HHR Performance » Brakes

Description: Replacement Rotor bolts for the front rotors for the following models
Motorcycle BMW HP4 12-14
Motorcycle BMW S1000RR 15-18 (2019) US Spec not 2020

Description:

Description: Pre Drilled for Safety wire for the use of securing your brake caliper bolts. which is a requirement for racing organisations
These are Titanium saving weight over oem and stainless steel

Description: Titanium Front Brake Caliper Mount Bolt Kit Race Spec

Description: Qnium Radial Rear Left Hand Brake Master Cylinder 12mm

Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.

These high quality brake levers can be placed both above and below the lever of the clutch.

Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.

Made in Netherlands

Description: Qnium Rear Brake Master Cylinder 12mm Piston for MX or Supermoto w/ 40mm


*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!


-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Threaded mounting points
-40mm Mounting Distance
-Bleed Nipple
-Banjo Connection: Rear foot brake is rear banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Connection Sensor: M10x1
-12mm Piston



Made In Netherlands

Description: Qnium Rear Brake Master Cylinder Top Side 12mm piston w/ 40mm mount 1052300

*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!

Typically seen:
Brembo = 40mm Mounting Distance without integrated pushrod (European bikes)
Nissin = 50mm Mounting Distance with integrated pushrod (Japanese bikes)

-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Banjo Connection: Rear foot brake is top banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Banjo Type: M10x1
-40mm Mounting Distance
-12mm Piston
-Available with our without threaded push rod, please verify your type of existing rear master cylinder before purchasing. If you have any questions please feel free to reach out!

This high quality rear brake master cylinder has been specially developed for people who want to keep the rear foot brake in addition to the Qnium thumb Brake or Left Hand brake. These rear brake master cylinder comes with an extra banjo connection for the Qnium thumb brake or Left Hand brake. Of course the Qnium Rear thumb brake or Left Hand brake can also be mounted directly on the rear brake caliper without a rear brake master cylinder.

Used in Moto2, Moto3, and in other FIM world championships

Made In Netherlands

Description: Qnium Rear Brake Master Cylinder Top Side 12mm piston w/ 50mm mount + Push Rod 105077

*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!

Typically seen:
Brembo = 40mm Mounting Distance without integrated pushrod (European bikes)
Nissin = 50mm Mounting Distance with integrated pushrod (Japanese bikes)

-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Banjo Connection: Rear foot brake is Top banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Banjo Type: M10x1
-50mm Mounting Distance
-12mm Piston
-Comes with integrated pushrod

This high quality rear brake master cylinder has been specially developed for people who want to keep the rear foot brake in addition to the Qnium thumb Brake or Left Hand brake. These rear brake master cylinder comes with an extra banjo connection for the Qnium thumb brake or Left Hand brake. Of course the Qnium Rear thumb brake or Left Hand brake can also be mounted directly on the rear brake caliper without a rear brake master cylinder.

Used in Moto2, Moto3, and in other FIM world championships

Made In Netherlands

Description: TK Dischi EVO Front Brake Rotors 300mm 2013-2020 Kawasaki ZX-6R 636

***Made specifically for the ZX-6R, will not fit the 636! for ZX636 use K01E 310 mm rotors

300mm x 5.75mm

-Sold as a set Left and Right
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-This would be the correct fit for Aftermarket wheels such as Rotobox Dymag or OZ wheels.
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct

Description: TK Dischi EVO Front Brake Rotors 310mm 2013-2020 Kawasaki ZX-636

310mm rotors are SPECIFICALLY FOR THE NINJA ZX 636!

