- Home »
- Catalog
HHR Performance » S1000R
Products for:
- Model: S1000R
View Universal items for: S1000R
Browse Products
Cast wheel Replacement Rotobox S1000R/RR/M1000RR 2020-22
Description:
Rotobox BOOST Front Wheel for BMS S1000RR K67
This wheel uses the rotors for the Standard Cast wheels so if ordering for spare wheels you will need to order the Rotors for the Cast wheel fitment
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
This wheel uses the rotors for the Standard Cast wheels so if ordering for spare wheels you will need to order the Rotors for the Cast wheel fitment
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350374
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
Description:
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350300
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
Description:
FGRT Upside Down Front Fork Road & Track FGRT 217
It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The new Road & Track front fork will give you loads of performance, stable damping and fantastic comfort. The new Road & Track front fork features the Öhlins 30 mm Cartridge Kit inside, a winning kit in several national superbike championships.
Compression and rebound adjustments are easily done with compression adjustment in one leg and rebound
adjustment in the other leg. The new front fork gives a big improvement in tire feel, brake support and the general handling of the bike. The outer design has been redesigned to make this front fork even more attractive.
Part number
FGRT 217
Technical data
| Rate N/mm: | 9,0 N/mm |
|---|---|
| Position: | front |
| Mounted spring: | 04744-90 |
| Spring series: | 04744-Serie |
| Packaging unit: | pair |
Notes
Gold outer tubes.
Fits for vehicles
BMW S 1000 R (2014 – 2016)
- ABE (Germany)
BMW S 1000 R (2017 – 2020)
- "ABE" in preparation (Germany)
Download
- Mounting Instructions FGRT 217 English (529,2 KB)
- Owner´s Manual Front Fork FGRT Series Road & Track English (1.895,5 KB)
- Mounting Instructions FGRT 217 German (894,1 KB)
- Owner´s Manual Front Fork FGRT Series Road & Track German (1.352,0 KB)
Item #: FGRT 217
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,599.00
Description:
TTX GP Shock Absorber BM 365
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.
We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!
Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
BM 365
Type Code
T36PR1C1LB
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
L
Adjustable length.
B
Integrated hydraulic spring preload adjuster. Adjuster wheel or hexagon on the adjuster.
Technical data
| Length: | 335 +4/-2 mm |
|---|---|
| Stroke: | 62 mm |
| Rate N/mm: | 75 N/mm |
| Position: | rear |
| Mounted spring: | 21040-21 |
| Packaging unit: | pieces |
Notes
This product can not be used together with the
BMW DDC System. This product can only be
used together with non-electric units.
Fits for vehicles
BMW S 1000 R (2014 – 2020)
- ABE (Germany)
Download
- Mounting Instruction BM 365 English (288,9 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (1.970,2 KB)
- Mounting Instruction BM 365 German (664,8 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (3.112,6 KB)
Item #: BM 365
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,499.00
Description:
Supreme Technology OverSuspension for the BMW S1000RR (2015+) and S1000R (2014+) OVS-STB/BMW1000RR
Item #: OVS-STB/BMW1000RR
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $424.95
Description:
Welcome to the latest development in superbike suspension, introducing the high side saving OVERSUSPENSION from Supreme Technology based in Italy. As seen on the WSBK Barni Racing Ducati V4!
This will fit the BMW S1000RR (2015+) and S1000R (2014+)
This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
This will fit the BMW S1000RR (2015+) and S1000R (2014+)
This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
Item #: OVS-STB/BMW1000RR
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $429.95
S1000RR M1000RR Akrapovic Full System,S-B10E10-APLT
Description:
Alpha Racing Alpha Racing Akrapovic Evolution Line BMW M1000RR 2021 | S1000RR 2019-2021 AK-S-B10E10-APLT
Akrapovic Evolution Line Titanium, BMW S 1000 RR 2019- (K67), M 1000 RR 2021- (K66) and S 1000 R 2021-, full titanium system with carbon end cap
Akrapovic Evolution Line Titanium, BMW S 1000 RR 2019- (K67), M 1000 RR 2021- (K66) and S 1000 R 2021-, full titanium system with carbon end cap
Item #: AR-AK-S-B10E10-APLT
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are
allocated from the next shipment. Please note supply-chain
related delays are possible.
