- Home »
- Catalog
HHR Performance » 2021, RSV4/RF
Products for:
- Year: 2021
- Model: RSV4/RF
View Universal items for: 2021 RSV4/RF
Browse Products
Items 1-60 of 62
- Page 1 of 2
- Next
Description:
AiM SOLO 2 DL Aprilia RSV4 / Tuono V4 ECU interface harness Aprilia RS 660
For these Aprilia models:
RSV4 RR/RF from 2017
RSV4 1100 from 2019
Tuono V4 RR/Factory from 2017
For these Aprilia models:
RSV4 RR/RF from 2017
RSV4 1100 from 2019
Tuono V4 RR/Factory from 2017
Item #: V02589090
Condition:
New
Limited Supply: Only 1 Left!
Aim Supply has been severely affected due to material shortages and most products are currently on a 3 month delivery date. Please send us an email
request to find out ETAs.
Price: $115.00
RSV4 RSV4EE APRC/RF Tuono V4 1100 Factory RSV1000R RSV Millie
Description:
Rotobox BOOST Symmetric Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600714
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,410.00
Description:
TTX GP Shock Absorber AP 468
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.
We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!
Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
AP 468
Type Code
T36PR1C1LB
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
B
Integrated hydraulic spring preload adjuster. Adjuster wheel or hexagon on the adjuster.
Technical data
| Position: | rear |
|---|---|
| Packaging unit: | pieces |
Fits for vehicles
Download
- Mounting Instruction Öhlins Motorcycle AP 468 (English) (317,8 KB)
- Owner´s Manual Öhlins Motorcycle TTX GP shock absorber Road Track (English) (1.970,2 KB)
- Mounting Instruction Öhlins Motorcycle AP 468 (German) (306,4 KB)
- Owner´s Manual Öhlins Motorcycle TTX GP shock absorber Road Track (German) (3.112,6 KB)
Item #: AP 468
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,499.00
RSV4,carbonin,carbon fiber,bodywork,fairing
Description:
Parts Included In Complete Race Fairing:
Upper Race Fairing (6 Dzus)
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (2 Dzus)
Single Race Seat (2 Pcs) There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Upper Race Fairing (6 Dzus)
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (2 Dzus)
Single Race Seat (2 Pcs) There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CA5200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,065.59
Description:
Aluminum rearsets Aprilia RSV4 RF - Tuono V4 (street and race) 17-23 A005S & A005SR
Item #: A005S
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $597.80
Attack Brake lever guard
Description:
ATTACK PERFORMANCE BRAKE LEVER GUARD KIT, BLACK 901132B
MADE IN USA To Fit with Attack Clipon Tubes Please Note these DO not fit with all aftermarket clipons At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA To Fit with Attack Clipon Tubes Please Note these DO not fit with all aftermarket clipons At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 901132B
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $162.50
Description:
ATTACK PERFORMANCE REAR SET KIT, APRILIA RSV4 17- , TUONO 17- , BLACK 712110B
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 712110B
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $645.50
Description:
ATTACK PERFORMANCE REAR SET KIT, APRILIA RSV4 17- , TUONO 17- , BLACK (REPLACEMENT PARTS) 712110BE
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 712110BE
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Description:
Bonamici Racing Aluminium Dashboard Protection Aprilia RSV4 Factory / Tuono V4 2021 - 2023 DCP13
Worried about potential damage happening to your beautiful Aprilia RSV4 / Tuono V4 instrument cluster? Look no further as Bonamici has released this specifically designed for the latest RSV4 / Tuono V4 to help protect your dash from anything unwanted touching the expensive TFT screen, leading to potential damage. Manufactured from Billet Aluminium which is suitable for absorbing shocks while featuring a plexi-glass protective panel which is treated to an anti-fog finish, to ensure your dashboard is visible in all conditions.
Worried about potential damage happening to your beautiful Aprilia RSV4 / Tuono V4 instrument cluster? Look no further as Bonamici has released this specifically designed for the latest RSV4 / Tuono V4 to help protect your dash from anything unwanted touching the expensive TFT screen, leading to potential damage. Manufactured from Billet Aluminium which is suitable for absorbing shocks while featuring a plexi-glass protective panel which is treated to an anti-fog finish, to ensure your dashboard is visible in all conditions.
