HHR Performance - Product Search
Browse Products
Description:
APEX RACING DEVELOPMENT TITANIUM FORK PINCH BOLT SET VARIOUS SIZES
M8X40 YAMAHA R1 R6
M8X30 DUCATI V4
M6X25 DUCATI PANIGALE (NON V4)
M8X40 Kawasaki ZX10R ZX6R
M8X40 YAMAHA R1 R6
M8X30 DUCATI V4
M6X25 DUCATI PANIGALE (NON V4)
M8X40 Kawasaki ZX10R ZX6R
- Reduce unsprung mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium bolts provides instant 45% weight savings and more than twice tensile strength.
- Safety wire bores - 5 bores.
- Bolt particulars VARIOUS SIZES TO FIT MOST POPULAR RACE MOTORCYCLES: Panigale V4, 1199,1299, 899, 959, Yamaha R1, R6, Kawasaki 636, ZX10R
Note: If you are not sure which size you need give us a call and we will get it sorted.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
Item #: M8X40 YAMAHA R1 R6
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $40.00
Description:
APEX RACING DEVELOPMENT TITANIUM RACE DRILLED BANJO BOLTS VARIOUS SIZES
TIBBSF
TIBBSC
TIBBDC
Our banjo bolts are manufactured for pure performance and reliability:
Safety Wire Bored
High Flow Fluid orifice ( see note 2 )
Compact head size for 11mm wrench
- Single and Double Bolts with fine or coarse thread are available.
Part numbers:
Single Banjo Fine Thread Part# TIBBSF (All Brembo products, OEM European Equipment)
Single Banjo Coarse Thread Part# TIBBSC (Japanese Equipment)
Double Banjo Coarse Thread Part# TIBBDC
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy. Superior strength, weight and corrosion resistance compared to steel hardware.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
Note: For Brembo calipers and master and slave pumps use fine thread pitch at 1.00mm. For most Japanese bikes use coarse thread pitch at 1.25mm
Note2: Most bikes are sold with 2.5mm fluid channel bore. Our banjo bolts are bored at 3.5mm. This is a 20% increase in fluid channel volume.
TIBBSF
TIBBSC
TIBBDC
Our banjo bolts are manufactured for pure performance and reliability:
Safety Wire Bored
High Flow Fluid orifice ( see note 2 )
Compact head size for 11mm wrench
- Single and Double Bolts with fine or coarse thread are available.
Part numbers:
Single Banjo Fine Thread Part# TIBBSF (All Brembo products, OEM European Equipment)
Single Banjo Coarse Thread Part# TIBBSC (Japanese Equipment)
Double Banjo Coarse Thread Part# TIBBDC
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy. Superior strength, weight and corrosion resistance compared to steel hardware.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
Note: For Brembo calipers and master and slave pumps use fine thread pitch at 1.00mm. For most Japanese bikes use coarse thread pitch at 1.25mm
Note2: Most bikes are sold with 2.5mm fluid channel bore. Our banjo bolts are bored at 3.5mm. This is a 20% increase in fluid channel volume.
Item #: FINE TIBBSF
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $10.00
Description:
APEX RACING DEVELOPMENT TITANIUM REAR SPROCKET MOUNTING STUDS NINJA 300, 400, YAMAHA R3, R1
TRSMSNR
- Reduce mass by replacing OEM steel studs with our aircraft grade Titanium set.
- Switching to Titanium bolts provides instant 45% weight savings and more than twice tensile strength.
- Stud particulars M10x40 dual threaded
Fits Kawasaki Ninja 300, 400, Yamaha R3, R1 (with Aftermarket wheels), may fit other models.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.High corrosion resistance
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
- SIX (6) studs per set.
TRSMSNR
- Reduce mass by replacing OEM steel studs with our aircraft grade Titanium set.
- Switching to Titanium bolts provides instant 45% weight savings and more than twice tensile strength.
- Stud particulars M10x40 dual threaded
Fits Kawasaki Ninja 300, 400, Yamaha R3, R1 (with Aftermarket wheels), may fit other models.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.High corrosion resistance
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
- SIX (6) studs per set.
Item #: TRSMSNR
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $69.00
Description:
APEX RACING DEVELOPMENT TITANIUM SWINGARM PINCH BOLT SET DUCATI 848, 1098, 899, 959, 1199, 1299
TSPBSD
- Reduce mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium bolts provides instant 45% weight savings and more than twice tensile strength.