Price: $2,915.00
Description:
Alpha Racing Bleeding valve M8 x1,25, 16 mm red BMW S1000RR 2009-2018,HP4 2012-2014,S1000R 2014-2016,S1000XR 2015-2016 3432A030D00
Bleeding valve M8 x1,25, thread length 16 mm, steel, red cap, fits front brake master cylinder BMW S 1000 RR OEM as well as Brembo Racing M4 monoblock front and rear brake caliper
Bleeding valve M8 x1,25, thread length 16 mm, steel, red cap, fits front brake master cylinder BMW S 1000 RR OEM as well as Brembo Racing M4 monoblock front and rear brake caliper
Item #: 3432A030D00
Condition:
New
Limited Supply: Only 6 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $35.95
Description:
Alpha Racing Brake lever Racing short BMW S1000RR 2009-2016,S1000R 2014-2016,HP4 2012-2014 3272A001C00
Brake lever Racing short, folding, black anodised, adjustable lever position (remote optional), with alpha Racing logo, CNC milled from high quality aluminum, length: 175 mm
Brake lever Racing short, folding, black anodised, adjustable lever position (remote optional), with alpha Racing logo, CNC milled from high quality aluminum, length: 175 mm
Item #: 3272A001C00
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $110.17
Sale: $103.48
Save: 6%
Save: $6.69
Description:
Alpha Racing Front stand aluminium, black BMW HP4 2012-2014, BMW S1000 XR 2015- 2016, BMW S1000 R 2014-2016, BMW S1000 RR 2009-2019- and BMW M1000 RR 2021- 8123A001A01
Front stand aluminium, black anodized, pick-up inside the holes of the fork bottoms, adjustable cursors, with BMW emblem
Front stand aluminium, black anodized, pick-up inside the holes of the fork bottoms, adjustable cursors, with BMW emblem
Item #: 8123A001A01
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $260.93
Description:
Alpha Racing Radiator Cap, 1.8 Bar BMW HP4 2012-2014, BMW HP4 Race 2017-2018, BMW S1000R 2015-2017-, BMW S1000RR 2009-2019- and BMW M1000RR 2021- 17117687715
Radiator cap 1.8 bar, for OEM radiator different models
Radiator cap 1.8 bar, for OEM radiator different models
Item #: 17117687715
Condition:
New
Limited Supply: Only 5 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $40.59
Description:
Additional articles
The flagship of the Akrapovič exhaust system range, used and tested by our top factory teams in motorsport racing. It is simply the finest performance exhaust system available. Each model is unique and dedicated to maximizing the performance of an engine, while reducing overall weight for optimized handling of the whole motorcycle. It is made entirely of titanium. The unique shape of the muffler, with its embossed imprint that run all the way along the exhaust and blend in seamlessly with the hand-crafted carbon fibre endcap, takes design to new levels.
- titanium full system 4:2:1
- muffler with titanium sleeve and carbon end cap
- lambda plug
- without dB-killer (article code AK-V-TUV111)
Comparison to stock (S 1000 RR):
+7,7 kW bei 8400 rpm
+8,9 Nm bei 8400 rpm
-6,7 kg
When installing the evolution system, remapping the ECU is recommended in order to prevent »check engine light« warning signal and achieve optimized performance and throttle response.
On the product image, the system is shown together with optional carbon heat shield (article code AK-P-HSB10E3). Carbon fibre muffler bracket (needed for mounting on standard subframe, if passenger footresrs are removed) is already included within the system. If the alpha Racing racing suframe is mounted we recommend our carbon muffler bracket (article code 1810B001A00).
Note:
This product does not meet emission compliance requirements for street or highway use.
Noise: 104.5 dB at 5500 rpm
Weight: 4.100 kg
Delivery
- titanium full system 4:2:1
- muffler with titanium sleeve and carbon end cap
- lambda plugs
- carbon muffler bracket for OEM subframe
- mounting instructions
Modified vehicle parts
In case of using the alpha Racing subframe the carbon muffler bracket (1810B001A00) must be ordered separately.
The flagship of the Akrapovič exhaust system range, used and tested by our top factory teams in motorsport racing. It is simply the finest performance exhaust system available. Each model is unique and dedicated to maximizing the performance of an engine, while reducing overall weight for optimized handling of the whole motorcycle. It is made entirely of titanium. The unique shape of the muffler, with its embossed imprint that run all the way along the exhaust and blend in seamlessly with the hand-crafted carbon fibre endcap, takes design to new levels.
- titanium full system 4:2:1
- muffler with titanium sleeve and carbon end cap
- lambda plug
- without dB-killer (article code AK-V-TUV111)
Comparison to stock (S 1000 RR):
+7,7 kW bei 8400 rpm
+8,9 Nm bei 8400 rpm
-6,7 kg
When installing the evolution system, remapping the ECU is recommended in order to prevent »check engine light« warning signal and achieve optimized performance and throttle response.
On the product image, the system is shown together with optional carbon heat shield (article code AK-P-HSB10E3). Carbon fibre muffler bracket (needed for mounting on standard subframe, if passenger footresrs are removed) is already included within the system. If the alpha Racing racing suframe is mounted we recommend our carbon muffler bracket (article code 1810B001A00).
Note:
This product does not meet emission compliance requirements for street or highway use.
Noise: 104.5 dB at 5500 rpm
Weight: 4.100 kg
Delivery
- titanium full system 4:2:1
- muffler with titanium sleeve and carbon end cap
- lambda plugs
- carbon muffler bracket for OEM subframe
- mounting instructions
Modified vehicle parts
In case of using the alpha Racing subframe the carbon muffler bracket (1810B001A00) must be ordered separately.
