- Home »
- Catalog
HHR Performance » 2014, MV Agusta, F3
Products for:
- Year: 2014
- Make: MV Agusta
- Model: F3
View Universal items for: 2014 MV Agusta F3
Browse Products
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs; 5 Dzus)
Required fitment kit to mount this fairing
• Aluminum support for side panels (2 pcs with 2 Dzus)
• air box inlet tubes
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Racing battery BMZ LiPo, lithium-polymer battery 4.6 Ah
Brake lever Racing blade long, for Brembo master cylinder 19RCS, black anodized, optional with remote adjuster available
Stroke indicator front fork 43 mm, including spring ring
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation. Third button can be used for auxiliary function such as lap timer, tail light or ignition power (incase bike is equipped with ignition key bypass)
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- Available in housing that mounts as back bracket for brake master cylinder.
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline mounting bore.
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm)
- Main functions are ignition circuit activator / breaker and starter activation.
- Third button can be used for auxiliary function such as Lap, Tail light or ignition power.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for all Panigale models with auxiliary quick change (paddle) switch.
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 45 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note !!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black, LAP/Passing (momentary blue).
- Note !!! - To be used with a 5 button left switch Part No.DUP12L5ME+
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Plug and play with OEM connector.
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline mounting bore.
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm).
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs; 5 Dzus)
Required fitment kit to mount this fairing
• Aluminum support for side panels (2 pcs with 2 Dzus)
• air box inlet tubes
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Requires Short supersport tube to make complete tubes
Only to be used with supersport fairing, this version has a larger air inlet and is designed so part of the tube stays attached to the frame while the other parts the fairing so it is easier to work on the front end while upper fairing removed"
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Requires long supersport tubes to make complete tube
Only to be used with supersport fairing, this version has a larger air inlet and is designed so part of the tube stays attached to the frame while the other parts the fairing so it is easier to work on the front end while upper fairing removed"
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Larger air intake openings and room for larger radiator"
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Item 423Speciale, Analogue high sensitive GP ASG Superbike quickshifter/blip sensor for MV Agusta Euro4 bikes with **EAS 2.0 interface. **Note that you must a 3-wire analogue EAS 2.0 interface to the shifter. This shifter replace OEM EAS 2.0 for up and downshift.
Configurable for push or pull linkage (street or race shift).
**For a two wire interface to the shifter you need item 412.
Completely plug and play mounted with Pinbolts and 110 mm aluminum rod and uniballs included. The new developed GP ASG Superbike sensor is a direct plug & play OEM replacement quickshifter/blipper (or only quickshifter) for modern Superbikes and Streetbikes with an analogue 0-5v interface to the ECU.
The GP ASG Superbike sensor greatly improves the gear change performance and gives a superior distinct and smooth gear change feeling similar to top GP and WSBK systems.
The Strain Gauge technology is far more reliable than spring loaded OEM shifters and is fully weather protected.
The GP ASG Superbike is easily configurable for push or pull gear linkage (street or race gear shift).
Replace OEM quickshifter for newer (Euro4) Brutale, Brutale RR, Dragster 800, Dragster 800RR, F3 675, F3 800, Rivale 800, Stradale 800 with 3 wires in quickshifter connector.
Configurable for push or pull linkage.
Pinbolts and std 132 mm aluminum rod included. Some bikes might need different rod length.
Analogue Strain Gauge Load Cell for ECU’s with upshifts and auto blipper for downshifts. Used from advanced ECU’s as Magneti-Marelli, Motec, Mectronik, MotoGP ECUs to many OEM and Flashed ECU’s for street bikes with analogue 0-5v input.
The GP ASG Superbike sensor greatly improves the gear change performance and reliability compared to OEM and other competitors. It gives a superior distinct and smooth gear change performance similar to top GP and WSBK systems.
Compared to OEM and other shifters the Cordona ASG Superbike is faster, more distinct and have smoother action. The bike will use less traction control and not upset chassis under gear changes as much, especially during lean angle.