- Safety wire bores - Not bored. We can pre drill them for you at a 10$ charge.
- Bolt particulars M12x40 Allen Tapered bolt with a hollow core.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
- TWO (2) bolts per se
TSPBSD
- Reduce mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium bolts provides instant 45% weight savings and more than twice tensile strength.
- Safety wire bores - Not bored. We can pre drill them for you at a 10$ charge.
- Bolt particulars M12x40 Allen Tapered bolt with a hollow core.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
- TWO (2) bolts per se
Item #: TSPBSD
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $45.00
Description:
TITANIUM TAPERED ALLEN BOLT A SET OF 4 PCS DIN 912
TTABASO4PD
Reduce mass by replacing OEM steel hardware with our aircraft grade Titanium.
Switching to Titanium provides instant 45% weight savings and more than twice tensile strength
Fastener particulars : TAPERED Allen bolt DIN 912. Available in multiple sizes
Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
Designed and manufactured in USA
Our titanium products are manufactured to the highest quality standards and are priced very competitively.
NOTE: PRICE PER 4 PIECE SET Contact us for custom/large quantity pricing.
TTABASO4PD
Reduce mass by replacing OEM steel hardware with our aircraft grade Titanium.
Switching to Titanium provides instant 45% weight savings and more than twice tensile strength
Fastener particulars : TAPERED Allen bolt DIN 912. Available in multiple sizes
Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
Designed and manufactured in USA
Our titanium products are manufactured to the highest quality standards and are priced very competitively.
NOTE: PRICE PER 4 PIECE SET Contact us for custom/large quantity pricing.
Item #: TTABASO4PD
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $13.00
Description:
APEX RACING DEVELOPMENT TITANIUM TORX BOLT VARIOUS SIZES
TTBVS
- Reduce mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium hardware provides instant 45% weight savings and more than twice tensile strength.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
TTBVS
- Reduce mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium hardware provides instant 45% weight savings and more than twice tensile strength.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
Item #: TTVBS
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $3.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS)
APRD-TBERSFART
The switch is a direct plug and play replacement for OEM egnition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
Ideal for racing and street application, to save space and weight where it matters.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
? Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Ideal for racing and street application, to save space and weight where it matters.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
? Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Item #: TBERSFART
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS)
TBERSFA-RSV4
TBERSFA-RSV4
Item #: TBERSFA-RSV4
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) (BREMBO MOUNT INLINE)
APRD-TBERSFARTBMI
APRD-TBERSFARTBMI
The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Item #: TBERSFARTBMI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) (BREMBO MOUNT INLINE)
TBERSFA-RSV4-BMI
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
TBERSFA-RSV4-BMI
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
Item #: TBERSFA-RSV4-BMI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) (BREMBO MOUNT OFFSET)
TBERSFA-RSV4-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - OFFSET fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
TBERSFA-RSV4-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - OFFSET fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
Item #: TBERSFA-RSV4-BMO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE START RACE SWITCH FOR 2019+ KAWASAKI ZX-6R 636 K619R2E
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2E
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
NOTE: We have a brake master mounted version of the switch with inline and offset mounting bores. Part No K619R2ERCSI, K619R2ERCSO
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2E
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
NOTE: We have a brake master mounted version of the switch with inline and offset mounting bores. Part No K619R2ERCSI, K619R2ERCSO
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: K619R2E
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $210.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE START RACE SWITCH FOR YAMAHA R3 2015+ YR3R2
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+
Part No: YR3R2
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. Product picture depicts our switch alongside a Domino forged quick turn throttle.This setup saves room on the handlebar and is much more resilient and durable in case of a crash.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have a brake master mounted version of the switch with inline and offset mounting bores. Part No YR3R2RCSO and YR3R2RCSI
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+
Part No: YR3R2
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. Product picture depicts our switch alongside a Domino forged quick turn throttle.This setup saves room on the handlebar and is much more resilient and durable in case of a crash.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have a brake master mounted version of the switch with inline and offset mounting bores. Part No YR3R2RCSO and YR3R2RCSI
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Item #: YR3R2
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE START RACE SWITCH FOR YAMAHA R3 2015+ BRAKE MOUNTED INLINE YR3R2RCSI
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+ Brake Mounted Inline
Part No: YR3R2RCSI
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Mounts as back bracket for your brake master cylinder. Compatible with OEM, Brembo RCS, Brembo Corsa Corta brake masters. Inline mounting bores. Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. This setup saves room on the handlebar and is much more resilient and durable in case of a crash. Product picture depicts the switch alongside a billet throttle housing.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have an offset mounting bore version of the switch for Billet Brembo master pumps. Part No YR3R2RCSO