Item #: AK-S-B10E10-APLT
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $2,915.95
Akrapovic Headers BMW S1000RR M1000RR
Description:
Out of stock until October 2022- all orders will be allocated on 1st come first serve basis
Akrapovic Titanium Exhaust Headers BMW S1000RR 2020-2023 E-B10E8 and M1000RR 21-23
power
+7.7 kW at 8550 rpm
torque
+8.8 Nm at 8450 rpm
weight
-6.4 kg
Optional available headers from the finest titanium offer an upgrade to a full system when used with the Akrapovic Slip-On exhaust system. Let your bike stand out with more power, beautiful design, and the unique Akrapovic sound.
Optional headers fit also with Akrapovic standard (first fit) / BMW accessory Akrapovic silencer.
For perfect performance, throttle response and durability, special developed mapping is recommended.
Akrapovic Titanium Exhaust Headers BMW S1000RR 2020-2023 E-B10E8 and M1000RR 21-23
power
+7.7 kW at 8550 rpm
torque
+8.8 Nm at 8450 rpm
weight
-6.4 kg
Optional available headers from the finest titanium offer an upgrade to a full system when used with the Akrapovic Slip-On exhaust system. Let your bike stand out with more power, beautiful design, and the unique Akrapovic sound.
Optional headers fit also with Akrapovic standard (first fit) / BMW accessory Akrapovic silencer.
For perfect performance, throttle response and durability, special developed mapping is recommended.
Item #: E-B10E8
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $2,003.00
Description:
Alpha Racing Reservoir Sock Cover BMW S1000RR 2009-2011,S1000RR 2015-2016,S1000RR 2012-2014,S1000R 2014-2016,HP4 2012-2014,S1000XR 2015-2016 3272A050A00
Reservoir sock cover, black with 3D alpha Racing logo
Reservoir sock cover, black with 3D alpha Racing logo
Item #: 3272A050A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $12.64
Description:
Alpha Racing 2D adaptor harness suspension f. interface module 7470A109A01
2D adaptor harness suspension for interface module, to connect interface module 7470A109A00 to suspension sensors front and rear
2D adaptor harness suspension for interface module, to connect interface module 7470A109A00 to suspension sensors front and rear
Item #: 7470A109A01
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $207.00
Description:
Alpha Racing 2D interface module for HP Race Datalogger BMW S1000RR 7470A109A00
2D interface module for HP Race Datalogger, for connection of spring travel sensors front and rear, lambda probe and other sensors, Lambda probe directly attachable
2D interface module for HP Race Datalogger, for connection of spring travel sensors front and rear, lambda probe and other sensors, Lambda probe directly attachable
Item #: 7470A109A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $690.00
Description:
Alpha Racing 2D suspension kit front DDC BMW S1000R 2013-2016 | S1000RR/HP4 2009-2018 | S1000XR 2015-2016 7470HP4A00
2D suspension kit front DDC, for BMW S 1000 RR 2009-2018 and HP4, for OEM wiring loom, suspension sensor 150 mm
2D suspension kit front DDC, for BMW S 1000 RR 2009-2018 and HP4, for OEM wiring loom, suspension sensor 150 mm
Item #: 7470HP4A00
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $605.68
Description:
Alpha Racing Adaptor for 2D brake sensor 7470A103B01
Adaptor for 2D brake sensor wrench size 14 mm, thread M10x1, to be used for connecting brake pressure sensor 7470A103B00 to master cylinder
Adaptor for 2D brake sensor wrench size 14 mm, thread M10x1, to be used for connecting brake pressure sensor 7470A103B00 to master cylinder
Item #: 7470A103B01
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $69.00
Description:
Alpha Racing Adaptor plate left, rearset BMW S1000RR 2009-2018,HP4 2012-2014,S1000R 2014-2016 4671A004A00
Adaptor plate left side, shift, for alpha Racing footrest system, for BMW S 1000 RR 2009-2011, 2012-2014, 2015-2018 and HP4
Adaptor plate left side, shift, for alpha Racing footrest system, for BMW S 1000 RR 2009-2011, 2012-2014, 2015-2018 and HP4
Item #: 4671A004A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $54.51
Description:
Alpha Racing Add-on radiator kit alpha Racing BMW S1000RR/HP4 2009-2018,S1000R 2014-2016 1711A110A01
Add-on radiator kit alpha Racing, for BMW S 1000 RR, fits behind OEM radiator (fan has to be removed), incl. tubes, connector hoses and clips, reduces water temperature up to 10%
Add-on radiator kit alpha Racing, for BMW S 1000 RR, fits behind OEM radiator (fan has to be removed), incl. tubes, connector hoses and clips, reduces water temperature up to 10%
Item #: 1711A110A01
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $810.60
BMW Wheel Covers
Description:
- 2x carbon wheel cover (left & right side)
- 2x holder for mounting on the fork foot
- 2x ball head (only for M 1000 RR 2023-)
- 2x snap lock, rubber (only for M 1000 RR 2023-)
- 2x holder for mounting on the fork foot
- 2x ball head (only for M 1000 RR 2023-)
- 2x snap lock, rubber (only for M 1000 RR 2023-)
Item #: 4663B009B30
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $1,506.40
Description:
Alpha Racing air filter by BMC for BMW HP4 2012-2014, HP4 Race 2017-2018, S1000R 2014-2017, S1000XR 2015-2016, S1000RR 2009-2011, S1000RR 2015-2018 1372A100A00
alpha Racing air filter by BMC, BMW S1000RR, special filter for better performance
alpha Racing air filter by BMC, BMW S1000RR, special filter for better performance
Item #: 1372A100A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $126.41
Akrapovic connector pipe BMW S1000RR M1000RR
Description:
Alpha Racing Akrapovic collector, titanium BMW S1000RR 2019- And M1000RR 2021- AK-C-B10E5
Akrapovic collector, titanium, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), spare part for Evolution Line full system
Akrapovic collector, titanium, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), spare part for Evolution Line full system
Item #: AK-C-B10E5
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $1,144.43
Description:
Alpha Racing Akrapovic Evolution Line Titanium, BMW S 1000 RR 2019- (K67), M 1000 RR 2021- (K66) and S 1000 R 2021- (K63) AK-S-B10E10-APLT
The flagship of the Akrapovič exhaust system range, used and tested by our top factory teams in motorsport racing. It is simply the finest performance exhaust system available. Each model is unique and dedicated to maximizing the performance of an engine, while reducing overall weight for optimized handling of the whole motorcycle. It is made entirely of titanium. The unique shape of the muffler, with its embossed imprint that run all the way along the exhaust and blend in seamlessly with the hand-crafted carbon fibre endcap, takes design to new levels.
- titanium full system 4:2:1
- muffler with titanium sleeve and carbon end cap
- lambda plug
- without dB-killer (article code AK-V-TUV111)
Comparison to stock (S 1000 RR):
+7,7 kW bei 8400 rpm
+8,9 Nm bei 8400 rpm
-6,7 kg
When installing the evolution system, remapping the ECU is recommended in order to prevent »check engine light« warning signal and achieve optimized performance and throttle response.
On the product image, the system is shown together with optional carbon heat shield (article code AK-P-HSB10E3). Carbon fibre muffler bracket (needed for mounting on standard subframe, if passenger footresrs are removed) is already included within the system. If the alpha Racing racing suframe is mounted we recommend our carbon muffler bracket (article code 1810B001A00).
Note:
This product does not meet emission compliance requirements for street or highway use.
Noise: 104.5 dB at 5500 rpm
Weight: 4.100 kg
The flagship of the Akrapovič exhaust system range, used and tested by our top factory teams in motorsport racing. It is simply the finest performance exhaust system available. Each model is unique and dedicated to maximizing the performance of an engine, while reducing overall weight for optimized handling of the whole motorcycle. It is made entirely of titanium. The unique shape of the muffler, with its embossed imprint that run all the way along the exhaust and blend in seamlessly with the hand-crafted carbon fibre endcap, takes design to new levels.
- titanium full system 4:2:1
- muffler with titanium sleeve and carbon end cap
- lambda plug
- without dB-killer (article code AK-V-TUV111)
Comparison to stock (S 1000 RR):
+7,7 kW bei 8400 rpm
+8,9 Nm bei 8400 rpm
-6,7 kg
When installing the evolution system, remapping the ECU is recommended in order to prevent »check engine light« warning signal and achieve optimized performance and throttle response.
On the product image, the system is shown together with optional carbon heat shield (article code AK-P-HSB10E3). Carbon fibre muffler bracket (needed for mounting on standard subframe, if passenger footresrs are removed) is already included within the system. If the alpha Racing racing suframe is mounted we recommend our carbon muffler bracket (article code 1810B001A00).
Note:
This product does not meet emission compliance requirements for street or highway use.
Noise: 104.5 dB at 5500 rpm
Weight: 4.100 kg
Item #: AK-S-B10E10-APLT
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $3,352.68
Akrapovic E-B10R7 S1000RR Headers
Description:
Optional available headers from the finest stainless steel offer an upgrade to a full system when used with the Akrapovič Slip-On exhaust system. Let your bike stand out with more power, beautiful design, and the unique Akrapovič sound.
Optional headers fit also with Akrapovič standard (first fit) and BMW accessory Akrapovič silencer. 2020-22 BMW S1000RR 2021-2022 S1000R 2021-22 M1000RR
Optional headers fit also with Akrapovič standard (first fit) and BMW accessory Akrapovič silencer. 2020-22 BMW S1000RR 2021-2022 S1000R 2021-22 M1000RR
Item #: AR-AK-E-B10R7
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $1,200.43
Akrapovic E-B10E8 S1000RR Headers
Description:
Optional available headers from the finest titanium offer an upgrade to a full system when used with the Akrapovič Slip-On exhaust system. Let your bike stand out with more power, beautiful design, and the unique Akrapovič sound.