310mm x 5.75mm

-Sold as a set Left and Right
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-This would be the correct fit for Aftermarket wheels such as Rotobox Dymag or OZ wheels.
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct

Description: TK Dischi Evo Ventilated Floating Rotors for Competition use only to fit BMW S1000RR HP front wheel Fits HP wheel for 2014 HP4 2015-19 S1000rr K46 (Does not fit 2020+ S1000RR K67 Model)
-320mm x 5.75mm
-Bobbin-Less
-Exclusive Carrier Technology
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

Description: TK Dischi Evo 330mm Ventilated Floating Rotors for Competition use only to fit Kawasaki ZX10R Wheel from 2016-2020
-330mm x 5.75mm
-This would be the correct fit for Aftermarket wheels such as Rotobox, Dymag or OZ Wheels.
-This will not fit the ZX10RR Marchesini Wheel
-Bobbin-Less
-Exclusive Carrier Technology
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct

Description: TK Dischi Evo Ventilated Floating Rotors for Competition use only
Fits 2020 throu 23 K67 BMW S1000RR M or Carbon front wheel and M1000RR K66
-320mm x 5.75mm
-Bobbin-Less
-Exclusive Carrier Technology
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

Description: TK Dischi Freno Evo 330mm x 5.75mm Self Ventilating Floating Rotors for Competition use only to fit Aprilia RSV4 RF from 2017-2020 and the RSV4 and Tuono 1100

-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct

Description: TK Dischi Evo 5.75mm Ventilated Floating Rotors for Competition for the 2021 CBR1000RR-R SP comes with a Blue Hub on one side and a Red Hub on the other side.
-Bobbin-less
-Exclusive Carrier Technology
-More Mounting points than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct

Description: TK Dischi Evo 330mm Ventilated Floating Rotors 5.75mm thickness for Competition use only to fit Kawasaki ZX10RR wheel made by Marchesini
-330mm x 5.75mm
-Bobbin-Less
-Exclusive Carrier Technology
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct

Description: TK Dischi Evo 320mm x 5.75mm Ventilated Floating Rotors for Competition use only to fit Yamaha R1/M wheels from 2015 to 2022
FIM Approved
These can be used on the 2021 YZF-R7 as an oversized rotor but will require caliper spacers
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-This would be the correct fit for Aftermarket wheels such as Rotobox Dymag or OZ wheels.
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct

Description: TK Dischi Freno EVO Brake Rotors Ducati Panigale V2 955 and 959 Models

As seen in Moto2, Moto3 and World Superbike! World class level rotors now available for the professional racer or track day junkie!
TK Dischi Freno EVO Ventilated Floating Rotors for Competition use only.

-Sold as a set, Left and Right
-330mm x 5.75mm
-Bobbin-less
-Exclusive Carrier Technology
-Hand-crafted from Billet Metal
-Better Cooling with angled holes in both directions
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

Description: TK Dischi Freno EVO Brake Rotor w/ Carbon Covers Ducati Panigale V4 V4S V4R 1299 D08E-C

As seen in Moto2, Moto3 and World Superbike! World class level rotors now available for the professional racer or track day junkie!
TK Dischi EVO Ventilated Floating Rotors with Carbon Covers, for Competition use only.
These Carbon covers are used to direct airflow into the pistons of the calipers to help cool the braking temperature. Hard braking tracks can overheat brakes so these have been
designed and tested in the Moto2 championship to reduce the braking temperature
-Sold as a set, Left and Right
-330mm x 5.75mm
-Carbon Covers offer cooling to the brake pistons resulting in better performing brakes in Higher brake temperature demanding tracks.
-ABS / Speed sensor compatible
-Bobbin-less
-Exclusive Carrier Technology
-Hand-crafted from Billet Metal and Carbon fiber
-Better Cooling with angled holes drilled in both directions
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

Description: TK Dischi Evo 310mm x 5.75mm Ventilated Floating Rotors for Competition use only to fit Yamaha R6 2005-17 / R1 2007-14 /
This will fit the New 2021-22 Yamaha R7 with spacers.

-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-This would be the correct fit for Aftermarket wheels such as Rotobox Dymag or OZ wheels.
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety

If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct

Description: TK Dischi Freno EVO Front Brake rotors 220mm Moto3 for KTM

Used in Moto3

Description: TK Dischi Freno EVO Rear Rotor 190mm Moto3

This Is Not a rotor for the Light weight Seeker, It Is a Full floating bobbinless Rear Rotor for Professional Racers that need the rear to Work! Period.
Used for the Demands of Moto3 racing where racers are using the rear brake not only to slow the bike into turns but to keep the bike from wheeling while exiting the turn and for holding the line they want.
For best use pair this rotor with the front rotors and one of our Front thumb brake set up or the even more popular left hand lever brake set up as seen on many of the GP bikes and superbikes this year!