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+ Brake Mounted Inline
Part No: YR3R2RCSI
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Mounts as back bracket for your brake master cylinder. Compatible with OEM, Brembo RCS, Brembo Corsa Corta brake masters. Inline mounting bores. Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. This setup saves room on the handlebar and is much more resilient and durable in case of a crash. Product picture depicts the switch alongside a billet throttle housing.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have an offset mounting bore version of the switch for Billet Brembo master pumps. Part No YR3R2RCSO
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Item #: YR3R2RCSI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE START RACE SWITCH FOR YAMAHA R3 2015+ BRAKE MOUNTED OFFSET YR3R2RCSO
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+ Brake Mounted Offset
Part No: YR3R2RCSO
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Mounts as back bracket for your brake master cylinder. Compatible with Brembo billet race pumps. Offset mounting bores. Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. This setup saves room on the handlebar and is much more resilient and durable in case of a crash. Product picture depicts the switch alongside a billet throttle housing.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have an offset mounting bore version of the switch for Billet Brembo master pumps. Part No YR3R2RCSO
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+ Brake Mounted Offset
Part No: YR3R2RCSO
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Mounts as back bracket for your brake master cylinder. Compatible with Brembo billet race pumps. Offset mounting bores. Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. This setup saves room on the handlebar and is much more resilient and durable in case of a crash. Product picture depicts the switch alongside a billet throttle housing.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have an offset mounting bore version of the switch for Billet Brembo master pumps. Part No YR3R2RCSO
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Item #: YR3R2RCSO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 DUP12L5ME
- The switch is a direct plug and play replacement for OEM ignition switch for all Panigale models with auxiliary quick change (paddle) switch.
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 45 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note !!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black, LAP/Passing (momentary blue).
- Note !!! - To be used with a 5 button left switch Part No.DUP12L5ME+
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Plug and play with OEM connector.
- The switch is a direct plug and play replacement for OEM ignition switch for all Panigale models with auxiliary quick change (paddle) switch.
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 45 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note !!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black, LAP/Passing (momentary blue).
- Note !!! - To be used with a 5 button left switch Part No.DUP12L5ME+
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Plug and play with OEM connector.
Item #: TBESFMV-F3/F4
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 (BREMBO MOUNT INLINE)
TBESFMV-F3/F4-BMI
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline mounting bore.
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline mounting bore.
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: TBESFMV-F3/F4-BMI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 (BREMBO MOUNT OFFSET)
TBESFMV-F3/F4-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm).
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm).
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: TBESFMV-F3/F4-BMO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR SUZUKI GSXR 1000 2017+ S117R2E
Two (2) button right handle bar ignition race switch for 2017 GSXR 1000
Part No: S117R2E
- The switch is a direct plug and play replacement for OEM ignition switch for all 2017 SUZUKI GSXR models.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United Kingdom by Otto engineering.
Two (2) button right handle bar ignition race switch for 2017 GSXR 1000
Part No: S117R2E
- The switch is a direct plug and play replacement for OEM ignition switch for all 2017 SUZUKI GSXR models.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United Kingdom by Otto engineering.
Item #: S117R2E
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR SUZUKI GSXR 1000 2017+ (BRAKE MOUNT OFFSET)
TBESFS-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for 2017 Suzuki GSXR 1000
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm) ( WILL NOT FIT RCS AND CORSA CORTA)
- Please see our 3 button model for auziliary Lap or Tail light functions.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for 2017 Suzuki GSXR 1000
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm) ( WILL NOT FIT RCS AND CORSA CORTA)
- Please see our 3 button model for auziliary Lap or Tail light functions.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: TBESFS-BMO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR SUZUKI GSXR 1000 2017+ (BREMBO MOUNT INLINE)
- The switch is a direct plug and play replacement for OEM ignition switch for 2017 Suzuki GSXR 1000
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline Mounting Bore. Fits most brake masters, RCS, Corsa Corta, OEM
- Please see our 3 button model for auziliary Lap or Tail light functions.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for 2017 Suzuki GSXR 1000
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline Mounting Bore. Fits most brake masters, RCS, Corsa Corta, OEM
- Please see our 3 button model for auziliary Lap or Tail light functions.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: BTESFS-BMI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR YAMAHA R6 2008-2016
TBESFY-R6-08-16
- The switch is a direct plug and play replacement for OEM right handlebar engine switch for previous generation Yamaha R6 2008-2016
- Ideal for racing and street application, to save space and weight where it matters.