Optional headers fit also with Akrapovič standard (first fit) and BMW accessory Akrapovič silencer. 2020-22 BMW S1000RR 2021-2022 S1000R 2021-22 M1000RR
Optional headers fit also with Akrapovič standard (first fit) and BMW accessory Akrapovič silencer. 2020-22 BMW S1000RR 2021-2022 S1000R 2021-22 M1000RR
Item #: AR-AK-E-B10E8
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain
related delays are possible.
Price: $2,003.00
Akrapovic Header pipe spar part BMW
Description:
Alpha Racing Akrapovic header set, titanium BMW S1000RR 2019- And M1000RR 2021- AK-H-B10E5
Akrapovic header set, titanium, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), spare part for Evolution Line full system
Akrapovic header set, titanium, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), spare part for Evolution Line full system
Item #: AK-H-B10E5
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $1,331.78
Akrapovic exhaust bracket bmw
Description:
Alpha Racing Akrapovic muffler bracket BMW S1000RR 2019- And M1000RR 2021- AK-P-MBB10E1
Akrapovic muffler bracket carbon, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), fits to OEM subframe
Akrapovic muffler bracket carbon, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), fits to OEM subframe
Item #: AK-P-MBB10E1
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $226.03
Description:
Alpha Racing Akrapovic Racing Line, BMW S 1000 RR 2019- (K67), M 1000 RR 2021- (K66) and S 1000 R 2021- (K63) AK-S-B10R5-APLT
The Akrapovič Racing system is designed for riders who demand maximum performance. Racing system is lighter if compared to stock exhaust system and features exceptional production quality, hi-tech materials and of course increased engine performance combined with pure racing sound output. The unique shape of the muffler, with its embossed imprint that run all the way along the exhaust and blend in seamlessly with the hand-crafted carbon fibre endcap, takes design to new levels.
- full system 4:2:1
- muffler with titanium sleeve and carbon end cap
- stainless steel collectors
- lambda plug
- without dB-killer (article code AK-V-TUV111)
Comparison to stock (S 1000 RR):
+7,7 kW bei 8400 rpm
+8,9 Nm bei 8400 rpm
-5,1 kg
When installing the evolution system, remapping the ECU is recommended in order to prevent »check engine light« warning signal and achieve optimized performance and throttle response.
On the product image, the system is shown together with optional carbon heat shield (article code AK-P-HSB10E3). Carbon fibre muffler bracket (needed for mounting on standard subframe, if passenger footresrs are removed) is already included within the system. If the alpha Racing racing suframe is mounted we recommend our carbon muffler bracket (article code 1810B001A00).
Note:
This product does not meet emission compliance requirements for street or highway use.
Noise: 104.5 dB / 5500 rpm
Weight: 5.700 kg
The Akrapovič Racing system is designed for riders who demand maximum performance. Racing system is lighter if compared to stock exhaust system and features exceptional production quality, hi-tech materials and of course increased engine performance combined with pure racing sound output. The unique shape of the muffler, with its embossed imprint that run all the way along the exhaust and blend in seamlessly with the hand-crafted carbon fibre endcap, takes design to new levels.
- full system 4:2:1
- muffler with titanium sleeve and carbon end cap
- stainless steel collectors
- lambda plug
- without dB-killer (article code AK-V-TUV111)
Comparison to stock (S 1000 RR):
+7,7 kW bei 8400 rpm
+8,9 Nm bei 8400 rpm
-5,1 kg
When installing the evolution system, remapping the ECU is recommended in order to prevent »check engine light« warning signal and achieve optimized performance and throttle response.
On the product image, the system is shown together with optional carbon heat shield (article code AK-P-HSB10E3). Carbon fibre muffler bracket (needed for mounting on standard subframe, if passenger footresrs are removed) is already included within the system. If the alpha Racing racing suframe is mounted we recommend our carbon muffler bracket (article code 1810B001A00).
Note:
This product does not meet emission compliance requirements for street or highway use.