Item 409 - standard Strain Gauge GP SG Switch for MV Agusta models includes;
@ strain gauge/load cell technology - no movable parts with very distinct and precise gear change
@ sensor design - fully sealed and super durable CNC high precision strain less steel sensor
@ switch quickshifter - can be set to close (t1) or open (t2) the loop for upshift
@ adaptive sensing of direction - upshift configurable for push or pull gear linkage
@ preload - adjustable from 1 to 40kg
@ automatic sensor calibration- a replacement sensor will be automatically calibrated at power up
@ magic threads- M6 right and left threads can be used in both ends
@ connector - 3-way Super Seal connector to bike ECU or PQ8 kit harness
@ 132mm aluminum rod
@ nut - stud kit
This series boasts D.I.D’s patented X-Ring seals, designed from our long-standing experience and success with Rossi in MotoGP to give you the best balance of performance and chain life.
Please note Chain be need to be shortened to fit.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of Hose kits are usually stocked in black, blue and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
*Sold per caliper
Will fit :
HONDA SPORT TOURING MODELS:
2014 - 2015 CB1000RS (AC)
SUZUKI SPORT TOURING MODELS:
2013 - 2015 GSX1300R (Hayabusa)
2013 - 2015 GSX1300R ABS (Hayabusa ABS)
SUZUKI SPORT MODELS:
2011 - 2015 GSX-R600 (Brembo Calipers)
2011 - 2015 GSX-R750 (Brembo Calipers)
2012 - 2015 GSX-R1000 (Brembo Calipers)
APRILIA SPORT MODELS:
2009 - 2014 RSV4 (Factory APRC ABS)
2010 - 2015 RSV4-R (APRC ABS)
BIMOTA MODELS:
2009 - 2014 DB7 (1099cc)
2010 - 2014 DB8 (Bipost 1198cc)
2013 DB8SP (Monopost 1198cc)
2013 - 2014 DB11 (VLX 1200cc)
2014 BB3 (1000cc)
BMW MODELS:
2008 - 2010 HP2 (1100cc)
2008 HP2 (1200cc)
DUCATI MODELS:
2007 - 2009 1098, 1098R
2009 - 2014 1198 (Standard, S, R and SP Models)
2012 - 2015 1199 Panigale (Stnard, S and R Models)
2009 - 2014 1099 Streetfighter
2009 - 2012 1099 Streetfighter S
2010 - 2014 Hypermotard (1100 Evo, Evo SP)
2012 - 2013 848 EVO (Corse Special Edition)
2010 - 2014 848 EVO (Monobloc front calipers)
2014 Superleggera 1198
2007 - 2009 1100S Hypermotard
2008 DD16RR (Desmocedici)
2011 - 2014 Diavel ABS
2012 - 2014 Diavel AMG
2011 - 2014 Diavel Carbon ABS
2011 - 2014 Diavel Chormo
2013 - 2014 Diavel Dark ABS
2013 - 2014 Diavel Strada
2014 Monstar S (1198)
HUSQVARNA MODELS:
2012 - 2014 Nuda 900R ABS
KTM MODELS:
2009 - 2011 SM-R 990
2014 Duke R 690
2008 - 2013 RC8 1190
2010 - 2013 RC8 1190R
2011 - 2013 RC8 1190R Track
2014 Super Duke R (1290cc)
MV AGUSTA MODELS:
2012 - 2013 F3 Serie Oro (675cc)
2011 - Brutale 990R
2010 - 2014 F4 ABS (998cc)
2012 - 2014 F4R (Corsa Corta)
2012 - 2014 F4R ABS (Corsa Corta ABS)
2012 - 2014 F4RR (Corsa Corta)
2012 - 2014 F4RR ABS (Corsa Corta ABS)
2008 - 2011 F4 CC
2008 - 2011 F4 RR
2009 - 2014 Brutale RR
TRIUMPH MODELS:
2011 - 2014 Daytona R Triple 675cc w/ Brembo Calipers
2012 - 2014 Spreedtripple R 1050cc w/ Brembo Calipers
Vesrah the top racing brake pads manufacture has brought it's world class racing brake technology to the street. The Vesrah RJL-CT Compound (Also know as the ZD-CT Sports Pad)
The RJL-CT Brake Pad compound is the perfect choice for Sport Touring, Gold Wing, Touring and Heavy Cruiser motorcycles.
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.