- Replaces OEM plastic handlebar switch with billet aluminum switch housing, providing weight and space savings and superior crash resistance.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained top), starter activation (momentary bottom)
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connector.
- Also available in master brake cylinder mounted switch housing. Part # YR616R2EMRCS
- The switch is a direct plug and play replacement for OEM right handlebar engine switch for previous generation Yamaha R6 2008-2016
- Ideal for racing and street application, to save space and weight where it matters.
- Replaces OEM plastic handlebar switch with billet aluminum switch housing, providing weight and space savings and superior crash resistance.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained top), starter activation (momentary bottom)
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connector.
- Also available in master brake cylinder mounted switch housing. Part # YR616R2EMRCS
Item #: TBESFY-R6-08-16
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON RACE SWITCH FOR 2019+ KAWASAKI ZX-6R 636 K619R2E
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2E
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
NOTE: We have a brake master mounted version of the switch with inline and offset mounting bores. Part No K619R2ERCSI, K619R2ERCSO
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2E
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
NOTE: We have a brake master mounted version of the switch with inline and offset mounting bores. Part No K619R2ERCSI, K619R2ERCSO
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: K619R2E
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $210.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON RACE SWITCH FOR 2019+ KAWASAKI ZX-6R 636 BRAKE MASTER MOUNTED INLINE K619R2ERCS
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2ERCSI
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters. mounts as a back bracket for your brake master cylinder. ( Inline mounting bores ).
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation. Comes Plug and Play with OEM connector.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2ERCSI
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters. mounts as a back bracket for your brake master cylinder. ( Inline mounting bores ).
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation. Comes Plug and Play with OEM connector.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: K619R2ERCS
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON RACE SWITCH FOR 2019+ KAWASAKI ZX-6R 636 BRAKE MASTER MOUNTED OFFSET K619R2ERCSO
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2ERCSO
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters. mounts as a back bracket for your brake master cylinder. ( Offset mounting bores ).
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation. Comes Plug and Play with OEM connector.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2ERCSO
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters. mounts as a back bracket for your brake master cylinder. ( Offset mounting bores ).
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation. Comes Plug and Play with OEM connector.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: K619R2ERCSO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
Apex Racing Development designed this Switch as a direct plug and play replacement for left handlebar switch for latest generation 2017 Yamaha R6. Ideal for Racing application, to save space and weight where it matters. Switch functions: Traction Control Increase / Decrease while omitting all street functions.
Item #: YR617L2TC
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any
questions.
Price: $231.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON RACE SWITCH FOR YAMAHA R6 2017+
TBRSFY-R6
- The switch is a direct plug and play replacement for OEM left handlebar switch for latest generation Yamaha R6 (2017+)
- Unparalleled weight savings. Only 50 grams. Compare to over 100grm for OEM.
- Switch functions: Traction control Increase + and decrease -
- All street functions are omitted.
- Designed for OEM ECU and harness.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connector.
- Designed for 22 mm standard clip on handle bars.
- For bikes equipped with Flash Tune race package we recommend a 5 button left switch with PIT limiter, launch control and tail light activator. Part #YR617FL5
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- The switch is a direct plug and play replacement for OEM left handlebar switch for latest generation Yamaha R6 (2017+)
- Unparalleled weight savings. Only 50 grams. Compare to over 100grm for OEM.
- Switch functions: Traction control Increase + and decrease -
- All street functions are omitted.
- Designed for OEM ECU and harness.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connector.
- Designed for 22 mm standard clip on handle bars.
- For bikes equipped with Flash Tune race package we recommend a 5 button left switch with PIT limiter, launch control and tail light activator. Part #YR617FL5
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Item #: TBRSFY-R6
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any
questions.
Price: $208.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ROAD & TRACK KILL SWITCH FOR HONDA GROM
HGR2
TWO BUTTON ROAD & TRACK KILL SWITCH FOR HONDA GROM
Part # HGR2
- The switch is a direct plug and play replacement for OEM right handlebar switch for Honda Grom motorcycles (all years)
- Unparalleled weight and space savings. Only 40 grams. Compare to over 100grm for OEM.
