmation.
Price: $343.85
520VR46SG120
Description:
In collaboration with D.I.D's official ambassador, Valentino Rossi, the VR46 chain allows you to run "The Doctor's" chain of choice, even with a little Rossi flare!
This series boasts D.I.D’s patented X-Ring seals, designed from our long-standing experience and success with Rossi in MotoGP to give you the best balance of performance and chain life.
Please note Chain be need to be shortened to fit.
This series boasts D.I.D’s patented X-Ring seals, designed from our long-standing experience and success with Rossi in MotoGP to give you the best balance of performance and chain life.
Please note Chain be need to be shortened to fit.
Item #: 7970487
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please note supply-chain related delays
are possible.
Price: $146.50
Description:
Extreme Components Brake calipers heatsink for MV Agusta 1000 F4 (2007/2009) - BPR01G
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: BPR01G
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $193.75
Description:
Extreme Components Brake calipers heatsink for MV Agusta 1000 F4 (2010/2015) - BPR01G
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: BPR01G
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $193.75
Description:
Extreme Components Brake calipers heatsink for MV Agusta 675 F3 (2015/2016) - BPR01G
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: BPR01G
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $193.75
Description:
Extreme Components Brake calipers heatsink for MV Agusta 675 F3 Oro (2012/2016) - BPR01G
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: BPR01G
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $193.75
Description:
Extreme Components Brake calipers heatsink for MV Agusta 800 F3 (2013/2015) - BPR01G
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: BPR01G
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $193.75
Description:
Extreme Components Brake calipers heatsink for MV Agusta F4 1000CC (2017/2020) - BPR01G
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: BPR01G
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $193.75
Description:
Extreme Components Air box pipes for MV Agusta F4 (2015/2020) - CF43000
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: EXT CF43000
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $635.63
Description:
Extreme Components Tank protection for MV Agusta F3 (2012/2020) - CF31800
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CF31800
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $127.13
Description:
Extreme Components Engine protector for MV F3 (2012/2020) - alternator - ALTER F3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER F3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $215.25
Description:
Extreme Components Engine protector for MV F3 (2012/2020) - clutch - CLUTCH F3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH F3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $307.65
Description:
Extreme Components Engine protectors for MV F3 (2012/2020) - alternator + clutch - PROT-ENG F3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG F3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $502.95
Yamaha: R1 04-08, R1 15-22, R6 06-2016, R6 17-22, R3 17-19, R6 Mectronik, R7 2022
Description:
The Chrome Pro 2 comes in a package containing:
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.
Item #: CROR211
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $2,820.00
Description:
MWR Air Tubes for the MV Agusta F3 675/800 (Race & Track) MWR-AT-750
Item #: MWR-AT-750
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $410.95
Description:
MWR High Performance & Race Filter For MV Agusta F3 / Brutale 675 & 800, Rivale, Dragster, Stradale, & Turismo Veloce MC-066-12 MC-066-12-R MC-066-12-HE
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-066-12
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $144.95
Items 1-60 of 86
- Page 1 of 2
- Next