Item #: DCP13
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $209.89
Description:
Bonamici Racing Aluminium Handlebars Diameter 51 mm lifted SM51
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Item #: SM51
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $267.03
RS660 Clipons
Description:
Bonamici Racing Aluminium Handlebars Diameter 51 mm lifted Aprilia RSV4 2021 | RS 660 SM51A
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Item #: SM51A
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $267.03
Description:
Bonamici Racing Aluminium Handlebars Diameter 51 mm unlifted SM51B
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Item #: SM51B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $267.03
Description:
Bonamici Racing Aluminum chain adjuster Aprilia RSV4-RSV4 Factory-Tuono V4 21-23 CHAD13_BK
Bonamici Racing is an Italian manufacturer of CNC machined performance parts such as rearsets, engine covers, chain adjusters, triple clamps, dashboard covers, clip-ons, levers, chain protectors, etc. Bonamici Racing is supplier to numerous teams in e.g. the World Superbikes (WSBK) and Endurance World Campionship (EWC). Everything is made in Italy.
Bonamici Racing is an Italian manufacturer of CNC machined performance parts such as rearsets, engine covers, chain adjusters, triple clamps, dashboard covers, clip-ons, levers, chain protectors, etc. Bonamici Racing is supplier to numerous teams in e.g. the World Superbikes (WSBK) and Endurance World Campionship (EWC). Everything is made in Italy.
Item #: CHAD13_BK
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $273.63
Description:
Bonamici Racing Glass Spare Part Aprilia RSV4 Factory / Tuono V4 SP_DCP13
Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.
Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.
Item #: SP_DCP13
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $20.88
Description:
Bonamici Racing Glass Spare Part Aprilia RSV4 | Tuono V4 SP_DCP06
Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.
Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.
Item #: SP_DCP06
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $20.88
Brembo 17RCS Corta Crsa RR
Description:
17RCS CORSA CORTA RR – Race Replica Radial master cylinder Suited for Bikes that come with Brembo Calipers or 34mm pistons
Many new features have been introduced for this new radial brake master cylinder, the closest to those used in top motorbike racing. Machined from billet, like the master cylinder used in MotoGP and SBK, the design of the new Brembo 17RCS CORSA CORTA RR has been modified to make it lighter and even more similar to the racing versions. The hard oxidized finish, in titanium grey, ensures outstanding wear resistance and extremely low friction between moving parts. It comes in a darker color than the previous version, precisely because of the type of treatment, making it even more similar to the versions used in Moto2 and Moto3.
Many new features have been introduced for this new radial brake master cylinder, the closest to those used in top motorbike racing. Machined from billet, like the master cylinder used in MotoGP and SBK, the design of the new Brembo 17RCS CORSA CORTA RR has been modified to make it lighter and even more similar to the racing versions. The hard oxidized finish, in titanium grey, ensures outstanding wear resistance and extremely low friction between moving parts. It comes in a darker color than the previous version, precisely because of the type of treatment, making it even more similar to the versions used in Moto2 and Moto3.
Item #: 110E71140
Condition:
New
Pre - Order
The new RR's are expected to arrive end of October. Orders placed now will be allocated in order of date ordered
Price: $695.00
Description:
Listing is for 2 pad, which is 1 caliper worth
Z04 dedicated racing compound
Pads are 7.9 mm thick total
Replacement from part number 107A48649
*for Brembo M4 M50 GP4RS GP4RX and .484 Cafe Calipers
Z04 dedicated racing compound
Pads are 7.9 mm thick total
Replacement from part number 107A48649
*for Brembo M4 M50 GP4RS GP4RX and .484 Cafe Calipers
Item #: 107A48639
Condition:
New
Limited Supply: Only 1 Left!
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $139.00
Description:
Replacement Tail unit
Item #: A5300AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $285.37
Description:
RSV4 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM550A
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $238.70
520 DID chain
Description:
D.I.D ER Series Exclusive 520 ERV7 Racing Chain 120 Link
520ERV7120ZB
-Premium Road Racing Chain
-Features gold color plates
-Tensile strength: 8,800 lbs.
520ERV7120ZB
-Premium Road Racing Chain
-Features gold color plates
-Tensile strength: 8,800 lbs.
Item #: 520ERV7120ZB
Condition:
New
Limited Supply: Only 3 Left!
If no inventory is listed above, please feel free to contact us for ETA from manufacturer.