Switch functions: Engine Run/Stop, Starter (brake light cabling included)
Completely plug and play.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connectors.
- Designed for 22 mm standard clip on handle bars.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
TWO BUTTON ROAD & TRACK KILL SWITCH FOR HONDA GROM
Part # HGR2
- The switch is a direct plug and play replacement for OEM right handlebar switch for Honda Grom motorcycles (all years)
- Unparalleled weight and space savings. Only 40 grams. Compare to over 100grm for OEM.
Switch functions: Engine Run/Stop, Starter (brake light cabling included)
Completely plug and play.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connectors.
- Designed for 22 mm standard clip on handle bars.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Item #: HGR2
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
Armour Bodies - Yamaha R3 2019-23 Pro Series Supersport Kit 71-0404SS
Item #: 71-0404SS
Condition:
New
Free Ground Shipping
Price: $944.99
Description:
Armour Bodies 2008-16 Yamaha R6 Pro Series - SBK Seat Base 71-0449SSB
Item #: 71-0449SSB
Condition:
New
Price: $149.99
Description:
Armour Bodies 2009-14 Yamaha R1 Supersport Kit - Pro Series 71-0452SS
Item #: 71-0452SS
Condition:
New
Price: $924.99
Description:
Armour Bodies 2015-18 Yamaha R1 Pro Series - SBK Seat base 71-0454SSB
Item #: 71-0454SSB
Condition:
New
Price: $149.99
Description:
Armour Bodies 2017-19 Suzuki GSX-R1000 Pro Series - SBK Seat Base 71-0252SSB
Item #: 71-0252SSB
Condition:
New
Price: $149.99
Description:
Armour Bodies 2017-19 Yamaha R6 Pro Series - SBK Seat Base 71-0456SSB
Item #: 71-0456SSB
Condition:
New
Price: $149.99
Description:
Armour Bodies 71-0130SS Kawasaki Ninja 250 2008-2012 Pro Series Supersport Kit 71-0130SS
Item #: 71-0130SS
Condition:
New
Price: $924.99
Description:
Armour Bodies 71-0340SB Honda RC51 All - Pro Series SuperBike Kit 71-0340SB
Item #: 71-0340SB
Condition:
New
Free Ground Shipping
Price: $974.99
Description:
Armour Bodies 71-0757SS BMW S1000RR 2020-22 Supersport Kit 71-0757SS
Item #: 71-0757SS
Condition:
New
Price: $924.99
Description:
Armour Bodies Aprilia RS660 2021-23 Custom Seat Pad 71-0760PAD
Item #: 71-0760PAD
Condition:
New
Price: $50.00
RS660 Armour Bodies
Description:
Armour Bodies 71-0760SS Aprilia RS660 2021-22 Pro-Series Supersport Kit 71-0760SS
Item #: 71-0760SS
Condition:
New
Price: $959.99
Description:
Armour Bodies BMW S1000RR 2009-14 Superbike Tail Seat Pad 71-0750PAD
Item #: 71-0750PAD
Condition:
New
Price: $50.00
Description:
Armour Bodies BMW S1000RR 2009-2011 Pro Series Superbike Kit Stock Exhaust 71-0751SB
Item #: 71-0751SB
Condition:
New
Price: $974.99
Description:
Armour Bodies BMW S1000RR 2009-2011 Pro Series Superbike Kit..After Market Exhaust 71-0750SB
Item #: 71-0750SB
Condition:
New
Price: $974.99
Description:
Armour Bodies BMW S1000RR 2009-2011 Pro Series SuperSport Kit For Use With Aftermarket Exhaust 71-0750SS
Item #: 71-0750SS
Condition:
New
Price: $924.99
Description:
Armour Bodies BMW S1000RR 2009-2011 Supersport Kit - Pro Series For Use With Stock Exhaust 71-0751SS
Item #: 71-0751SS
Condition:
New
Price: $924.99
Description:
Armour Bodies BMW S1000RR 2012-2014 Pro Series Superbike Kit Aftermarket Exhaust 71-0752SB
Item #: 71-0752SB
Condition:
New
Price: $974.99
Description:
Armour Bodies BMW S1000RR 2012-2014 Pro Series Superbike Kit Stock Exhaust 71-0753SB
Item #: 71-0753SB
Condition:
New
Price: $974.99
Description:
Armour Bodies BMW S1000RR 2012-2014 Pro Series Supersport Kit Aftermarket Exhaust 71-0752SS
Item #: 71-0752SS
Condition:
New
Price: $924.99
Description:
Armour Bodies BMW S1000RR 2015-17 Superbike Tail Seat Base Pad 71-0755PAD
Item #: 71-0755PAD
Condition:
New
Price: $50.00
Description:
Armour Bodies BMW S1000RR 2015-2018 Pro Series Supersport Kit 71-0755SS
Item #: 71-0755SS
Condition:
New
Free Ground Shipping
Price: $924.99
Description:
Armour Bodies BMW S1000RR 2020-22 Superbike Seat Base 71-0757SSB
Item #: 71-0757SSB
Condition:
New
Price: $149.99
Description:
Armour Bodies BMW S1000RR 2020-22 Superbike Tail (15mm Thick) 71-0757PAD
Item #: 71-0757PAD
Condition:
New
Price: $50.00
Description:
Armour Bodies Duc 1199 Panigale Pro Series - Superbike Kit - Belly Pan sold separately 71-0645SB
Item #: 71-0645SB
Condition:
New
Price: $974.99
Description:
Armour Bodies Duc 1199 Panigale Pro Series - Supersport Kit - Belly Pan sold separately 71-0645SS
Item #: 71-0645SS
Condition:
New
Price: $924.99
Description:
Armour Bodies Ducati 1299 Panigale Pro Series - Supersport Kit 71-0647SS
Item #: 71-0647SS
Condition:
New
Free Ground Shipping
Price: $924.99
Description:
Armour Bodies Ducati 748/916/996/998 Pro Series SuperSport Kit 71-0610SS
Item #: 71-0610SS
Condition:
New
Price: $924.99
Description:
Armour Bodies Ducati 749/999 Pro Series SuperSport Kit (uses 05/06 fairing stay and windscreen) 71-0625SS
Item #: 71-0625SS
Condition:
New
Price: $924.99
Description:
Armour Bodies Ducati 848/1098/1198 Pro Series Superbike Kit 71-0640SB
Item #: 71-0640SB
Condition:
New
Price: $974.99
Description:
Armour Bodies Ducati 848/1098/1198 Superbike Lg Air Duct Set 71-0640SB-ADLG
Item #: 71-0640SB-ADLG
Condition:
New
Price: $190.00
Description:
Armour Bodies Ducati 848/1098/1198 SuperBike Tail Seat Pad 71-0640PAD
Item #: 71-0640PAD
Condition:
New
Price: $50.00
Description:
Armour Bodies Ducati 848/1098/1198 Supersport Kit 71-0640SS
Item #: 71-0640SS
Condition:
New
Price: $924.99
Popular Brands:
-
4SR
-
Accossato
-
AiM Sports
-
Akrapovic
-
Alpha Racing Performance Parts
-
Andreani
-
ANTIGRAVITY BATTERIES
-
-
Attack Performance
-
Bell Helmets
-
Bonamici Racing
-
Braketech
-
Brembo
-
BST
-
Capit
-
Carbonin
-
Cordona
-
Cox Racing Group
-
D.I.D Chains
-
Domino
-
Dymag Performance Wheels
-
Extreme Components
-
Factory FX
-
Fren Tubo
-
FTECU
-
Galfer
-
Goodridge
-
GPR
-
Graves Motorsports
-
HHR Performance
-
i2M
-
Ilimberger Carbon
-
KYT Helmets
-
LighTech
-
Liqui Moly
-
Maxem Motorsports
-
Maxima Racing Oils
-
MiVV Exhausts
-
Motion Pro
-
Motoholders
-
MRA
-
MSS Performance
-
MWR
-
Nitron Racing Shocks
-
Öhlins
-
Pro Bolt
-
Qnium
-
Rapid Bike
-
Renthal
-
Rizoma
-
Rotobox
-
Samco Sport
-
SBS Brake Pads
-
SE Moto
-
Sharkskinz
-
SpeedCell
-
Sprint Filter
-
Stringer Stacks
-
SUPERLITE
-
Supreme Technology
-
Suter Racing
-
TCX
-
TechSpec
-
Teknofibra
-
Termignoni
-
Tightails
-
TK Dischi Freno
-
Translogic Systems
-
Vesrah
-
Wera
-
Zero Gravity
- Armour Bodies
- Beringer
- Brocks Performance
- Carbon Smith
- EDR Performance
- Jet Prime
- K-Tech Suspension
- Melotti Racing
- World Wide Bearings