Noise: 104.5 dB / 5500 rpm
Weight: 5.700 kg
Item #: AK-S-B10R5-APLT
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $2,330.64
AKrapovic GP Slipon BMW S1000RR M1000RR
Description:
Alpha Racing Akrapovic Slip-On Line Titanium BMW S1000RR 2019- And M1000RR 2021- AK-S-B10SO11-CBT
Akrapovic Slip-On Line Titanium, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), muffler with titanium sleeve
Akrapovic Slip-On Line Titanium, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), muffler with titanium sleeve
Item #: AK-S-B10SO11-CBT
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $1,034.82
Akrapovic replacement muffler system BMW S1000RR M1000RR
Description:
Alpha Racing Akrapovic titanium muffler BMW S1000RR 2019- And M1000RR 2021- AK-M-APL00305T
Akrapovic titanium muffler, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), titanium sleeve and carbon end cap, spare part for full system
Akrapovic titanium muffler, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), titanium sleeve and carbon end cap, spare part for full system
Item #: AK-M-APL00305T
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $1,059.65
Description:
Alpha Racing Allen Head Bolt M8x20 Brake Disc Front BMW S1000RR 2009-2011,S1000RR 2015-2016,S1000RR 2019-2021,S1000R 2014-2016,HP4 2012-2014,M1000RR 2021 0711A008B03
Allen head bolt M8x20, for brake disc front DIN 6912 8.8, zinc-plated, with shaft
weight: 0,001 kg
Allen head bolt M8x20, for brake disc front DIN 6912 8.8, zinc-plated, with shaft
weight: 0,001 kg
Item #: 0711A008B03
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $1.05
Description:
Alpha Racing Allen screw filister head M6x18, brake disc rear BMW S1000RR/HP4 2009-2019 | M1000RR 2021- | S1000R 2014-2016 0711A006D03
Allen screw filister head M6x18, for brake disc rear, ISO 7380, 10.9, zinc-plated
Allen screw filister head M6x18, for brake disc rear, ISO 7380, 10.9, zinc-plated
Item #: 0711A006D03
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $0.69
Description:
Alpha Racing Alternator cover protection, aluminum for BMW HP4 2012-2014, S1000R 2014-20176, S1000RR 2009-2011, S1000RR 2015-2016, 1114A015A10
Alternator cover protection, aluminum cnc machined, for BMW S 1000 RR/R and HP4, incl. mounting parts, black anodised, with alpha Racing Logo
Alternator cover protection, aluminum cnc machined, for BMW S 1000 RR/R and HP4, incl. mounting parts, black anodised, with alpha Racing Logo
Item #: 1114A015A10
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $127.57
Description:
Alpha Racing Anderson plug SB50, 6qmm, red BMW S1000RR/HP4 2009-2016,S1000R 2014-2016,S1000XR 2015-2016 6131A000A01
Anderson plug SB50, 6qmm, red
Anderson plug SB50, 6qmm, red
Item #: 6131A000A01
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $11.48
Description:
Alpha Racing Anderson plug SB50a, 6qmm, grey BMW S1000RR/HP4 2009-2018,S1000R 2014-2017,S1000XR 2015-2017 6131A000A00
Anderson plug SB50a, 6qmm, grey
Anderson plug SB50a, 6qmm, grey
Item #: 6131A000A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $11.48
Description:
Alpha Racing Assembling assistance front axle BMW S1000RR 2009-2021,S1000R 2014-2016,M1000RR 2021- 7464A006A00
Assembling assistance for mounting front axle, wrench size 24 mm with hexagon socket set screw with spring loaded ball, aluminum anodised, with alpha Racing Logo
Assembling assistance for mounting front axle, wrench size 24 mm with hexagon socket set screw with spring loaded ball, aluminum anodised, with alpha Racing Logo
Item #: 7464A006A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $26.68
Description:
Alpha Racing Assembling assistance rear axle BMW S1000RR 2009-2021,S1000R 2014-2016 7464A005A00
Assembling assistance for mounting rear axle, aluminum anodised, with alpha Racing Logo
Assembling assistance for mounting rear axle, aluminum anodised, with alpha Racing Logo
Item #: 7464A005A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $49.86
Description:
Alpha Racing Base plate left, rearset BMW S1000RR/HP4 2009-2014,S1000R 2014-2016 4671A003A00
Base plate left side, shift, for alpha Racing footrest system, for BMW S 1000 RR 2009-2011, 2012-2014 and HP4
Base plate left side, shift, for alpha Racing footrest system, for BMW S 1000 RR 2009-2011, 2012-2014 and HP4
Item #: 4671A003A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $86.98
Description:
Alpha Racing Base plate right, rearset BMW S1000RR/HP4 2009-2014,S1000R 2014-2016 4671A002A00
Base plate right side, brake, for alpha Racing footrest system, for BMW S 1000 RR 2009-2011, 2012-2014 and HP4
Base plate right side, brake, for alpha Racing footrest system, for BMW S 1000 RR 2009-2011, 2012-2014 and HP4
Item #: 4671A002A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $86.98
Description:
Alpha Racing Bleeding valve M10 x1, 14 mm black BMW S1000RR 2009-2016,HP4 2012-2014,S1000R 2014-2016,S1000XR 2015-2016 3432A031B00