This brake is not going to warp on you like some other rotors that are designed to reduce weight but also reduce braking performance.

Description: This Is Not a rotor for the Light weight Seeker, It Is a Rotor for Professional Racers that need the rear to Work! Period.
Used for the Demands of Current Superbike and Moto2 racing where racers are using the rear brake not only to slow the bike into turns but to keep the bike from wheeling while exiting the turn and for holding the line they want.
For best use pair this rotor with the front rotors and one of our Front thumb brake set up or the even more popular left hand lever brake set up as seen on many of the GP bikes and superbikes this year!

This brake is not going to warp on you like some other rotors that are designed to reduce weight but also reduce braking performance.

Description: This Is Not a rotor for the Light weight Seeker, It Is a Rotor for Professional Racers that need the rear to Work! Period.
Used for the Demands of Current Superbike and Moto2 racing where racers are using the rear brake not only to slow the bike into turns but to keep the bike from wheeling while exiting the turn and for holding the line they want.
For best use pair this rotor with the front rotors and one of our Front thumb brake set up or the even more popular left hand lever brake set up as seen on many of the GP bikes and superbikes this year!

This brake is not going to warp on you like some other rotors that are designed to reduce weight but also reduce braking performance.

Description: This Is Not a rotor for the Light weight Seeker, It Is a Rotor for Professional Racers that need the rear to Work! Period.
Used for the Demands of Current Superbike and Moto2 racing where racers are using the rear brake not only to slow the bike into turns but to keep the bike from wheeling while exiting the turn and for holding the line they want.
For best use pair this rotor with the front rotors and one of our Front thumb brake set up or the even more popular left hand lever brake set up as seen on many of the GP bikes and superbikes this year!

This brake is not going to warp on you like some other rotors that are designed to reduce weight but also reduce braking performance.

Description: The Vesrah ZZ Pad Compound is the newest evolution of the Vesrah Racing Brake Compounds. The ZZ Compound outperforms the XX Brake pad compound across all temperature ranges. The RJL-ZZ Brake Pad compound is perfect for the Racer and Aggressive street/ track rider alike looking for more performance across all temperature ranges from their brakes.

*Sold per caliper

Description: Vesrah Brake Pads VD-9088XX

*Sold per caliper

Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.

Description: Vesrah is considered one of the top racing brake pads manufactures.
Fits Kawasaki ZX6R 07-18

The JL Brake Pad compound is the recommended choice for the rear brake where more control and feel is required. The JL compound has less power than the Racing RJL/SRJL brake pads to provide more feel..
Pad compound is resistant to fade related to heat buildup.
No Bedding in of the pad is required before usage
JL Compound is recommended for the Kawasaki 250 Ninja

Description: Vesrah VD-355XX GSXR600/750/1000 04-09 ZX10R 08-15

Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.

Description: Vesrah Brake Pad VD-9043SS

*Sold per caliper

Vesrah is considered one of the top racing brake pads manufactures.

The Special RJL-SS Brake Pad compound is the latest offering by Vesrah. These brake pads are a performance step up from the Super RJL-XX pads. The "SS" pads have a have similar initial "BITE" as Vesrah's infamous SRJL-17 compound. Performance in progressive giving very strong brake performance with a small increase in lever effort. This is Vesrah's top performing pad for the the absolute level of braking performance. Vesrah USA AMA team helped develop the "SS" compound at some of the most demanding braking tracks in the USA, like Road Atlanta and Road America. When you need the maximum performance, the Special RJL-SS compound gives you that extra advantage.
Excellent initial "bite" that is similar to the infamous Vesrah SRJL-17 Compound.
Brake performance is very progressive. Small increase in lever effort translates into a substantial increase in braking force.
Pad compound is resistant to fade related to heat buildup.
No Bedding in of the pad is required before usage.

Description: Vesrah Brake Pad ZD-9068CT

*Sold per caliper

The RJL Brake Pad compound is the perfect choice for Aggressive Street Riders, Track Day Riding and Novice Racers.