Price: $253.99
Description:
Extreme Components Brake calipers heatsink for Aprilia RSV4/RF (2009/2020) - BPR01G
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: BPR01G
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $193.75
Description:
Extreme Components Brake lever for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020) - PED-GP EVO LFR RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LFR RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $124.69
Description:
Extreme Components Brake side monolithic plate for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020) - PED-GP EVO MON DX RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO MON DX RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $157.50
APRILIA RSV4 1100 FACTORY / TUONO V4 1100 FACTORY (2021/2022)
Description:
Extreme Components SWINGARM PROTECTION FOR APRILIA RSV4 1100 FACTORY / TUONO V4 1100 FACTORY (2021/2022) (GLOSSY TRANSPARENT)
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CA1805
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $352.50
Description:
Extreme Components Swingarm protection for Aprilia RSV4 / RF (2009/2020) - CA1755
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CA1755
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $296.63
Description:
Extreme Components Engine protector for Aprilia RSV4 RF (2009/2020) - alternator - ALTER RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $145.75
Description:
Extreme Components Engine protector for Aprilia RSV4 RF (2009/2020) - clutch - CLUTCH RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $265.00
CA1775 carbon fiber fender
Description:
Carbon fiberfront fender fits also on Aprilia RS660 & Tuono 660.
Item #: CA1775
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $331.88
Description:
Extreme Components Gear Shift lever for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020)(reverse shifting) - PED-GP EVO LCR RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LCR RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $82.69
Description:
Extreme Components Gear Shift lever for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020)(standard shifting) - PED-GP EVO LCD RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LCD RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $82.69
Description:
Extreme Components Gear side monolithic plate for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2021) - PED-GP EVO MON SX RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO MON SX RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $157.50
Carbon Clutch Lever Guard
Description:
Extreme Components GP EVO Carbon Fiber Clutch Lever Guard FPLEVO
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube
Item #: FPLEVO
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $223.13
Aprilia Tuono V4 1100 factory hugger
Description:
Frame and swingarm covers, front and rear mudguard fit on Aprilia RSV4 1100 Factory and as well as on Aprilia Tuono V4 1100 factory (both models 2021/2022).
Item #: CA1785
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $358.38
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2017/2020) (reverse shifting) with carbon fiber heel guard (silver) - PED-GP EVO RSV4 B LCR RSV4 S
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV4 B LCR RSV4 S
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $600.75
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2017/2020) (standard shifting) with carbon fiber heel guard (black) - PED-GP EVO RSV4 C LCD RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV4 C LCD RSV4 B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $600.75
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2017/2020) (standard shifting) with carbon fiber heel guard (silver) - PED-GP EVO RSV4 B LCD RSV4 S
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV4 B LCD RSV4 S
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $600.75
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2017/2020) (reverse shifting) with aluminium heel guard (black) - PED-GP EVO RSV4 LCR RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV4 LCR RSV4 B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $560.25
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2017/2020) (standard shifting) with aluminium heel guard (black) - PED-GP EVO RSV4 LCD RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV4 LCD RSV4 B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $560.25
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2017/2020) (reverse shifting) with carbon fiber heel guard (black) - PED-GP EVO RSV4 C LCR RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV4 C LCR RSV4 B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $600.75
Rsv4 Tall Race screen
Description:
Extreme Components Colorless racing windscreen high protection for Aprilia RSV 4 (2015/2020) (HP) - PRSV418 HP
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PRSV418 HP
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $119.95
Rsv4 Tall Race screen
Description:
Extreme Components Colorless racing windscreen high protection for Aprilia RSV 4 2021 and newer (HP) - PRSV421 HP
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PRSV421 HP
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $119.95
RSV4 100 bodywork
Item #: APR-RSV4-03
Condition:
New
Price: $1,031.00
RSV4 1100 Tank Cover
Item #: APR-RSV4-02
Condition:
New
Price: $223.75
Yamaha: R1 04-08, R1 15-22, R6 06-2016, R6 17-22, R3 17-19, R6 Mectronik, R7 2022
Description:
The Chrome Pro 2 comes in a package containing:
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.