Bleeding valve M10 x1, thread length 14 mm, steel, black cap, fits rear brake caliper BMW S 1000 RR as well as Brembo Racing front master cylinder 19RCS and 19x18
Bleeding valve M10 x1, thread length 14 mm, steel, black cap, fits rear brake caliper BMW S 1000 RR as well as Brembo Racing front master cylinder 19RCS and 19x18
Item #: 3432A031B00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $35.95
Description:
Alpha Racing Bleeding valve M10 x1, 14 mm blue BMW S1000RR 2009-2016,HP4 2012-2014,S1000R 2014-2016,S1000XR 2015-2016 3432A031A00
Bleeding valve M10 x1, thread length 14 mm, steel, blue cap, fits rear brake caliper BMW S 1000 RR as well as Brembo Racing front master cylinder 19RCS and 19x18
Bleeding valve M10 x1, thread length 14 mm, steel, blue cap, fits rear brake caliper BMW S 1000 RR as well as Brembo Racing front master cylinder 19RCS and 19x18
Item #: 3432A031A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $35.95
Description:
Alpha Racing Bleeding valve M10 x1, 14 mm gold BMW S1000RR 2009-2016,HP4 2012-2014,S1000R 2014-2016,S1000XR 2015-2016 3432A031C00
Bleeding valve M10 x1, thread length 14 mm, steel, gold cap, fits rear brake caliper BMW S 1000 RR as well as Brembo Racing front master cylinder 19RCS and 19x18
Bleeding valve M10 x1, thread length 14 mm, steel, gold cap, fits rear brake caliper BMW S 1000 RR as well as Brembo Racing front master cylinder 19RCS and 19x18
Item #: 3432A031C00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $35.95
Description:
Alpha Racing Bleeding valve M10 x1, 14 mm, red BMW S1000RR 2009-2018,HP4 2012-2014,S1000R 2014-2016,S1000XR 2015-2016 3432A031D00
Bleeding valve M10 x1, thread length 14 mm, steel, red cap, fits rear brake caliper BMW S 1000 RR as well as Brembo Racing front master cylinder 19RCS and 19x18
Bleeding valve M10 x1, thread length 14 mm, steel, red cap, fits rear brake caliper BMW S 1000 RR as well as Brembo Racing front master cylinder 19RCS and 19x18
Item #: 3432A031D00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $33.91
Description:
Alpha Racing Bleeding valve M8 x1,25, 16 mm black BMW S1000RR 2009-2018,HP4 2012-2014,S1000R 2014-2016,S1000XR 2015-2016 3432A030B00
Bleeding valve M8 x1,25, thread length 16 mm, steel, black cap, fits front brake master cylinder BMW S 1000 RR OEM as well as Brembo Racing M4 monoblock front and rear brake caliper
Bleeding valve M8 x1,25, thread length 16 mm, steel, black cap, fits front brake master cylinder BMW S 1000 RR OEM as well as Brembo Racing M4 monoblock front and rear brake caliper
Item #: 3432A030B00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $33.91
Description:
Alpha Racing Bleeding valve M8 x1,25, 16 mm blue BMW S1000RR 2009-2018,HP4 2012-2014,S1000R 2014-2016,S1000XR 2015-2016 3432A030A00
Bleeding valve M8 x1,25, thread length16 mm, steel, blue cap, fits front brake master cylinder BMW S 1000 RR OEM as well as Brembo Racing M4 monoblock front and rear brake caliper
Bleeding valve M8 x1,25, thread length16 mm, steel, blue cap, fits front brake master cylinder BMW S 1000 RR OEM as well as Brembo Racing M4 monoblock front and rear brake caliper
Item #: 3432A030A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $35.95
Description:
Alpha Racing Bleeding valve M8 x1,25, 16 mm gold BMW S1000RR 2009-2018,HP4 2012-2014,S1000R 2014-2016,S1000XR 2015-2016 3432A030C00
Bleeding valve M8 x1,25, thread length 16 mm, steel, gold cap, fits front brake master cylinder BMW S 1000 RR OEM as well as Brembo Racing M4 monoblock front and rear brake caliper
Bleeding valve M8 x1,25, thread length 16 mm, steel, gold cap, fits front brake master cylinder BMW S 1000 RR OEM as well as Brembo Racing M4 monoblock front and rear brake caliper
Item #: 3432A030C00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $35.95
Description:
Alpha Racing BMC Air filter Type E BMW HP4 2012-2014, BMW S1000 R 2014-2016, BMW S1000 RR 2009-2019- and BMW M1000 RR 2021- 0751A100A00
Cleaning kit racing air filter, contains cleaner and filter oil
Cleaning kit racing air filter, contains cleaner and filter oil
Item #: 0751A100A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $24.36
Description:
Alpha Racing Bolt Kit Front Caliper Titanium BMW S1000RR 2009-2011,S1000RR 2015-2018,S1000RR 2019-2021,S1000R 2014-2016,S1000XR 2015-2016,HP4 2012-2014, 3411T064A00
Bolt kit front caliper, titanium, for BMW Superbike models, OEM caliper in combination with OEM forkleg, 4 pieces, also for Brembo M4 and Brembo GP4-RX
Bolt kit front caliper, titanium, for BMW Superbike models, OEM caliper in combination with OEM forkleg, 4 pieces, also for Brembo M4 and Brembo GP4-RX
Item #: 3411T064A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $127.57
Description:
Alpha Racing Bracket for suspension sensor for BMW HP4 2012-2014, S1000R 2014-2017,S1000RR 2009-2011, S1000RR 2015-2018 3142A054A00
Bracket for suspension sensor front fork, right side mounted, made from carbon
Bracket for suspension sensor front fork, right side mounted, made from carbon
Item #: 3142A054A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $53.57
Description:
Alpha Racing Bracket wheel speed sensor ABS/DTC f. racing rim for BMW HP4 2012-2014, S1000RR 2009-2011, S1000RR 2015-2016, S1000R 2014-2016, S1000XR 2015-2016, 3631A056A00
Bracket wheel speed sensor ABS/DTC for racing rim BMW S1000RR, stainless steel
Bracket wheel speed sensor ABS/DTC for racing rim BMW S1000RR, stainless steel
Item #: 3631A056A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $62.10
Description:
Alpha Racing Brake Disc Rear 220 x 5 BMW S1000RR 2009-2011,S1000RR 2015-2016,S1000RR 2019-,S1000XR 2015-2016,S1000R 2014 - 2016,HP4 2012 - 2014,M1000RR 2021 3421A110A00
Rear brake disc 220 x 5 mm, full floating, for BMW OEM carbon / forged wheels and aluminium racing wheel set (OZ Motorbike), incl. Floater kit
Rear brake disc 220 x 5 mm, full floating, for BMW OEM carbon / forged wheels and aluminium racing wheel set (OZ Motorbike), incl. Floater kit
Item #: 3421A110A00
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $235.99
Description:
Alpha Racing Brake fluid Brembo LCF 600 plus DOT4 S1000RR/HP4 2009-2016,M1000RR 2021-,S1000R 2014-2016,S1000XR 2015-2016 3311A996A00
Brake fluid Brembo LCF 600 plus DOT4, 0,5 liter bottle
Brake fluid Brembo LCF 600 plus DOT4, 0,5 liter bottle
Item #: 3311A996A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $37.12
Description:
Alpha Racing Brake lever Racing blade long, for Brembo 19RCS (WILL NOT FIT CORSA CORTA) BMW S1000RR/HP4 2009-2019,S1000R 2014-2016,S1000XR 2015-2016,M1000RR 2021- 3272A002A00
Brake lever Racing blade long, for Brembo master cylinder 19RCS, black anodized, optional with remote adjuster available
Brake lever Racing blade long, for Brembo master cylinder 19RCS, black anodized, optional with remote adjuster available
Item #: 3272A002A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $57.86
Description:
Alpha Racing Brake lever racing long complete, for Brembo 19RCS BMW S1000RR/HP4 2009-2018,S1000R 2014-2017,S1000XR 2015-2017,M1000RR 2021- 3272A007A00
Brake lever racing long complete, for Brembo master cylinder 19RCS, folding, black anodised
Brake lever racing long complete, for Brembo master cylinder 19RCS, folding, black anodised
Item #: 3272A007A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $208.74
Description:
Alpha Racing Brake lever racing long, foldable BMW S1000RR/HP4 2009-2021 | M1000RR 2021- | S1000R 2014-2017 3272B005A00
Brake lever racing long, foldable, for BMW Superbike models, adjustable lever position length 200 mm
Brake lever racing long, foldable, for BMW Superbike models, adjustable lever position length 200 mm
Item #: 3272B005A00
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $127.57
Description:
Alpha Racing Brake pad set Brembo Racing Z04, front, 2009-2018 3411A200A00
Brake pad set Brembo Racing Z04, front for BMW S 1000 RR 2009-2018 (K46), 4 pads per unit, pad thickness 8 mm, back plate thickness 4,5 mm, for OEM brake caliper
Brake pad set Brembo Racing Z04, front for BMW S 1000 RR 2009-2018 (K46), 4 pads per unit, pad thickness 8 mm, back plate thickness 4,5 mm, for OEM brake caliper
Item #: 3411A200A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $289.91
Description:
Alpha Racing Brake pad set Duo Carbon, front BMW S1000RR 2009-2018,S1000R 2014-2016 3411A111C00
Brake pad set Duo Carbon (DC10), front, for BMW S 1000 RR 2009-2018 (K46), 4 pads per unit, pad thickness 8,7 mm, plate thickness 4,5 mm
Brake pad set Duo Carbon (DC10), front, for BMW S 1000 RR 2009-2018 (K46), 4 pads per unit, pad thickness 8,7 mm, plate thickness 4,5 mm
Item #: 3411A111C00
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $83.49
Description:
Alpha Racing Brake pad set Duo Sinter Racing, front BMW S1000RR 2009-2018,S1000R 2014-2016 3411A110B00
Brake pad set Duo Sinter Racing, front, for BMW S 1000 RR 2009-2018 (K46), 4 pads per unit, pad thickness 8,7 mm, plate thickness 4,5 mm
Brake pad set Duo Sinter Racing, front, for BMW S 1000 RR 2009-2018 (K46), 4 pads per unit, pad thickness 8,7 mm, plate thickness 4,5 mm
Item #: 3411A110B00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $193.67
Description:
Alpha Racing Brembo radial master cylinder 19RCS BMW S1000RR/HP4 2009-2018,S1000R 2014-2017,S1000XR 2015-2017,M1000RR 2021- 3271A013A00
Brembo radial master cylinder 19RCS, CNC machined from forged aluminum, adjustable ratio 18 or 20 mm, incl. ABE
Brembo radial master cylinder 19RCS, CNC machined from forged aluminum, adjustable ratio 18 or 20 mm, incl. ABE
Item #: 3271A013A00
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $425.04