Description: Vesrah Brake Pad ZD-9070CT

*Sold per caliper

Will fit :

APRILIA
Caponord 1200 (2013 - 2018)

BMW
F800R (2015 - 2018)
S1000XR (2014 - 2019)
R1200 [R nine T] (2014 - 2018)
R1200GS (2013 - 2018)
R1200GSW (2013 - 2015)
R1200R (2015-2018)
R1200RS (2015)
R1200RT (2014 - 2018)

CAN-AM
Spyder F3 [SE6 / SM6] (2015 - 2016)
Spyder F3-S [SE6 / SM6] (2015 - 2016)
Spyder RS [Brembo Caliper] (2013 - 2016)
Spyder RS-S [Brembo Caliper] (2013 - 2016)
Spyder RT [Brembo Caliper] (2013)
Spyder RT [3 cylinder engine / 6 speed] (2014 - 2016)
Spyder RT LTD [Brembo Caliper] (2013)
Spyder RT LTD [3 cylinder engine / 6 speed] (2014 - 2016)
Spyder RT-S [Brembo Caliper] (2013)
Spyder RT-S [3 cylinder engine / 6 speed] (2014 - 2016)
Spyder ST [Brembo Caliper] (2013 - 2016)
Spyder ST LTD [Brembo Caliper] (2013 - 2016)
Spyder ST-S [Brembo Caliper] (2013 - 2016)

DUCATI
Hypermotard 800 (2013 - 2015)
Hypermotard SP 800 (2013 - 2015)
Hypermotard 939 (2016 - 2019)
Hypermotard SP 939 (2016 - 2019)
Hypersrada 800 (2013 - 2015)
Hyperstrada 939 (2016 - 2019)

Scrambler (2017 - 2019)
Scrambler Classic 800 (2015 - 2019)
Scrambler CR (2017 - 2019)
Scrambler Enduro 800 (2015 - 2016)
Scrambler Flat Track Pro (2016 - 2017)
Scrambler Full Throttle 800 (2015 - 2019)
Scrambler Icon 800 (2015 - 2019)
Scrambler Mac 2.0 (2018 - 2019)
Scrambler Street Classic (2017 - 2019)
Scrambler Urban Endure 800 (2016)
Scrambler-X Desert Sled (2017 - 2019)

Monster 797 (2010)
Monster 797 (2017 - 2019)
Monster+ 797 (2017 - 2019)
Monster 821 (2016 - 2019)
Monster Dark 821 (2015 - 2016)
Monster 1200 (2014 - 2019)

899 Panigale (2014 - 2015)
959 Panigale (2016 - 2019)
959 Panigale Corse (2018 - 2019)

Multistrada 1200 (2015 - 2016)
Multistrada Enduro (2016 - 2019)
Multistrada Enduro Pro (2016 - 2019)

HARLEY DIVIIDSON
KIVEWIRE (2019 - )
Hypermotard SP 800 (2013 - 2015)

MV Agusta
Rivale 800 (2013 - 2018)
Stradale 800 (2015 - 2018)
Turismo Veloce 800 (2014 - 2017)
Turismo Veloce Lusso 800 (2014 - 2018)

TRIUMPH
Street Triple R 765 (2017 - 2019)
Street Triple R Low 765 (2017 - 2018)
Tiger Explorer 1200 (2016 - 2017)
Tiger XCA 1200 (2018)
Tiger XCX 1200 (2018)
Tiger XR 1200 (2018)
Tiger XRT 1200 (2018)
Tiger XRX 1200 (2018)
Tiger XRX Low 1200 (2018)

Vesrah the top racing brake pads manufacture has brought it's world class racing brake technology to the street. The Vesrah RJL-CT Compound (Also know as the ZD-CT Sports Pad)
The RJL-CT Brake Pad compound is the perfect choice for Sport Touring, Gold Wing, Touring and Heavy Cruiser motorcycles.

Description: Item Summary

Motocross master

Description: Extreme Components Brake calipers heatsink for Yamaha FZ8 (2010/2013) - BPR02G
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.