Item #: CROR211
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $2,820.00
Description:
LighTech "R" Version Ajustable Rear Sets Reverse Shifting Aprilia RSV4/ Tuono V4 2018-2021 FTRAP006R
"R" Version Ajustable Rear Sets Reverse Shifting
WorldSBK quality parts Made in Italy
"R" Version Ajustable Rear Sets Reverse Shifting
WorldSBK quality parts Made in Italy
Item #: FTRAP006R
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $902.40
Description:
MIVV Slip-on DELTA RACE CARBON Exhaust For Aprilia RSV4 2021 - 2023 A.015.SDRC
Item #: A.015.SDRC
Condition:
New
Order Processed within 24-48 hours and ships directly from our supplier. Please do not choose express shipping as an option because it will not be shipped Express. All exhausts ship Ground
Price: $694.10
Description:
MIVV Slip-on MK3 Carbon Exhaust For Aprilia RSV4 2017 - 2023 A.016.SM3C
Item #: A.016.SM3C
Condition:
New
Order Processed within 24-48 hours and ships directly from our supplier. Please do not choose express shipping as an option because it will not be shipped Express. All exhausts ship Ground
Price: $292.60
Description:
MIVV Slip-on MK3 Carbon Exhaust For Aprilia RSV4 2021 - 2023 A.015.SM3C
Item #: A.015.SM3C
Condition:
New
Order Processed within 24-48 hours and ships directly from our supplier. Please do not choose express shipping as an option because it will not be shipped Express. All exhausts ship Ground
Price: $292.60
Description:
MWR Performance Filter For Aprilia RSV4 RR / RF / Factory (2015+) MC-010-15
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-010-15
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $194.95
Description:
MWR Racing WSBK Air Filter for the Aprilia RSV4 RR / RF / Factory (2015+) MC-010-15/WSBK
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-010-15/WSBK
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $224.95
Left Hand Brake
Description:
Qnium Radial Rear Left Hand Brake Master Cylinder 12mm
Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.
These high quality brake levers can be placed both above and below the lever of the clutch.
Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.
Made in Netherlands
Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.
These high quality brake levers can be placed both above and below the lever of the clutch.
Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.
Made in Netherlands
Item #: 104602
Condition:
New
On-hand inventory ships within 24 hours. No Returns on Clearance items all sales are final
Price: $742.00
Thumb Brake
Description:
Qnium Radial Rear Thumb Brake Master Cylinder 12mm
The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.
Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.
Made in The Netherlands
The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.
Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.
Made in The Netherlands
Item #: 106977
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. Due to material shortages we have been seeing up to 6 weeks on resupply. We try to keep this product in
stock so grab it while we have it. Orders placed will be allocated
to incomming stock.
Price: $799.00
Description:
*NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
Item #: R70600B714
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,617.00
Description:
Samco Sport 10 Piece OEM Replacement Silicone Radiator Coolant Hose Kit Aprilia RSV4 / RF / RR 2009 - 2021 APR-6
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black, red and gunmetal grey.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black, red and gunmetal grey.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: APR-6
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $234.95
Description:
Samco Sport 2 Piece Oil Cooler Silicone Hose Kit Aprilia RSV4 / RF / RR 2016 - 2021 APR-14
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in black, blue and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in black, blue and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: APR-14
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $78.95
Description:
Samco Sport 5 Piece Thermostat Bypass Silicone Radiator Coolant Hose KitAprilia RSV4 / RF / RR 2009 - 2021 APR-11
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue, black and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: APR-11
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to order with an 6–8-week ETA
Price: $183.95
RSV4 1100 Stealth Mirrors
Description:
Stealth Aprilia RSV4 1100/Factory (2021 - 22) | RS 660 (2020 - 22) BSS070
From racing experience and aeronautical inspiration comes the Rizoma Stealth Mirror. Specifically designed for sport bikes. It consists of a fixed part, which fits directly to the fairing, and a movable part, which acts as a mirror glass holder. Thanks to a rotating system the two parts get aligned so in the closed position the mirror becomes an aerodynamic foil Wing!
Made of billet aluminum, it has a convex glass surface to provide a wider viewing angle and is available in three different anodized colors.
Flip it up to ride, flip it down when you race or if your parked up at bike night!
360 Deg Product Viewer
Item #: BSS070
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $479.00
RSV4 Suter Clutch
Description:
Suter Racing Suterclutch Aprilia Rsv4 09-21 004-49002
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
Item #: 004-49002
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $1,050.00
Sale: $945.00
Save: 10%
Save: $105.00
Description:
Teknofibra Extra Light Thermal Reflective Belly Pan Kit 30"x12"' .8mm Thickness 0121710638
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
Item #: 0121710638
Condition:
New
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any
questions.
Price: $79.38
Description:
TIGHTAILS APRILIA RSV4 09'+ SUBFRAME APRRSV4SUB
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: APRRSV4SUB
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $473.00
Items 1-60 of 62
- Page 1 of 2
- Next